AWS 924-948 - Solid State Logic

DAW ControlSetting Sends Pre/Post FaderWhen working with sends it is useful to be able to flip a send between pre and post fader.If necessary select the PRE/POST button (4) on the Master Control Panel.Pushing a channel V-pot will now switch the selected send on that channel between pre and post.The red LED below the V-pot lights to show PRE is selected.To change mode on all channels press and hold the OPTION button then press any channel V-pot. All channels will switchto Pre or Post.Muting a Send OutputTo mute a send output select the MUTE button ( 4 ) on the Master Control Panel and push the channel V-pot. Thered LED below the channel V-pot will light to show the channel is muted.To mute or un-mute all channels press and hold the OPTION button then press any channel V-pot. All channels will muteor un-mute.3124913571068 11 12Flipping Send Levels to the FadersTo flip Send levels from the V-pots to the channel faders, press the Master Send V-pot (2) marked ‘Push to Flip’.The channel faders now control the send levels and the fader CUT button will mute the send.The channel V-pot controls panning on stereo sends.In this mode PRE/POST mode is automatically selected for the V-pot switches, so pushing a V-pot will toggle the Sendpre/post selection on that channel. The red LED below the V-pot lights to show PRE is selected.The fader SOLO button will solo the channel, not the send.AWS 924-948 Owner’s Manual Page 4-15