AWS 924-948 - Solid State Logic

AutomationTo start a mix, press Execute. The screen switches to show level bargraphs for the 24 channel faders and the two mainfaders, (for the MIX and REC busses).Channel FadersStereo BusMaster FadersPress End to savethe current MixPass and return tothe List Mix menu.Press Discardto abort thecurrent Mix PassThe system saves a Global Static reference mix of the fader levels and cut status at their positions when the Execute keyis pressed. This is useful because it allows you to locate before the start of the mix and recover your original levels(i.e.reference mix). Also, if you are writing automation in a section that had no previous mix data, when you drop out ofwrite the faders go back to their original levels.Mix RunningPress Play on the DAW to move forward and as soon as the Mix system has locked to the MIDI timecode (MTC), the MixStatus display will indicate ‘Mix Running’. Simply move the faders and press the cut switches to write your mix automation,and the fader moves and cut data will be recorded. The DAW may be toggled freely between Stop and Play and if FastForward is used or the DAW is located forward, the automation data will be extended to the new position and returnedto play.AWS 948You can write automation to the fader for either channel path by pressing the V-pot and switching the main fader’s pathassignment. Automation can not be written on the V-pot - the path must be flipped to the fader. The bargraph colourwill change from light grey to green when the secondary path is flipped to the fader, as shown for faders 18 and 19 above:Automation can be written on both cut switches.Page 7-6AWS 924-948 Operator’s Manual