Murano Wardrobe instructions - Mamas & Papas

More documents

Recommendations

Info

Murano Wardrobe V1 30/11/04 15:08 Page 12STEP 17Attach the left (8) andright (9) doors (the rightdoor has a metal badgeon the bottom of thedoor frame) to thewardrobe. Slide thehinge arms onto themounting plates so thatscrew ‘A’ on the hingeplate slots into the keyhole on all of the hingearms, see diagram.Tighten screw ‘A’ on allof the hinge plates.89STEP 18Adjusting the width ofthe gap between thedoors.Turn screw ‘B’ eitherclockwise or anticlockwiseuntil the gapbetween the doors isequal.You will need to loosenscrew ‘A’ before turningscrew ‘B’.Always ensure screw ‘A’is re-tightened beforeusing the wardrobe.- 12 -
Murano Wardrobe V1 30/11/04 15:08 Page 13STEP 19Adjusting the height ofthe doors.Loosen screws ‘C’ on allof the hinge plates.Lift or lower the dooruntil it lines up with thetop of the other doorand re-tighten both ofthe screws.11STEP 20Slot the four handlescrews through the holesin the edges of the doorframes, see diagram.Slot the four handlespacers onto the threadedends of the screws withthe flat ends of thespacers against the doors.Align the threaded holesin the handles with theends of the screws.Tighten the screws intothe handles using a crossheadscrewdriver.NMLEnsure that the curvedend of the handle spacersare fitted around thehandles.- 13 -
Page 1 and 2: Murano Wardrobe V1 30/11/04 15:08 P
Page 3: Murano Wardrobe V1 30/11/04 15:08 P
Page 16: Murano Wardrobe V1 30/11/04 15:08 P

Murano Wardrobe instructions - Mamas & Papas

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?