The LINOS Singlets - Qioptiq Q-Shop
The LINOS Singlets - Qioptiq Q-Shop
The LINOS Singlets - Qioptiq Q-Shop
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Singlets</strong><strong>Singlets</strong>High-power narrowband antireflectivecoating ARHS••High transmission at 1064 nm••Damage threshold > 20 J/cm² for 10 nslaser pulses (1-on-1)••For Nd:YAG laser applicationsSee diagram for details. For moreinformation and custom coatings seechapter Thin Film Coatings.ARHS 1064 nm (on both sides)Ordering Information:To order standard lenses with ARHS1064 nm on both sides simply change thelast three numbers of the order numberto 329Example:Lens xx xxxx with standard ARHS1064 nm coating on both sides:xx xxxx 329A closer lookAll the relevant specifications ofthe lenses, such as materials, radiiand center thicknesses, are includedin the database of the <strong>LINOS</strong>WinLens optical design software.A freeware version of this programis available for download atwww.winlens.de.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420341
Plano-convex lenses, unmounted• Surfaces uncoated• Tolerances: Focal length f': ±2 %,Image distance s': ±2 %ffocal length (object side)f' focal length (image side)s' image distance point secondary vertexØlens diameterdm center thicknessdr edge thicknessh primary vertex (h=dm-dr)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)1.5-4 3x0.063 -0.03 ±0.15-8 3x0.1 -0.04 ±0.110-18 3x0.16 -0.12 ±0.122.4-31.5 3x0.25 -0.15 ±0.240-63 5x0.25 -0.19 ±0.2100 5x0.4 -0.22 ±0.3>100 5x0.63 -0.25 ±0.5Centering accuracy: better than 10‘dm Tolerance(mm)Plano-convex lenses, unmountedf' (mm) Ø (mm) Material dm(mm) dr (mm) s' 588nm(mm) f' 546nm(mm) Order-No1 1.5 N-LaSF9 0.8 0.35 0.57 0.99 G31 2000 0001.5 2 N-LaSF9 0.8 0.32 1.07 1.49 G31 2001 0002 2.5 N-LaSF9 0.8 0.25 1.57 1.99 G31 2002 0002.5 3 N-LaSF9 1 0.38 1.96 2.48 G31 2003 0003 3 N-BK7 1.5 0.34 2.01 2.99 G31 2004 0003.5 3.5 N-BK7 1.8 0.4 2.35 3.49 G31 2005 0004 4 N-BK7 2 0.45 2.68 3.99 G31 2006 0005 5 N-BK7 2.5 0.57 3.35 4.98 G31 2007 0006 6 N-BK7 3 0.68 4.02 5.98 G31 2008 00010 6 N-BaK2 2 1.1 8.82 10.08 G31 2201 0007 7 N-BK7 3.5 0.8 4.69 6.98 G31 2009 0008 8 N-BK7 4 0.91 5.36 7.97 G31 2010 00010 10 N-BK7 5 1.14 6.7 9.96 G31 2011 00015 10 N-BaK4 3 1.4 12.99 14.84 G31 2236 00020 12.5 N-BK7 3.5 1.4 17.9 20.13 G31 2329 00025 12.5 N-BK7 3 1.4 23.27 25.16 G31 2330 00030 12.7 N-BK7 3 1.6 28.03 29.9 G31 2351 00050 12.7 N-BK7 3 2.2 48.41 50.2 G31 2352 00080 12.7 N-BK7 3 2.5 77.88 79.56 G31 2353 000100 12.7 N-BK7 3 2.6 97.12 98.73 G31 2354 000150 12.7 N-BK7 3 2.7 147.36 148.79 G31 2355 000200 12.7 N-BK7 3 2.8 197.17 198.41 G31 2356 000300 12.7 N-BK7 3 2.9 295.99 296.86 G31 2357 000500 12.7 N-BK7 3 2.9 501.87 501.98 G31 2358 0001000 12.7 N-BK7 3 3 981.87 980.2 G31 2359 000342US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Plano-convex lenses, unmounted<strong>Singlets</strong>f' (mm) Ø (mm) Material dm(mm) dr (mm) s' 588nm(mm) f' 546nm(mm) Order-No30 18 N-BK7 4.5 1.7 27.48 30.33 G31 2331 00040 22.4 N-BK7 5 1.7 37.02 40.16 G31 2314 00050 22.4 N-BK7 4.5 2 48.15 50.93 G31 2315 00060 22.4 N-BK7 4 2 59 61.4 G31 2316 00080 22.4 N-BK7 3.5 1.9 78.71 80.71 G31 2317 000100 22.4 N-BK7 3.2 2 99.15 100.88 G31 2318 000150 22.4 N-BK7 3 2.2 149.54 150.94 G31 2319 000200 22.4 N-BK7 2.7 2.1 200.27 201.28 G31 2320 00050 25.4 N-BK7 5 1.8 47.09 50.2 G31 2321 00080 25.4 N-BK7 4 2 77.88 79.56 G31 2322 000100 25.4 N-BK7 4 2.4 96.46 98.73 G31 2323 000150 25.4 N-BK7 4 3 148.87 150.94 G31 2324 000200 25.4 N-BK7 4 3.2 196.51 198.41 G31 2325 000300 25.4 N-BK7 4 3.5 295.33 296.86 G31 2326 000500 25.4 N-BK7 4 3.7 501.22 501.98 G31 2327 0001000 25.4 N-BK7 4 3.8 981.21 980.2 G31 2328 00040 31.5 N-BaK4 8.3 2 34.92 40.04 G31 2401 00050 31.5 N-BaK4 6.7 2 45.99 50.05 G31 2402 00060 31.5 N-BK7 6.3 2.1 57.48 61.4 G31 2332 00080 31.5 N-BK7 5 1.9 77.14 80.14 G31 2403 000100 31.5 N-BK7 4.5 2.1 98.3 100.88 G31 2333 000150 31.5 N-BK7 4 2.4 148.33 150.41 G31 2404 000200 31.5 N-BK7 3.2 2 199.21 200.57 G31 2405 000300 31.5 N-BK7 3 2.2 299.23 300.09 G31 2406 000500 31.5 N-BK7 2.5 2 500.43 500.22 G31 2407 00050 40 N-BK7 11.8 2.6 43.34 50.93 G31 2312 00060 40 N-BK7 9.5 2.4 55.37 61.4 G31 2340 00080 40 N-BK7 7.5 2.3 74.91 79.56 G31 2350 000150 40 N-BK7 5 2.4 148.22 150.94 G31 2341 000100 50 N-BK7 9 2.6 95.33 100.88 G31 2334 000150 50 N-BK7 6.5 2.4 147.23 150.94 G31 2335 00090 63 N-BK7 14.5 2.5 82 91.22 G31 2360 000140 63 N-BK7 10 2.8 134.4 140.47 G31 2361 000200 63 N-BK7 8 3.1 196.78 201.28 G31 2362 000300 63 N-BK7 5.5 2.3 298.7 301.16 G31 2363 000130 100 N-BK7 24 2.5 117.28 132.61 G31 2390 000300 100 N-BK7 10.7 2.5 295.27 301.16 G31 2391 000250 150 N-BK7 27 3.1 232.94 249.79 G31 2364 000330 150 N-BK7 20.5 3.7 325.72 337.93 G31 2365 000500 150 N-BK7 15 4 494.09 501.98 G31 2366 0001000 150 N-BK7 9 3.6 1007.17 1008.83 G31 2367 0002000 150 N-BK7 8.5 5.8 2016.81 2012.83 G31 2368 000Selection guideOur lenses are also available with the following standard, economicallypriced anti-reflective coatings:• ARB 2 UV (250-400 nm), order code -522• ARB 2 VIS (450-700 nm), order code -322• ARB 2 NIR (725-1050 nm), order code -525• ARHS 1064 (Nd:YAG center wavelength at 1064 nm), order code -329When placing an order or requesting a quote, simply replace the"000" in the order number with the order code for the desired coating.For more information please look at the beginning of this chapterrespectively chapter "Thin Film Coatings."Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420343
Plano-convex lenses, unmounted (fused silica)• Surfaces uncoated• Tolerances: Focal length f': ±2 %,Image distance s': ±2 %ffocal length (object side)f' focal length (image side)s' image distance point secondary vertexØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dm-dr)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)8 3x0.063 -0.09 ±0.1510-18 3x0.1 -0.11 ±0.222.4-31.5 3x0.16 -0.13 ±0.240-50 3x0.25 -0.16 ±0.2Centering accuracy: better than 4‘dm Tolerance(mm)A closer lookPlease find further informationabout technical terms and more inthe chapter "Technical Informationon Optics"Plano-convex lenses, unmounted, fabricated from fused silicaf' (mm) Optik-Ø(mm) dm (mm) dr (mm) s' 248nm(mm) f' 248nm(mm) Order-No12.5 8 2.4 1.0 10.91 12.5 G31 2255 00015 10 2.9 1.0 12.83 14.75 G31 2256 00020 12.5 3.5 1.3 17.35 19.67 G31 2257 00025 12.5 3.0 1.3 22.78 24.77 G31 2258 00030 18 4.4 1.5 27.59 30.51 G31 2259 00040 22.4 5.0 1.5 35.38 38.69 G31 2286 00050 22.4 4.1 1.5 46.70 49.42 G31 2300 00060 22.4 3.7 1.6 57.13 59.58 G31 2301 00080 22.4 3.1 1.5 77.40 79.45 G31 2302 000100 22.4 2.8 1.5 97.45 99.31 G31 2303 000200 22.4 2.1 1.5 195.33 196.73 G31 2304 000344US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Plano-convex lenses, unmounted, fabricated from fused silica<strong>Singlets</strong>f' (mm) Optik-Ø(mm) dm (mm) dr (mm) s' 248nm(mm) f' 248nm(mm) Order-No40 31.5 9.5 2.0 33.65 39.95 G31 2411 00050 31.5 7.5 2.1 45.14 50.11 G31 2412 00060 31.5 6.4 2.0 55.75 60.00 G31 2413 00080 31.5 5.2 2.0 76.55 80.00 G31 2414 000100 31.5 4.5 2.0 96.99 99.97 G31 2415 000140 31.5 3.3 1.5 136.09 138.21 G31 2305 000200 31.5 3.3 2.1 198.03 200.22 G31 2416 000300 31.5 3.0 2.2 298.66 300.65 G31 2417 000400 31.5 2.1 1.5 390.96 392.35 G31 2306 00080 40 7.0 1.7 74.81 79.45 G31 2253 000140 40 4.8 1.9 135.09 138.27 G31 2254 000100 50 8.5 1.8 93.67 99.31 G31 2242 000150 50 6.1 1.8 144.54 148.59 G31 2243 000200 50 5.1 1.9 193.34 196.73 G31 2244 000250 50 4.4 1.9 244.74 247.66 G31 2245 000500 50 4.4 3.1 491.24 494.16 G31 2246 0001000 50 4.4 3.8 983.05 985.97 G31 2247 000A closer lookAll the relevant specifications ofthe lenses, such as materials, radiiand center thicknesses, are includedin the database of the <strong>LINOS</strong>WinLens optical design software.A freeware version of this programis available for download atwww.winlens.de.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420345
Plano-convex lenses, mounted• Lens mounts fit to Microbench Í orNanobench n• Also available in UV-grade fused silica• Surfaces uncoated• Tolerances: Focal length f': ±2 %,Image distance s': ±2 %ffocal length (object side)f' focal length (image side)s' image distance point secondary vertexØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dm-dr)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)1.5-4 3x0.063 -0.03 ±0.15-8 3x0.1 -0.04 ±0.110-18 3x0.16 -0.12 ±0.122.4-31.5 3x0.25 -0.15 ±0.240-63 5x0.25 -0.19 ±0.2100 5x0.4 -0.22 ±0.3>100 5x0.63 -0.25 ±0.5Centering accuracy: better than 10‘dm Tolerance(mm)Plano-convex lenses, mountedMountf'(mm)Optics-Ø(mm)MaterialOuter-ØD(mm)Clear-Ø(mm)dm(mm)dr(mm)s' 588nm(mm)f' 546nm(mm)Order-Non 2.5 3 N-LaSF9 16 2.5 1 0.38 1.96 2.48 G05 2101 000n 3 3 N-BK7 16 2.5 1.5 0.34 2.01 2.99 G05 2102 000n 5 5 N-BK7 16 4 2.5 0.57 3.35 4.98 G05 2103 000n 6 6 N-BK7 16 5 3 0.68 4.02 5.98 G05 2104 000n 10 6 N-BaK2 16 5 2 1.1 8.82 10.08 G05 2105 000n 8 8 N-BK7 16 7 4 0.91 5.36 7.97 G05 2106 000n 10 10 N-BK7 16 9 5 1.14 6.7 9.96 G05 2107 000n 15 10 N-BaK4 16 9 3 1.4 12.99 14.84 G05 2108 000n 20 12.5 N-BK7 16 11.5 3.5 1.4 17.9 20.13 G05 2109 000n 25 12.5 N-BK7 16 11.5 3 1.4 23.27 25.16 G05 2110 000n 30 12.7 N-BK7 16 11.5 3 1.6 28.03 29.9 G05 2111 000n 50 12.7 N-BK7 16 11.5 3 2.2 48.41 50.2 G05 2112 000n 80 12.7 N-BK7 16 11.5 3 2.5 77.88 79.56 G05 2113 000n 100 12.7 N-BK7 16 11.5 3 2.6 97.12 98.73 G05 2114 000n 150 12.7 N-BK7 16 11.5 3 2.7 147.36 148.79 G05 2115 000n 200 12.7 N-BK7 16 11.5 3 2.8 197.17 198.41 G05 2116 000n 300 12.7 N-BK7 16 11.5 3 2.9 295.99 296.86 G05 2117 000n 500 12.7 N-BK7 16 11.5 3 2.9 501.87 501.98 G05 2118 000n 1000 12.7 N-BK7 16 11.5 3 3 981.87 980.2 G05 2119 000346US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Plano-convex lenses, mounted<strong>Singlets</strong>Mountf'(mm)Optics-Ø(mm)MaterialOuter-ØD(mm)Clear-Ø(mm)dm(mm)dr(mm)s' 588nm(mm)f' 546nm(mm)Order-NoÍ 30 18 N-BK7 25 17 4.5 1.7 27.48 30.33 G06 3042 000Í 40 22.4 N-BK7 25 21.4 5 1.7 37.02 40.16 G06 3043 000Í 50 22.4 N-BK7 25 21.4 4.5 2 48.15 50.93 G06 3044 000Í 60 22.4 N-BK7 25 21.4 4 2 59 61.4 G06 3045 000Í 80 22.4 N-BK7 25 21.4 3.5 1.9 78.71 80.71 G06 3046 000Í 100 22.4 N-BK7 25 21.4 3.2 2 99.15 100.88 G06 3047 000Í 150 22.4 N-BK7 25 21.4 3 2.2 149.54 150.94 G06 3048 000Í 200 22.4 N-BK7 25 21.4 2.7 2.1 200.27 201.28 G06 3049 000Í 50 25.4 N-BK7 30 24 5 1.8 47.09 50.2 G06 3821 000Í 80 25.4 N-BK7 30 24 4 2 77.88 79.56 G06 3822 000Í 100 25.4 N-BK7 30 24 4 2.4 96.46 98.73 G06 3823 000Í 150 25.4 N-BK7 30 24 4 3 148.87 150.94 G06 3824 000Í 200 25.4 N-BK7 30 24 4 3.2 196.51 198.41 G06 3825 000Í 300 25.4 N-BK7 30 24 4 3.5 295.33 296.86 G06 3826 000Í 500 25.4 N-BK7 30 24 4 3.7 501.22 501.98 G06 3827 000Í 1000 25.4 N-BK7 30 24 4 3.8 981.21 980.2 G06 3828 000Í 40 31.5 N-BaK4 35 30 8.3 2 34.92 40.04 G06 3101 000Í 50 31.5 N-BaK4 35 30 6.7 2 45.99 50.05 G06 3102 000Í 60 31.5 N-BK7 35 30 6.3 2.1 57.48 61.4 G06 3051 000Í 80 31.5 N-BK7 35 30 5 1.9 77.14 80.14 G06 3103 000Í 100 31.5 N-BK7 35 30 4.5 2.1 98.3 100.88 G06 3052 000Í 150 31.5 N-BK7 35 30 4 2.4 148.33 150.41 G06 3104 000Í 200 31.5 N-BK7 35 30 3.2 2 199.21 200.57 G06 3105 000Í 300 31.5 N-BK7 35 30 3 2.2 299.23 300.09 G06 3106 000Í 500 31.5 N-BK7 35 30 2.5 2 500.43 500.22 G06 3107 000Í In mount fitting directly to Microbench,n In mount fitting directly to Nanobench,please look on page 239 for mount dimensions.StandardPlusIf you require standard lenses with a smaller diameter please contactour sales team for a quick price information. We can easily downsizeour standard lenses as StandardPlus-option.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420347
Plano-convex lenses, mounted (fused silica)• Lens mounts fit to Microbench Í orNanobench n• Surfaces uncoatedffocal length (object side)f' focal length (image side)s' image distance point secondary vertexØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dm-dr)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)8 3x0.063 -0.09 ±0.1510-18 3x0.1 -0.11 ±0.222.4-31.5 3x0.16 -0.13 ±0.240-50 3x0.25 -0.16 ±0.2Centering accuracy: better than 4‘dm Tolerance(mm)Plano-convex lenses, mounted, fabricated from fused silicaMount f' (mm) Optics-Ø(mm)Outer-ØD(mm)Clear-Ø(mm)dm (mm) dr (mm) s' 248nm(mm)f' 248nm(mm)Order-Non 12.5 8 16 7 2.4 1.0 10.91 12.5 G05 2120 000n 15 10 16 9 2.9 1.0 12.83 14.75 G05 2121 000n 20 12.5 16 11.5 3.5 1.3 17.35 19.67 G05 2122 000n 25 12.5 16 11.5 3.0 1.3 22.78 24.77 G05 2123 000Í 30 18 25 17 4.4 1.5 27.59 30.51 G06 3338 000Í 40 22.4 25 21.4 5.0 1.5 35.38 38.69 G06 3050 000Í 50 22.4 25 21.4 4.1 1.5 46.70 49.42 G06 3339 000Í 60 22.4 25 21.4 3.7 1.6 57.13 59.58 G06 3340 000Í 80 22.4 25 21.4 3.1 1.5 77.40 79.45 G06 3341 000Í 100 22.4 25 21.4 2.8 1.5 97.45 99.31 G06 3342 000Í 200 22.4 25 21.4 2.1 1.5 195.33 196.73 G06 3343 000Í 40 31.5 35 30 9.5 2.0 33.65 39.95 G06 3111 000Í 50 31.5 35 30 7.5 2.1 45.14 50.11 G06 3112 000Í 60 31.5 35 30 6.4 2.0 55.75 60.00 G06 3113 000Í 80 31.5 35 30 5.2 2.0 76.55 80.00 G06 3114 000Í 100 31.5 35 30 4.5 2.0 96.99 99.97 G06 3115 000Í 140 31.5 35 30 3.3 1.5 136.09 138.21 G06 3366 000Í 200 31.5 35 30 3.3 2.1 198.03 200.22 G06 3116 000Í 300 31.5 35 30 3.0 2.2 298.66 300.65 G06 3117 000Í 400 31.5 35 30 2.1 1.5 390.96 392.35 G06 3367 000Í In mount fitting directly to Microbench,n In mount fitting directly to Nanobench,please look on page 239 for mount dimensions.348US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Symmetric-convex lenses, unmounted, dia. 6 - 22.4 mm<strong>Singlets</strong>• Precision designed for 1:1 imaging• Surfaces uncoatedf focal length (object side)f' focal length (image side)s object distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh, h' sagital height primary/secondaryvertex;h, h' = (dm-dr) / 2 for symmetric biconvexlensesF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)6-8 3x0.1 -0.09 ±0.110-18 3x0.16 -0.12 ±0.222.4 3x0.25 -0.13 ±0.2Centering accuracy: alle 10‘dm Tolerance(mm)High quality<strong>Qioptiq</strong> uses glass from established manufacturers in the productionof precision optics components. This ensures the consistent highquality of our lenses, achromatic lenses and plano-optics.Symmetric-convex lenses, unmounted, dia. 6 - 22.4 mmf' (mm) Ø (mm) Material dm(mm) dr (mm) s, s' 588nm(mm)f' 546nm(mm)Order-No5 6 N-BaK4 2.9 0.9 3.95 4.97 G31 1328 0007 8 N-BaK4 3.4 1.1 6.00 7.14 G31 1329 00010 10 N-BaK4 3.5 1.0 8.78 9.93 G31 1300 00012.5 12.5 N-BK7 4.5 1.0 10.79 12.33 G31 1377 00015 12.7 N-BK7 4.0 1.1 13.58 14.91 G31 1381 00020 12.7 N-BK7 3.0 0.9 18.94 19.88 G31 1382 00030 12.7 N-BK7 3.0 1.6 28.80 29.70 G31 1383 00050 12.7 N-BK7 3.0 2.2 48.92 49.74 G31 1384 00080 12.7 N-BK7 3.0 2.5 78.03 78.73 G31 1385 000100 12.7 N-BK7 3.0 2.6 99.08 99.70 G31 1386 000150 12.7 N-BK7 3.0 2.7 148.50 148.90 G31 1387 00016 18 N-BK7 7.0 1.1 13.43 15.88 G31 1378 00020 22.4 N-BK7 8.8 1.6 17.05 20.13 G31 1338 00025 22.4 N-BK7 7.0 1.6 22.40 24.74 G31 1308 00030 22.4 N-BK7 6.3 2.0 28.01 30.06 G31 1310 00040 22.4 N-BK7 5.0 2.0 39.66 41.20 G31 1314 00050 22.4 N-BK7 4.5 2.1 49.88 51.19 G31 1315 00060 22.4 N-BK7 4.0 2.0 59.94 61.05 G31 1316 00080 22.4 N-BK7 3.5 2.0 80.24 81.10 G31 1317 000100 22.4 N-BK7 3.5 2.3 100.44 101.22 G31 1318 000150 22.4 N-BK7 3.0 2.2 150.65 151.08 G31 1319 000200 22.4 N-BK7 3.0 2.4 202.51 202.75 G31 1320 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420349
Symmetric-convex lenses, unmounted,dia. 25.4 - 100mm• Precision designed for 1:1 imaging• Surfaces uncoated• Tolerances: Focal length f' : ± 2 %,Image distance s' : ± 2 %f focal length (object side)f' focal length (image side)s object distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh, h' sagital height primary/secondaryvertex;h, h' = (dm-dr) / 2 for symmetric biconvexlensesF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)25.4-31.5 3x0.25 -0.07 ±0.240 5x0.25 -0.07 ±0.2100 5x0.4 -0.08 ±0.5Centering accuracy: all 3‘dm Tolerance(mm)Symmetric-convex lenses, unmounted, dia. 25.4 - 100 mmf' (mm) Ø (mm) Material dm(mm) dr (mm) s, s' 588nm(mm)f' 546nm(mm)Order-No30 25.4 N-BK7 7.0 1.4 27.89 30.18 G31 1321 00050 25.4 N-BK7 7.0 3.8 48.24 50.42 G31 1322 00080 25.4 N-BK7 7.0 5.0 77.36 79.41 G31 1323 000100 25.4 N-BK7 7.0 5.4 98.41 100.40 G31 1324 000150 25.4 N-BK7 7.0 6.0 147.80 149.60 G31 1325 00030 31.5 N-SK2 9.5 2.0 27.03 30.02 G31 1331 00040 31.5 N-BK7 8.3 2.1 39.09 41.77 G31 1339 00050 31.5 N-BK7 7.0 2.1 49.45 51.62 G31 1351 00070 31.5 N-BK7 5.5 2.1 69.57 71.15 G31 1357 000100 31.5 N-BK7 4.8 2.4 98.41 100.00 G31 1333 000130 31.5 N-BK7 4.0 2.2 129.30 130.14 G31 1335 00050 40 N-BK7 10.0 2.1 48.92 52.14 G31 1340 00065 40 N-BK7 8.0 1.9 63.78 66.23 G31 1341 00080 40 N-BK7 6.8 1.9 79.68 81.66 G31 1343 000100 40 N-BK7 6.0 2.1 100.02 101.64 G31 1344 000150 40 N-BK7 4.5 1.9 150.40 151.33 G31 1345 000200 40 N-BK7 4.0 2.1 202.35 202.92 G31 1346 000250 40 N-BK7 3.5 2.0 251.35 251.57 G31 1347 000300 40 N-BK7 3.3 2.0 305.40 305.36 G31 1348 000500 40 N-BK7 2.8 2.0 505.83 504.87 G31 1352 0001000 40 N-BK7 2.4 2.0 1009.76 1006.81 G31 1355 000150 100 N-BK7 19.5 3.1 147.86 153.86 G31 1368 000350US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Symmetric-convex lenses, unmounted (fused silica)• Precision designed for 1:1 imaging<strong>Singlets</strong>• Surfaces uncoatedf focal length (object side)f' focal length (image side)s object distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh, h' sagital height primary/secondaryvertex;h, h' = (dm-dr) / 2 for symmetric biconvexlensesF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)6 3x0.063 -0.09 ±0.1510-18 3x0.1 -0.13 ±0.222.4-31.5 3x0.16 -0.13 ±0.240-50 3x0.25 -0.16 ±0.2Centering accuracy: better than 4‘dm Tolerance(mm)Symmetric-convex lenses, unmounted, fabricated from fused silicaf' (mm) Ø (mm) dm (mm) dr (mm) s, s' 248 nm(mm) f' 248nm(mm) Order-No5 6 3.0 1.0 4.38 5.48 G31 1202 00010 10 4.0 1.2 8.71 10.13 G31 1203 00012.5 12.5 4.7 1.0 10.52 12.20 G31 1204 00016 12.5 3.8 1.2 14.82 16.13 G31 1205 00020 18 5.8 1.4 18.33 20.36 G31 1206 00025 22.4 7.0 1.6 22.79 25.23 G31 1026 00030 22.4 6.0 1.5 27.50 29.56 G31 1207 00040 22.4 4.9 1.7 38.05 39.71 G31 1208 00050 22.4 4.2 1.6 47.89 49.30 G31 1209 00060 22.4 3.7 1.6 58.82 60.06 G31 1210 00080 22.4 3.3 1.7 76.47 77.57 G31 1027 000100 22.4 2.9 1.6 97.88 98.85 G31 1211 000150 22.4 2.4 1.6 146.77 147.57 G31 1212 000200 22.4 2.2 1.6 195.90 196.63 G31 1213 00030 31.5 11.5 2.0 25.97 30.06 G31 1711 00040 31.5 8.6 2.0 37.10 40.06 G31 1712 00050 31.5 7.3 2.2 47.52 50.00 G31 1713 00060 31.5 6.2 2.0 57.95 60.04 G31 1714 00080 31.5 5.1 2.0 78.37 80.08 G31 1715 000100 31.5 4.5 2.0 98.64 100.14 G31 1716 000120 31.5 4.1 2.1 118.72 120.09 G31 1718 00050 40 10.5 2.2 47.49 51.10 G31 1192 000100 40 6.0 2.0 97.36 99.37 G31 1193 000125 40 5.0 1.8 122.99 124.66 G31 1194 000160 40 4.5 2.0 157.41 158.91 G31 1195 000200 40 4.0 2.0 195.60 196.93 G31 1196 000100 50 8.4 1.9 95.55 98.37 G31 1220 000150 50 6.2 2.0 146.14 148.21 G31 1221 000200 50 5.1 2.0 195.41 197.11 G31 1222 000250 50 4.5 2.0 246.33 247.83 G31 1223 000500 50 4.4 3.1 492.25 493.72 G31 1224 0001000 50 4.4 3.8 989.98 991.44 G31 1225 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420351
Best form lenses, unmounted• Precision lenses for use at infiniteobject distance• Spherical (aperture-dependent)aberration minimized• N-BK7 lenses with ARB2 coating• Mounted or unmounted• Mounted lenses fit to Microbench Í orNanobenchΕ Broadband anti-reflection coatingARB2 for the visible spectral range (R
<strong>Singlets</strong>ff'ss'ee'focal length (object side)focal length (image side)object distanceimage distancedistance, primary principal pointprimary vertex (e=f-s)distance, secondary principal pointsecondary vertex (e'=f'-s')lens diametercenter thicknessedge thicknessprimary vertexsagittal height secondary vertexØdmdrhh'F, F' focal pointsH, H' principal points<strong>Singlets</strong>Tolerances:Focal length f': ±2%Image distance s': ±2%A closer lookPlease find further informationabout technical terms and more inthe chapter "Technical Informationon Optics"Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420357
Best form lenses, mounted• Precision lenses for use at infiniteobject distance• Spherical (aperture-dependent)aberration minimized• N-BK7 lenses with ARB2 coating• Mounted or unmounted• Mounted lenses fit to Microbench Í orNanobenchΕ Broadband anti-reflection coatingARB2 for the visible spectral range (R
<strong>Singlets</strong>ff'ss'ee'focal length (object side)focal length (image side)object distanceimage distancedistance, primary principal pointprimary vertex (e=f-s)distance, secondary principal pointsecondary vertex (e'=f'-s')lens diametercenter thicknessedge thicknessprimary vertexsagittal height secondary vertexØdmdrhh'F, F' focal pointsH, H' principal points<strong>Singlets</strong>Tolerances:Focal length f': ±2%Image distance s': ±2%dm (mm) dr (mm) ØTole rance(mm)h (mm) h' (mm) s' 633nm(mm) f' 546nm(mm) Order-No2.0 1.6 -0.06 0.33 0.05 4.90 6.02 G05 2216 0003.0 1.8 -0.02 1.20 0.00 2.50 4.14 G05 2124 0003.0 2.3 -0.02 0.70 0.00 4.51 6.17 G05 2125 0002.2 1.3 -0.03 0.81 0.12 8.90 10.11 G05 2217 0002.6 1.3 -0.04 1.01 0.25 18.80 20.04 G05 2218 0004.5 1.7 -0.04 2.33 0.45 27.83 30.12 G06 3094 0004.5 2.1 -0.06 2.01 0.43 97.75 99.50 G06 3003 0004.0 2.4 -0.06 1.38 0.24 147.75 148.96 G06 3004 0004.0 2.8 -0.06 0.97 0.24 198.76 199.48 G06 3005 000A closer lookAll the relevant specifications of the lenses, such asmaterials, radii and center thicknesses, are includedin the database of the <strong>LINOS</strong> WinLens optical designsoftware. A freeware version of this program isavailable for download at www.winlens.de.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420359
Concave-Convex Lenses• Crown Glass is primarily for use inillumination systems• Fused Silica is suitable forDUV-applications• Positive meniscus lenses• Mounted lenses fit to Microbench Í• Surfaces uncoatedffocal length (object side)f' focal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertexh' sagittal height secondary vertexF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)22.4 3x0.16 -0,13 ±0.240-42 5x0.25 -0,16 ±0.2Centering accuracy: better than 10‘dm Tolerance(mm)Concave-Convex Lenses, unmounted (crown glass)Material f' (mm) Ø (mm) dm (mm) dr (mm) h (mm) h' (mm) s' 588nm(mm)f' 546nm(mm)Order-NoN-BaK4 50 22.4 4.0 1.4 3.4 1.0 45.69 49.03 G31 5505 000B270 60 40 10.8 2.7 9.7 1.6 50.10 58.32 G31 5540 000B270 110 40 7.0 3.1 6.2 2.3 100.73 107.53 G31 5545 000N-ZK7 150 42 5.0 1.8 5.6 2.5 142.23 147.61 G31 5551 000Concave-Convex Lenses, unmounted (fused silica)f' (mm) Ø (mm) dm (mm) dr (mm) h (mm) h' (mm) s' 248nm(mm) f' 248nm(mm) Order-No50 22.4 4.2 1.4 3.76 0.95 45.48 49.24 G31 5506 000145 42 5.2 1.9 5.89 2.57 136.38 142.57 G31 5553 000Q-enabledBesides high-quality standard optics, <strong>Qioptiq</strong> is a provider of customdesignedoptics. For customized optics and higher volumes please contactour sales team for your individual quotation.360US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong><strong>Singlets</strong>Mounted concave-convex lensesConcave-Convex Lenses, mounted (crown glass)MountMaterialf'(mm)Optics-Ø(mm)Outer-ØD(mm)Clear Ø(mm)dm(mm)dr(mm)h(mm)h'(mm)s' 588nm(mm)f' 546nm(mm)Order-NoÍ N-BaK4 50 22.4 25 21.4 4.0 1.6 3.4 1.0 45.69 49.03 G06 3076 000Í In mount fitting directly to Microbench, please look on page 239 for mount dimensions.Concave-Convex Lenses, mounted (fused silica)Mountf'(mm)Optics-Ø(mm)Outer-Ø D(mm)Clear Ø(mm)dm(mm)dr(mm)h(mm)h'(mm)s 248nm(mm)s' 248nm(mm)f' 248nm(mm)Order-NoÍ 50 22.4 25 21.4 4.2 1.4 3.76 0.95 -50.29 45.48 49.24 G06 3077 000Í In mount fitting directly to Microbench, please look on page 239 for mount dimensions.Selection GuidePlease view chapter "Mounts, Posts and Holders" for a selection ofoptic and lens holder for unmounted optics.G03 6036 000 G03 6004 000 G03 6186 000 G03 6035 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420361
Plano-concave lenses, unmounted (N-BK7)• Surfaces uncoated• Tolerances: Focal length f' : ± 2 %,Image distance s' : ± 2 %Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)3 3x0.063 -0.09 ±0.16-8 3x0.1 -0.09 ±0.110-12.7 3x0.16 -0.12 ±0.122.4-25.4 3x0.25 -0.15 ±0.2Centering accuracy: better than 10‘dm Tolerance(mm)Plano-concave lenses, unmounted (N-BK7)f' (mm) Ø (mm) dm(mm) dr (mm) s' 588nm(mm)f' 546nm(mm)Order-Noffocal length (object side)f' focal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dr-dm)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%-3 3 0.5 1.66 -3.33 -2.99 G31 4000 000-6 6 0.5 2.82 -6.33 -5.98 G31 4001 000-10 6 1.0 2.0 -10.36 -9.66 G31 4304 000-8 8 1.0 4.09 -8.66 -7.97 G31 4002 000-10 10 1.0 4.86 -10.66 -9.96 G31 4003 000-16 10 1.5 3.1 -17.39 -16.34 G31 4305 000-30 12.7 1.5 2.9 -31.00 -29.90 G31 4331 000-50 12.7 1.5 2.3 -51.38 -50.20 G31 4332 000-100 12.7 1.5 1.9 -100.99 -98.73 G31 4333 000-200 12.7 1.5 1.7 -200.15 -198.41 G31 4334 000-500 12.7 1.5 1.6 -504.88 -502.00 G31 4335 000-1000 12.7 1.5 1.5 -1013.60 -1009.00 G31 4336 000-40 22.4 1.5 4.8 -41.30 -40.16 G31 4301 000-50 22.4 1.5 4.0 -51.38 -50.20 G31 4315 000-100 22.4 1.5 2.7 -102.25 -100.88 G31 4316 000-150 22.4 1.5 2.3 -152.50 -150.99 G31 4317 000-50 25.4 1.5 4.8 -5138 -50.20 G31 4321 000-100 25.4 1.5 3.1 -100.09 -98.73 G31 4322 000-200 25.4 1.5 2.2 -203.03 -201.30 G31 4323 000-500 25.4 1.5 1.8 -504.86 -502.00 G31 4324 000-1000 25.4 1.5 1.7 -1013.60 -1009.00 G31 4325 000Selection guideTo realize concave mirrors, we offer the following standard, economically priced metallic mirror coatings forour Plane concave lenses:• Aluminum mirror coating: RAL (400-3000 nm), order code -331• Silver mirror coating: RAGV (450-3000 nm), order code -400When placing an order or requesting a quote, simply replace the "000" in the order number with the ordercode for the desired coating. For more information please look at chapter "Thin Film Coatings."362US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Plano-concave lenses, unmounted (fused silica)<strong>Singlets</strong>• Surfaces uncoated• Tolerances: Focal length f' : ± 2 %,Image distance s' : ± 2 %Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)6 3x0.063 -0.09 ±0.1510-12.7 3x0.1 -0.11 ±0.222.4 3x0.16 -0.13 ±0.225.4 5x0.1 -0.13 ±0.2Centering accuracy: all 4‘dm Tolerance(mm)StandardPlusIf you require standard plano optics with a smaller diameter pleasecontact our sales team for a quick price information. We can easilydownsize our standard plano optics as StandardPlus-option.ffocal length (object side)f' focal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dr-dm)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Plano-concave lenses, unmounted (fabricated from fused silica)f'(mm)Ø(mm)dm(mm)dr(mm)s' 248nm(mm) f' 248nm(mm) Order-No-10 6 1.0 2.0 -10.52 -9.85 G31 4419 000-16 10 1.0 2.7 -16.74 -16.08 G31 4420 000-20 12.7 4.0 6.0 -22.32 -19.66 G34 0160 000-50 12.7 5.3 6.0 -53.62 -50.10 G34 0162 000-100 12.7 5.6 6.0 -102.27 -98.56 G34 0164 000-200 12.7 5.8 6.0 -200.48 -196.64 G34 0168 000-300 12.7 5.9 6.0 -298.12 -294.21 G34 0170 000-500 12.7 5.9 6.0 -497.85 -493.93 G34 0174 000-700 12.7 5.9 6.0 -691.63 -687.72 G34 0176 000-1000 12.7 6.0 6.0 -989.51 -985.53 G34 0178 000-1400 12.7 6.0 6.0 -1376.17 -1372.20 G34 0180 000-2000 12.7 6.0 6.0 -1970.35 -1966.38 G34 0182 000-3000 12.7 6.0 6.0 -2946.07 -2942.09 G34 0184 000-4000 12.7 6.0 6.0 -3927.49 -3923.51 G34 0186 000-6000 12.7 6.0 6.0 -5916.68 -5912.70 G34 0188 000-10000 12.7 6.0 6.0 -10440.00 -10439.10 G34 0190 000-24000 12.7 6.0 6.0 -23880.00 -23879.68 G34 0192 000-40 22.4 1.5 4.9 -40.51 -39.52 G31 4421 000-50 22.4 1.5 4.1 -51.10 -50.11 G31 4422 000-100 22.4 1.5 2.8 -100.26 -99.27 G31 4423 000-150 22.4 1.5 2.3 -149.51 -148.52 G31 4424 000-500 25.4 5.7 6.0 -497.85 -493.93 G34 0175 000-700 25.4 5.8 6.0 -691.63 -687.72 G34 0177 000-1000 25.4 5.8 6.0 -989.51 -985.53 G34 0179 000-2000 25.4 5.9 6.0 -1970.35 -1966.38 G34 0183 000-4000 25.4 6.0 6.0 -3927.49 -3923.51 G34 0187 000-6000 25.4 6.0 6.0 -5916.68 -5912.70 G34 0189 000-10000 25.4 6.0 6.0 -10440.00 -10439.10 G34 0191 000-24000 25.4 6.0 6.0 -23880.00 -23879.68 G34 0193 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420363
Plano-concave lenses, mounted (N-BK7)• Mounted lenses fit to Microbench Í orNanobench n• Surfaces uncoatedffocal length (object side)ffocal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dr-dm)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)3 3x0.063 -0.09 ±0.16-8 3x0.1 -0.09 ±0.110-12.7 3x0.16 -0.12 ±0.122.4-25.4 3x0.25 -0.15 ±0.2Centering accuracy: better than 10‘dm Tolerance(mm)Plano-concave lenses, mounted (N-BK7)f' (mm)Optics-Ø(mm)Outer-Ø D(mm)Clear Ø(mm)dm(mm)dr(mm)s' 588nm(mm) f' 546nm(mm) Order-Non -3 3 16 2.5 0.5 1.66 -3.33 -2.99 G05 2301 000n -6 6 16 5 0.5 2.82 -6.33 -5.98 G05 2302 000n -10 6 16 5 1.0 2.0 -10.36 -9.66 G05 2303 000n -8 8 16 7 1.0 4.09 -8.66 -7.97 G05 2304 000n -10 10 16 9 1.0 4.86 -10.66 -9.96 G05 2305 000n -16 10 16 9 1.5 3.1 -17.39 -16.34 G05 2306 000n -30 12.7 16 11.5 1.5 2.9 -31.00 -29.90 G05 2307 000n -50 12.7 16 11.5 1.5 2.3 -51.38 -50.20 G05 2308 000n -100 12.7 16 11.5 1.5 1.9 -100.09 -98.73 G05 2309 000n -200 12.7 16 11.5 1.5 1.7 -200.15 -198.41 G05 2310 000n -500 12.7 16 11.5 1.5 1.6 -504.88 -502.00 G05 2311 000n -1000 12.7 16 11.5 1.5 1.5 -1013.60 -1009.00 G05 2312 000Í -40 22.4 25 21.4 1.5 4.8 -41.30 -40.16 G06 3070 000Í -50 22.4 25 21.4 1.5 4.0 -51.38 -50.20 G06 3071 000Í -100 22.4 25 21.4 1.5 2.7 -102.25 -100.88 G06 3072 000Í -150 22.4 25 21.4 1.5 2.3 -152.50 -150.99 G06 3073 000Í -50 25.4 30 24 1.5 4.8 -51.38 -50.20 G06 3871 000Í -100 25.4 30 24 1.5 3.1 -100.09 -98.73 G06 3872 000Í -200 25.4 30 24 1.5 2.2 -203.03 -201.30 G06 3873 000Í -500 25.4 30 24 1.5 1.8 -504.86 -502.00 G06 3874 000Í -1000 25.4 30 24 1.5 1.7 -1013.60 -1009.00 G06 3875 000Í In mount fitting directly to Microbench,n In mount fitting directly to Nanobench,please look on page 239 for mount dimensions.364US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Plano-concave lenses, mounted (fused silica)<strong>Singlets</strong>• Mounted lenses fit to Microbench Í orNanobench nffocal length (object side)ffocal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertex (h=dr-dm)F, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)6 3x0.063 -0.09 ±0.1510-12.7 3x0.1 -0.11 ±0.222.4 3x0.16 -0.13 ±0.225.4 5x0.1 -0.13 ±0.2Centering accuracy: all 4‘dm Tolerance(mm)Plano-concave lenses, mounted (fabricated from fused silica)f' (mm)Optics-Ø(mm)Outer ØD(mm)Clear Ø(mm)dm (mm) dr (mm) s' 248nm(mm)f' 248nm(mm)Order-Non -10 6 16 5 1.0 2.0 -10.52 -9.85 G05 2313 000n -16 10 16 9 1.0 2.7 -16.74 -16.08 G05 2314 000n -20 12.7 16 11.5 4.0 6.0 -22.32 -19.66 G05 2315 000n -50 12.7 16 11.5 5.3 6.0 -53.62 -50.10 G05 2316 000n -100 12.7 16 11.5 5.6 6.0 -102.27 -98.56 G05 2317 000n -200 12.7 16 11.5 5.8 6.0 -200.48 -196.64 G05 2318 000n -300 12.7 16 11.5 5.9 6.0 -298.12 -294.21 G05 2319 000n -500 12.7 16 11.5 5.9 6.0 -497.85 -493.93 G05 2320 000n -700 12.7 16 11.5 5.9 6.0 -691.63 -687.72 G05 2321 000n -1000 12.7 16 11.5 6.0 6.0 -989.51 -985.53 G05 2322 000n -1400 12.7 16 11.5 6.0 6.0 -1376.17 -1372.20 G05 2323 000n -2000 12.7 16 11.5 6.0 6.0 -1970.35 -1966.38 G05 2324 000n -3000 12.7 16 11.5 6.0 6.0 -2946.07 -2942.09 G05 2325 000n -4000 12.7 16 11.5 6.0 6.0 -3927.49 -3923.51 G05 2326 000n -6000 12.7 16 11.5 6.0 6.0 -5916.68 -5912.70 G05 2327 000n -10000 12.7 16 11.5 6.0 6.0 -10440.00 -10439.10 G05 2328 000n -24000 12.7 16 11.5 6.0 6.0 -23880.00 -23879.68 G05 2329 000Í -40 22.4 25 21.4 1.5 4.9 -40.51 -39.52 G06 3352 000Í -50 22.4 25 21.4 1.5 4.1 -51.10 -50.11 G06 3353 000Í -100 22.4 25 21.4 1.5 2.8 -100.26 -99.27 G06 3354 000Í -150 22.4 25 21.4 1.5 2.3 -149.51 -148.52 G06 3355 000Í -500 25.4 30 24 5.7 6.0 -497.85 -493.93 G06 3867 000Í -700 25.4 30 24 5.8 6.0 -691.63 -687.72 G06 3868 000Í -1000 25.4 30 24 5.8 6.0 -989.51 -985.53 G06 3869 000Í -2000 25.4 30 24 5.9 6.0 -1970.35 -1966.38 G06 3870 000Í -4000 25.4 30 24 6.0 6.0 -3927.49 -3923.51 G06 3876 000Í -6000 25.4 30 24 6.0 6.0 -5916.68 -5912.70 G06 3877 000Í -10000 25.4 30 24 6.0 6.0 -10440.00 -10439.10 G06 3878 000Í -24000 25.4 30 24 6.0 6.0 -23880.00 -23879.68 G06 3879 000Í In mount fitting directly to Microbench,n In mount fitting directly to Nanobench,please look on page 239 for mount dimensions.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420365
Symmetric-concave lenses, unmounted (N-BK7)• Surfaces uncoated• Tolerances: Focal length f' : ± 2 %,Image distance s' : ± 2 %ffocal length (object side)f' focal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertexh' sagittal height secondary vertexF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)10 3x0.16 -0.12 ±0.1512.7 3x0.16 -0.12 ±0.122.4-25.4 3x0.25 -0.15 ±0.240 5x0.25 -0.16 ±0.2Centering accuracy: all 10‘dm Tolerance(mm)Symmetric-concave lenses, unmounted (N-BK7)f' (mm) Ø (mm) dm(mm) dr (mm) h,h'(mm) s, s' 588nm(mm) f' 546nm(mm) Order-No-10 10 1.0 3.5 1.24 -10.48 -10.12 G31 3210 000-20 12.7 1.5 3.5 0.98 -20.55 -19.98 G31 3373 000-50 12.7 1.5 2.3 0.39 -50.88 -50.20 G31 3374 000-100 12.7 1.5 1.9 0.19 -101.30 -100.40 G31 3375 000-200 12.7 1.5 1.7 0.10 -203.30 -202.00 G31 3376 000-20 22.4 1.5 7.5 3.27 -20.40 -19.84 G31 3205 000-30 22.4 1.5 5.6 2.07 -30.62 -30.02 G31 3206 000-40 22.4 1.5 4.5 1.53 -40.75 -40.11 G31 3214 000-50 22.4 1.5 3.9 1.21 -50.87 -50.20 G31 3215 000-100 22.4 1.5 2.7 0.60 -101.26 -100.40 G31 3216 000-150 22.4 1.5 2.3 0.40 -151.39 -150.34 G31 3217 000-30 25.4 1.5 6.9 2.70 -30.40 -29.80 G31 3336 000-50 25.4 1.5 4.6 1.56 -50.88 -50.20 G31 3337 000-100 25.4 1.5 3.1 0.78 -101.30 -100.40 G31 3338 000-200 25.4 1.5 2.3 0.39 -203.30 -202.00 G31 3339 000-50 40 2.0 9.9 3.97 -50.96 -50.11 G31 3240 000-100 40 2.0 5.9 1.93 -101.34 -100.31 G31 3241 000-200 40 2.0 3.9 0.95 -203.34 -201.93 G31 3243 000-500 40 2.0 2.8 0.38 -506.62 -504.08 G31 3249 000High quality<strong>Qioptiq</strong> uses glass from established manufacturers in the productionof precision optics components. This ensures the consistent highquality of our lenses, achromatic lenses and plano-optics.366US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Symmetric-concave lenses, mounted (N-BK7)<strong>Singlets</strong>• Mounted lenses fit to Microbench Í orNanobench n• Surfaces uncoatedffocal length (object side)f' focal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertexh' sagittal height secondary vertexF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Diameter(mm)Surface qualityregarding ISO 10110Ø Tolerance(mm)10 3x0.16 -0.12 ±0.1512.7 3x0.16 -0.12 ±0.122.4-25.4 3x0.25 -0.15 ±0.240 5x0.25 -0.16 ±0.2Centering accuracy: all 10‘dm Tolerance(mm)A closer lookAll the relevant specifications of the lenses, such asmaterials, radii and center thicknesses, are includedin the database of the <strong>LINOS</strong> WinLens optical designsoftware. A freeware version of this program isavailable for download at www.winlens.de.Symmetric-concave lenses, mounted (N-BK7)Mount f' (mm) Optics-Ø(mm)Outer-ØD(mm)Clear Ø(mm)dm(mm)dr(mm)h, h'(mm)s, s' 588 nm(mm)f' 546nm(mm)Order-Non -10 10 16 9 1.0 3.5 1.24 -10.48 -10.12 G05 2401 000n -20 12.7 16 11.5 1.5 3.5 0.98 -20.55 -19.98 G05 2402 000n -50 12.7 16 11.5 1.5 2.3 0.39 -50.88 -50.20 G05 2403 000n -100 12.7 16 11.5 1.5 1.9 0.19 -101.30 -100.40 G05 2404 000n -200 12.7 16 11.5 1.5 1.7 0.10 -203.30 -202.00 G05 2405 000Í -20 22.4 25 1 ) 21.4 1.5 7.2 3.27 -20.40 -19.84 G06 3058 000Í -30 22.4 25 21.4 1.5 5.6 2.07 -30.62 -30.02 G06 3059 000Í -40 22.4 25 21.4 1.5 4.5 1.53 -40.75 -40.11 G06 3060 000Í -50 22.4 25 21.4 1.5 3.9 1.21 -50.87 -50.20 G06 3061 000Í -100 22.4 25 21.4 1.5 2.7 0.60 -101.26 -100.40 G06 3062 000Í -150 22.4 25 21.4 1.5 2.3 0.40 -151.39 -150.34 G06 3063 000Í -30 25.4 30 24 1.5 6.9 2.70 -30.40 -29.80 G06 3891 000Í -50 25.4 30 24 1.5 4.6 1.56 -50.88 -50.20 G06 3892 000Í -100 25.4 30 24 1.5 3.1 0.78 -101.30 -100.40 G06 3893 000Í -200 25.4 30 24 1.5 2.3 0.39 -203.30 -202.00 G06 3894 000Í In mount fitting directly to Microbench, n In mount fitting directly to Nanobench, please look on page 239 for mount dimensions.1 ) Also available in longer mount.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420367
Symmetric-concave lenses (fused silica)• Suitable for DUV-applications• Mounted or unmounted• Mounted lenses fit to Microbench Í• Surfaces uncoated• Centering accuracy 4'• Surface quality 3 x 0.16• ØTole rance -0.13 mmffocal length (object side)f' focal length (image side)sobject distances' image distanceØ lens diameterdm center thicknessdr edge thicknessh primary vertexh' sagittal height secondary vertexF, F' focal pointsH, H' principal pointsTolerances:Focal length f': ±2%Image distance s': ±2%Symmetric-concave lenses, unmounted (fused silica)f' (mm) Ø (mm) dm (mm) dr (mm) h, h' (mm) s, s' 248 nm(mm) f' 248nm(mm) Order-No-20 22.4 1.5 8.1 3.3 -20.43 -19.94 G31 3330 000-30 22.4 1.5 5.7 2.1 -30.02 -29.53 G31 3331 000-40 22.4 1.5 4.7 1.6 -39.95 -39.46 G31 3332 000-50 22.4 1.5 4.1 1.3 -49.88 -49.38 G31 3333 000-100 22.4 1.5 2.7 0.6 -99.99 -99.49 G31 3334 000-150 22.4 1.5 2.3 0.4 -147.35 -146.85 G31 3335 000Q-enabled<strong>Qioptiq</strong> is a leading manufacturer of Head-Up Displays for more than30 years.Together with our defense and commercial business partners in Europewe develop and produce outstanding Head-Up Display’s for the civiland defense avionics industry. Head-Up Displays are a competitivetechnology to support the pilot’s work during the flight. <strong>The</strong> <strong>LINOS</strong>market segment group “Display Technology” is specialized on customerspecific development and production of Head-Up Displays includingsophisticated combiner components.Sophisticated self-developed assembly and precise mounting technologiesas well as special test systems are used for development and productionof Head-Up Displays.368US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong><strong>Singlets</strong>Mounted symmetric-concave lensesSymmetric-concave lenses, mounted (fused silica)Mount f' (mm) Optics-Ø(mm)Outer-ØD(mm)Clear Ø(mm)dm(mm)dr(mm)h, h'(mm)s, s' 248nm(mm)f' 248nm(mm)Order-NoÍ -20 22.4 25 1 ) 21.4 1.5 8.1 3.3 -20.43 -19.94 G06 3344 000Í -30 22.4 25 21.4 1.5 5.7 2.1 -30.02 -29.53 G06 3345 000Í -40 22.4 25 21.4 1.5 4.7 1.6 -39.95 -39.46 G06 3346 000Í -50 22.4 25 21.4 1.5 4.1 1.3 -49.88 -49.38 G06 3347 000Í -100 22.4 25 21.4 1.5 2.7 0.6 -99.99 -99.49 G06 3348 000Í -150 22.4 25 21.4 1.5 2.3 0.4 -147.35 -146.85 G06 3349 000Í In mount fitting directly to Microbench, please look on page 239 for mount dimensions.1 ) Also available in longer mount.Q-enabled<strong>Qioptiq</strong> has been a leading manufacturer of optics for infrared detectionand imaging systems for decades. Together with our defense businesspartners in Europe we develop and manufacture infrared detection andimaging systems for defense applications.Infrared detection and imaging systems are a core technology to detectand track any kind of thermal targets or to detect threats related withany kind of thermal light emission, but has also commercial applicationslike lenses for thermal inspection systems. <strong>Qioptiq</strong> has many years of experiencein this field, ranging from the optical and mechanical system designup to manufacturing and assembly of highly complex opto-mechanicalsystems.Sophisticated self-developed assembly and precise mounting technologiesas well as special test systems are used for development and productionof IR imaging systems and seeker head optics.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420369
Plano-convex cylindrical lenses (N-BK7)• Mounted or unmounted• In mount fitting to Microbench Í• Surfaces uncoated• Tolerances: Focal length f' : ± 5 %,Image distance s' : ± 5 %Plano-convex cylindrical lenses, unmounted (N-BK7)f' (mm) Ø (mm) L (mm) b (mm) dm(mm) dmTolerance(mm) dr(mm) ØTole rance1.2 1) 10 1.6 1.6 ±0.15 12.5 5 2.4 ±0.2 -0.1110 18 9.5 4.0 ±0.2 -0.1140 18 15 2.7 ±0.2 1.3 -0.1140 60 15 2.7 ±0.2 1.340 130 15 2.7 ±0.2 1.360 60 20 3.0 ±0.2 1.460 130 20 3.0 ±0.2 1.480 31.5 30 4.0 ±0.2 1.2 -0.1680 60 30 4.0 ±0.2 1.280 130 30 4.0 ±0.2 1.2100 60 50 8.0 ±0.3 1.6150 60 50 6.0 ±0.3 1.9200 31.5 5.0 ±0.3 3.8 -0.16200 60 50 5.0 ±0.3 3.8250 60 50 4.5 ±0.3 2.1300 60 50 4.0 ±0.3 2.01) Rod lensPlano-convex cylindrical lenses, mounted (N-BK7)Mount f' (mm) Ø (mm) L (mm) b (mm) Mount, Outer-ØD (mm) dm (mm) dmTolerance(mm)Í 1.2 1) 10 1.6 25, clear aperture Ø1.4 1.6 ±0.1Í 5 12.5 5 25, clear aperture Ø11.5x5 2.4 ±0.2Í 10 18 9.5 25, clear aperture Ø17x9.5 4.0 ±0.2Í 40 18 15 25, clear aperture Ø17x15 2.7 ±0.2Í 80 31.5 30 35, clear aperture Ø30 4.0 ±0.2Í 200 31.5 35, clear aperture Ø30 5.0 ±0.31) Rod lens, Í In mount fitting directly to Microbench, please look on page 239 for mount dimensions.370US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Rectangular Type<strong>Singlets</strong>ffocal length (object side)f' focal length (image side)s' image distancedm center thicknessdr edge thicknessh primary vertexF, F' focal pointsH, H' principal pointsLLengthb widthØ lens diameterTolerances:Focal length f': ±5%Image distance s': ±5%Circular TypeLTolerance(mm) b Tolerance(mm) h (mm) s' 588nm(mm) f' 546nm(mm) Order-No-0.09 ±0.20 0.8 0.37 1.17 G31 8303 000±0.20 2.4 3.25 4.82 G31 8301 000±0.20 4.0 7.04 9.64 G31 8302 000-0.11 1.4 38.53 40.16 G31 8314 000-0.19 -0.11 1.4 38.53 40.16 G31 8311 000-0.25 -0.11 1.4 38.53 40.16 G31 8312 000-0.19 -0.13 1.6 59.65 61.40 G31 8321 000-0.25 -0.13 1.6 59.65 61.40 G31 8322 000-0.13 2.8 78.38 80.71 G31 8334 000-0.19 -0.13 2.8 78.38 80.71 G31 8331 000-0.25 -0.13 2.8 78.38 80.71 G31 8332 000-0.19 -0.50 6.4 95.99 100.88 G31 8351 000-0.19 -0.50 4.1 147.56 150.94 G31 8352 0001.2 198.76 201.28 G31 8335 000-0.19 -0.50 1.2 198.76 201.28 G31 8353 000-0.19 -0.50 2.4 247.78 249.79 G31 8354 000-0.19 -0.50 2.0 299.69 301.16 G31 8355 000Q-enabled<strong>Qioptiq</strong> has been a leading manufacturer of optics for surveillance, tracking andimaging systems form UV to infrared spectral range since decades. Together withour defense business partners in Europe, we develop and manufacture surveillanceand tracking systems for defense applications. Sophisticated surveillance and imagingsystems are a core technology to observe and track any kind of targets or todetect threats related with any kind of light emission. Surveillance and tracking systemscan have also commercial applications like inspection equipment or securitysystems.<strong>Qioptiq</strong> has many years of experience in this field, ranging from the optical and mechanicalsystem design up to manufacturing and assembly of highly complex optomechanicalmodules. Sophisticated self-developed assembly and precise mountingtechnologies as well as special test equipment are used for development and productionof optics for surveillance, target tracking and imaging systems optics.dr (mm) ØTolerance LTole rance(mm) b Tolerance(mm) h (mm) s' 588nm(mm) f' 546nm(mm) Order-No-0.09 ±0.20 0.8 0.37 1.17 G06 3425 000-0.11 ±0.20 2.4 3.25 4.82 G06 3420 000-0.11 ±0.20 4.0 7.04 9.64 G06 3421 0001.3 -0.11 -0.11 1.4 38.53 40.16 G06 3422 0001.2 -0.16 -0.13 2.8 78.38 80.71 G06 3426 0003.8 -0.16 1.2 198.76 201.28 G06 3427 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420371
Plano-convex cylindrical lenses (fused silica)• Mounted or unmounted• In mount fitting to Microbench Í• Surfaces uncoated• Tolerances: Focal length f' : ± 5 %,Image distance s' : ± 5 %Plano-convex cylindrical lenses, unmounted (fused silica)f' (mm) Ø (mm) L (mm) b (mm) dm (mm) dmTolerance(mm) dr (mm) ØTolerance(mm)5 12.5 5 2.4 ±0.2 -0.1110 18 10 4.7 ±0.2 -0.1163 22.4 20 3.0 ±0.2 -0.1141 60 15 2.7 ±0.2 1.363 60 20 3.0 ±0.2 1.483 60 30 4.0 ±0.2 1.2104 60 30 8.0 ±0.2 5.8156 60 30 6.0 ±0.2 4.6208 60 30 5.0 ±0.2 3.9310 60 30 4.0 ±0.2 3.3104 60 50 8.0 ±0.2 1.6156 60 50 6.0 ±0.2 1.9208 60 50 5.0 ±0.2 2.0310 60 50 4.0 ±0.2 2.0Plano-convex cylindrical lenses, mounted (fused silica)Mount f' (mm) Ø (mm) L (mm) b (mm) Mount, Outer-Ø D (mm) dm (mm) dmTolerance(mm)Í 5 12.5 - 5 30, clear aperture Ø11.5x5 2.4 ±0.2Í 10 18 - 10 30, clear aperture Ø17x9.5 4.7 ±0.2Í 63 22.4 - 20 30, clear aperture Ø21.4x20 3.0 ±0.2Í In mount fitting directly to Microbench, please look on page 239 for mount dimensions.372US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Rectangular Type<strong>Singlets</strong>ffocal length (object side)f' focal length (image side)s' image distancedm center thicknessdr edge thicknessh primary vertexF, F' focal pointsH, H' principal pointsLLengthb widthØ lens diameterTolerances:Focal length f': ±5%Image distance s': ±5%Circular TypeLTole rance(mm) bTolerance(mm) hTolerance(mm) s' 588nm(mm) f' 546nm(mm) Order-No±0.10 2.4 3.37 5.43 G31 8806 000±0.10 4.7 6.80 10.87 G31 8807 000-0.13 1.6 61.26 69.22 G31 8824 000-0.19 -0.11 1.4 39.58 45.28 G31 8813 000-0.19 -0.13 1.6 61.26 69.22 G31 8823 000-0.19 -0.13 2.8 80.49 90.99 G31 8833 000-0.19 -0.13 2.2 98.61 113.73 G31 8847 000-0.19 -0.13 1.4 151.52 170.16 G31 8848 000-0.19 -0.13 1.1 204.06 226.91 G31 8849 000-0.19 -0.13 0.7 307.65 339.51 G31 8850 000-0.19 -0.16 6.4 98.61 113.73 G31 8856 000-0.19 -0.16 4.1 151.52 170.16 G31 8857 000-0.19 -0.13 3.0 204.06 226.91 G31 8858 000-0.19 -0.16 2.0 307.65 339.51 G31 8859 000Q-enabled<strong>Qioptiq</strong> develops and constructs beam controlsystems for refractive eye surgery aswell as illumination, measuring and imagingunits for diagnostic appliances. <strong>LINOS</strong>‘high competence in the field of optics contributessignificantly to the generation ofimproved retina and cornea images. <strong>Qioptiq</strong>offers solutions for:• Retinal Diagnosis• Ophthalmic measurements• Ophthalmic surgery.Our specialists will be pleased to provideyou with more details.dr (mm)ØTole rance(mm)LTole rance(mm)bTole rance(mm)hTole rance(mm)s' 588nm(mm) f' 546nm(mm) Order-No- -0.11 - ±0.10 2.4 3.37 5.43 G06 3358 000- -0.11 - ±0.10 4.7 6.80 10.87 G06 3359 000- -0.11 - -0.13 1.6 61.26 69.22 G06 3360 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420373
Plano-concave cylindrical lenses (N-BK7)• Unmounted• Surfaces uncoated• L = 60 mm• b = 50 mm• dm Tolerance = ±2.0 mm• L Tolerance = -0.19 mm• b Tolerance = -0.50 mmRectangular Typeffocal length (object side)f' focal length (image side)s' image distancedm center thicknessdr edge thicknessh primary vertexF, F' focal pointsH, H' principal pointsLLengthb widthØ lens diameterTolerances:Focal length f': ±5%Image distance s': ±5%Selection guideOur lenses are also available with the following standard, economicallypriced anti-reflective coatings:• ARB 2 UV (250-400 nm), order code -522• ARB 2 VIS (450-700 nm), order code -322• ARB 2 NIR (725-1050 nm), order code -525• ARHS 1064 (Nd:YAG center wavelength at 1064 nm), order code -329When placing an order or requesting a quote, simply replace the"000" in the order number with the order code for the desired coating.For more information please look at the beginning of this chapterrespectively chapter "Thin Film Coatings."Plano-concave cylindrical lenses fabricated from N-BK7f' (mm) dm(mm) dr(mm) h (mm) s' 588 nm(mm) f' 546 nm(mm) Order-No-90 4.5 11.7 7.2 -94.10 -90.80 G31 6301 000-145 4.0 8.2 4.2 -150.07 -146.90 G31 6302 000374US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Aspheric Collimator Lenses<strong>Singlets</strong>Aspheric lenses provide simple, singleelementsolutions for laser collimation.Aspheries can eliminate sphericalaberrations and improve focusing andcollimating accuracy.Typical applications are fiber coupling,laser diodes, optical data storage, andbarcode scanners.• Molded Glass Aspheric Lenses• Aspheric surface reduces sphericalaberration• Numerical apertures from 0.3 to 0.6• Anti-reflective coating• Fewer optical components thanspherical lens systems• Kodak equivalent aspheric lenses• RoHS compliantAR-coating 350 nm - 600 nmAR-coating 600 nm - 1050 nmAspheric Collimator LensesItemTiltle Type Focallength(mm)Backfocallength(mm)NAOuterdiameter(mm)Clearaperture(mm)Centerthickness(mm)ARCoatingWindowthickness(mm)Order-NoAsphericCollimatorLens A110 6.24 3.39 0.42 7.20 5.00 5.36 600-1050nm 0.275 G31 7001 000AsphericCollimatorLens A230 4.51 2.91 0.54 6.33 4.95 2.94 600-1050nm 0.25 G31 7002 000AsphericCollimatorLens A240 8.00 5.92 0.50 9.94 8.00 3.69 600-1050nm 0.25 G31 7003 000AsphericCollimatorLens A397 11.00 9.64 0.30 7.20 6.59 2.2 600-1050nm 0.275 G31 7004 000AsphericCollimatorLens A671 4.02 2.39 0.60 6.33 4.85 2.995 350-600nm 0.25 G31 7005 000High qualityTake advantage of more than 130 years of experience in the manufactureof precision optics and precision mechanical components and systems.Manufacturing in Germany, Göttingen (about 1910)Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420375
Aspheric Condenser Lenses• Plano-convex lenses with minimalspherical aberration• Very high aperture ratios• Primarily for use in illuminationsystems• Mounted or unmounted• In mount fitting to Microbench Í• Fabricated from crown glass• Surfaces uncoated• Special coatings for AsphericCondenserLenses are available onrequest.ffocal length (objekt side)f' focal length (image side)Ø lens diametersobject distance (objektseitig)s' image distance (bildseitig)dm center thicknessdr edge thicknessF, F' focal pointsH, H' primary pointsA closer lookAll the relevant specifications ofthe lenses, such as materials, radiiand center thicknesses, are includedin the database of the <strong>LINOS</strong>WinLens optical design software.A freeware version of this programis available for download atwww.winlens.de.Aspheric condenser lenses, unmounted (crown glass)f' (mm) Ø (mm) dm (mm) dr (mm) Ø-Tolerance (mm) s' 588 nm(mm) f' 546 nm(mm) f' 588 nm(mm) Order-No15 18 7.4 2.0 -0.13 10.7 15.7 15.8 G31 7703 00018 22.4 10.2 2.5 -0.13 11.8 18.7 18.8 G31 7704 00027 31.5 12.3 1.8 -0.16 19.5 27.8 17.9 G31 7707 00040 50 19.4 2.3 -0.30 *) 28.6 41.8 42.0 G31 7708 000*) Uncentered pressed edges376US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong><strong>Singlets</strong>Mounted Aspheric Condenser LensesAspheric condenser lenses, mounted (crown glass)Mountf'(mm)Ø(mm)Mount, Outer-Ø(mm)dm(mm)dr(mm)Ø-Tolerance(mm)s' 588(mm)f' 546(mm)f' 588(mm)Order-NoÍ 15 18 25 mm, clear Ø 17 mm 7.4 2.0 -0.13 10.7 15.7 15.8 G06 3095 000Í 18 22.4 25 mm, clear Ø 21.4 mm 10.2 2.5 -0.13 11.8 18.7 18.8 G06 3097 000Í 27 31.5 35 mm, clear Ø 30 mm 12.3 1.8 -0.16 19.5 27.8 17.9 G06 3098 000Í In mount fitting directly to Microbench, please look on page 239 for mount dimensions.Q-Enabled<strong>Qioptiq</strong> is a world-leading manufacturer for optical systems for X-RayImaging. <strong>The</strong>se range from numerous standard optics and customizedlenses up to complete radiology cameras. Angiographic, surgical or lithotripsyapplications require the highest image quality and a high dynamicrange.<strong>The</strong>se demands are realized via high-aperture and fully motorized units.Swing-in filters, automatic stop adjustment, integrated incident light readingand modular focus have been design standards at <strong>Qioptiq</strong> for a longtime.Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420377
Microlens Arrays, Introduction••Microlenses for fiber coupling andoptical switching••Microlenses for collimation of laserdiodes and VCSELs••Microlenses for imaging systems andsensors••Beam homogenizers for lasers andillumination systems••Array optics featuring high precision••For the best imaging characteristics(aspherical lenses)••Simplified alignment and assembly(planar substrates)Refractive microlenses are the No. 1choice for all applications in whichminiaturization of an optical system andreduction of alignment and packagingcosts play a major role. Microlensestypically have a lens diameter of 10 µmto 2 mm and are produced in the form ofarrays (fields) on planar substrates(wafers).Refractive microlenses are manufacturedfrom synthetic fused silica or silicon in acleanroom environment using the highlysophisticated processes of the semiconductorindustry (photolithography,plasma etching). <strong>The</strong>se processes allowprecise production of complex arrayoptics and excellent optical quality of themicrolenses.Specifications of microlensesRefractive microlenses are characterizedby the lens diameter D and the focallength ƒ.SAGradius ofcurvaturelensdiametersubstrate thicknessfocal lengthobject distanceimage distanceAdditional parameters are the sag at thelens vertex SAG, the refractive index n 1,the radius of curvature ROC, the conicconstant k and the numerical apertureNA.378US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong><strong>Singlets</strong>For spherical lens profiles, the conicconstant k is 0; for parabolic profiles, k =-1 and for hyperbolic profiles,k = -(n 1) 2 .High-grade microlenses are usually madeof synthetic fused silica (refractive indexn 589nm= 1.458) or silicon (n 1.5µm= 3.478).Fused silica microlenses can be used inthe full wavelength spectra from DUV toIR (see transmission curve); siliconmicrolenses are designed for the infraredwavelength range (λ: 1.2 µm to 15 µm).2ApplicationsTypical tasks of microlenses in an opticalsystem are collimation and focusing oflight beams, or imaging an object in afocal plane. In optical communicationengineering, a microlens array is used toimage the light of a fiber bundle onto anarray of micromirrors. A second microlensarray couples the deflected light of theindividual data channels back into a fiberarray. <strong>The</strong> high precision of the lateralarray dimensions (better than ±0.25 µm)allows a very accurate fiber-to-lenspositioning of many channels in onealignment step. <strong>The</strong> high-class lensquality and the exceptional lens-to-lensuniformity ensure optimal couplingefficiencies for all optical channels inparallel. Aspherical lens profiles are usedto minimize the spherical aberrations fordifferent optical configurations (verticalincident light).a) Lens on object sideworking distanceb) Lens on image sideworking distance<strong>The</strong> small pupil diameter of microlensesrequires careful design of optimalsystems, taking into considerationdiffraction effects, light scatter andmechanical tolerances. For a detailedanalysis of your requirements, pleasecontact our sales department.Fused Silica Microlens Arrays100100Transmission (%)806040Transmission (%)80604020200150 170 190 210 230 250 250 750 1250 1750 2250 2750 3250 3750Wavelength (nm)Wavelength (nm)0Typical transmission of Schott Lithosil Q1 including Fresnel reflection losses (10 mm thickness)working distanceGermany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420379
Microlens Arrays, Fused Silica, Type FC-Q-100 Square• Applications: Fiberoptics, lasers,sensors• Substrate: Fused silica• Substrate thickness: 1.2 mm• Array type: square• Lens spacing (pitch): 100 μm• Lateral precision: ± 0.25 μm• Lens type: refractive, plano-convex• Lens diameter: 95 μm• Refractive index: 1.561 at 248 nm,1.457 at 633 nm, 1.444 at 1550 nm• Microlens arrays with otherconfigurations,array sizes,antireflectivecoating, alignmentmarks anddiaphragms, etc., areavailable onrequest.• Array mounts for the <strong>LINOS</strong>Microbench or Nanobench can befound on page 383.Microlens Arrays, Fused Silica, Type FC-Q-100 SquareType ROC(µm) Wavele ngth NumericalapertureConicconstantWorking distance(object side)(µm)Arraysize(mm)Order-NoFC-Q-100 120 UV-IR 0.19 0 240 5x5 G39 9901 000FC-Q-100 140 UV-IR 0.17 0 280 10x10 G39 9905 000Microlens-Arrays, Fused silica, Type FC-Q-250 Hex• Applications: Fiber optics, lasers,sensors• Angle of incidence: on-Axis• Substrate material: Fused silica• Substrate thickness: 1.2 mm• Array type: Hexagonal, densely packed• Lens spacing (Pitch): 150 μm• Lateral precision: ± 0.25 ±µm• Lens type: refractive, plano-convex• Lens diameter: 240 μm• Refractive index: 1.561 at 248 nm,1.457 at 633 nm, 1.444 at 1550 nm• Array mounts for the <strong>LINOS</strong>Microbench or Nanobench can befound on page 383.FC-Q-250 Hex, fused silicaItemTitleROC(µm)Wavele ngthNumericalapertureConicconstantWorking distance /object side)(µm)Arraysize(mm)Order-NoFC-Q-250 350 UV-IR 0.17 -1 700 5x5 G39 9910 000FC-Q-250 380 UV-IR 0.15 -1 800 10x10 G39 9915 000380US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Microlens Arrays, Fused Silica, for Fiber optics<strong>Singlets</strong>• Applications: Fiber optics, lasers,sensors• Substrate material: Fused silica• Substrate Thickness: 0.9 mm• Array type: linear, 1 x 48 lenses• Lens spacing (pitch): 250 μm• Lateral precision: ± 0.25 μm• Lens Type: refractive, plano-convex• Lens diameter: 240 μm• Coating, both sides: 1250 to 1650 nm• Refractive index: 1.561 at 248 nm,1.457 at 633 nm, 1.444 at 1550 nmFC-Q-250, 1x48, ROC 330 µm, fused silicaType ROC (µm) Numerical aperture conic constant Working distance (µm) Arraysize (mm) Order-NoFC-Q-250 330 0.17 0 700 14x4 G39 9920 000High-Power Beam Homogenizers, CC-Q-300• Substrate material: Fused silica• Substrate thickness: 1.2 mm• Array Type: Crossed cylinder lenses• Lens distance (pitch): 300 μm• Lateral precision: ± 0.25 μm• Lens type: refractive, plano-convex,cylindrical• Lens profile: Paraboloid• Far-field: Flat-top• Microlens arrays with otherconfigurations,array sizes,antireflectivecoating, alignmentmarks anddiaphragms, etc., areavailable onrequest.• Please look at section ”OpticalSystems” regarding complete laserbeam homogenizer systems.• Array mounts for the <strong>LINOS</strong>Microbench or Nanobench can befound on page 383.CC-Q-300, fused silicaType Divergence ROC (mm) Numerical aperture Conic constant Arraysize (mm) Wavelength Order-NoCC-Q-300, 0.5° ±0.5° 6,80 0.01 -1 5x10 DUV-IR G39 9930 000CC-Q-300, 0.5° ±0.5° 6,80 0.01 -1 10x10 DUV-IR G39 9935 000CC-Q-300, 1° ±1° 3,60 0.02 -1 5x10 DUV-IR G39 9931 000CC-Q-300, 1° ±1° 3,60 0.02 -1 10x10 DUV-IR G39 9936 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420381
High-Power Beam Homogenizers, CC-Q-300/500S• Substrate material: Fused silica• Divergence angle: ± 0.5°, ± 1°• Array Type: Quadratic microlenses• Lens distance (pitch): 300 μm, 500 μm• Lateral precision: ± 0.25 μm• Lens type: refractive, plano-convex,square• Lens profile: Paraboloid• Far-field: Flat-top• Microlens arrays with otherconfigurations,array sizes,antireflectivecoating, alignmentmarks anddiaphragms, etc., areavailable onrequest.• Subsequent you find array mounts forthe <strong>LINOS</strong> Microbench or Nanobench.• Please look at chapter ”OpticalSystems” regarding complete laserbeam homogenizer systems.High-Power Strahl Homogenizers, CC-Q-300/500SType Divergence ROC (mm) Arraysize (mm) Wavelength Order-NoCC-Q-300S, 0.5° ±0.5° 8,45 10x10 DUV-IR G39 9960 000CC-Q-300S, 1° ±1° 4,00 5x10 DUV-IR G39 9961 000CC-Q-300S, 1° ±1° 4,00 10x10 DUV-IR G39 9962 000CC-Q-500S, 0.5° ±0.5° 14,88 10x10 DUV-IR G39 9963 000CC-Q-500S, 1° ±1° 7,10 10x10 DUV-IR G39 9964 000382US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Microbench mounts for square microlens arrays<strong>Singlets</strong>For all microlens arrays and beamhomogenizers with dimensions of5x5mm and 10x10 mm• <strong>The</strong> microlens array has to be fixedwith glue• For use with <strong>LINOS</strong> microbench systemthe lens mount G06 3651 000 isrequired. Thiscombined mount fitsany Microbenchmounting plate withdiameter 25 mm(e. g. G06 1010 000,ref. chapterMicrobench)Mounts for square microlens arraysItem TitleOrder-NoArray mount 5x5 G06 5220 017Array mount 10x10 G06 5220 018Nanobench mounts for microlens arraysFor all microlens arrays and beamhomogenizers with dimensions of5x5 mm, 5x10 mm and 10x10 mm• <strong>The</strong> microlens array has to be fixedwith glueNanobench mounts for microlens arraysItem Title Dimension A Dimension B Order-NoArray mount 5x5 5 mm 5 mm G05 0460 000Array mount 5x10 5 mm 10 mm G05 0461 000Array mount 10x10 10 mm 10 mm G05 0462 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420383
Varioptic Autofocus Liquid LensOperating mode of liquid lenses<strong>The</strong> liquid lenses developed by VARIOP-TIC are based on the phenomenon ofelec tro-wetting. A water drop lies on ametallic substrate, which is covered by athin insulation layer. <strong>The</strong> voltage appliedbetween substrate and water drop variesthe contact angle between water dropand substrate. Liquid lenses fromVARIOPTIC use two liquids, one of whichis used as an insulator, while the otherone is used as conducting layer. Varyingthe applied voltage leads to a change inbend of the border layer between bothliquids. This causes a change in focallength of the lens. VARIOPTIC owns twofundamental, worldwide patents aboutthis technology and is dedicating a largepart of their development capacity to theimprovement and expansion of thesepatents.Characteristics of liquid lenses:••Large range of focal length••Robust – no moving components••Short reaction time••Very good optical quality••Good transmission in the range ofvisible wavelengths••Large range of operating temperature••Very good stability of the optical axis••Low power consumption••Simple, cost-saving designMedical technology<strong>The</strong> big potential of VARIOPTIC withrefer ence to miniaturisation createsmany new opportunities in the area ofimaging. So, liquid lenses are, forinstance, suitable for installation insideendoscopes, confocal microscopes andfor laser focusing. Oph thalmology willalso benefit from this new technology ofliquid lenses.Biometry and identification<strong>The</strong> short reaction time of 2/100 s is anessential benefit for recognising specificfeatures: barcodes or biometriccharacter istics like iris or finger prints.<strong>The</strong> manufacturer:VARIOPTIC is a leading enterprise indevelopment and manufacturing ofelectronically controlled liquid opticallenses for the optical industry. VARIOPTICis, for instance, the first enterprise whichwas granted international patents for asingle-component focusing lens, which isbased on non-mixable liquids. In order toretain and to further develop theirtechnological head start, VARIOPTICinvests increasingly in research anddevelopment.VARIOPTIC has its headquarter in Lyon, inFrance, and was founded in 2002.Field of application:For future mobiles, PDAs, etc.According to the technology used,VARIOPTIC’s optically controlled lensesare also called liquid lenses. Liquid lensesare well-suited for the next generationof mobile devices with camera function:mobiles, PDAs, digicams and many more.<strong>The</strong> VARIOPTIC-technology offers somekey benefits for this type of devices:••Very small size: 8 mm in diameter,thickness of 2 mm••Simple design••Short reaction time < 2/100 s••Low power consumption384US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
<strong>Singlets</strong>Arctic 314<strong>Singlets</strong>Varioptic´s ARCTIC 314 has beenespecially designed to match therequirements of industrial applications.With the advent of high quality imagesensors (high resolution, small pixelpitch), the need for compact, reliableand inexpensive auto-focus solutions isnow emerging.<strong>The</strong> robustness, low power consumptionand fast response time of Varioptic'sARCTIC 314 mean that auto-focuscameras based on this product are aperfect fit for both consumer andbusiness device applications, such aswebcams, barcode readers, medicalequipment, machine vision, etc..<strong>The</strong> ARCTIC 314 series is the perfect fitfor addressing the needs for lowfootprint, 1/3“ camera modules,targeting 3 to 5MP sensors.Arctic 314ItemTitlePupil diameter(mm)Dimensions(mm)FocalrangeWave front error(RMS)(nm)Transmittance@587 nm(%)Order-NoArctic314 2.5 Ø 7.75 x 2.45 100 mm toinfinity < 80 > 97 G39 9526 000Arctic 416 SLResponding to the growing marketdemand for small, reliable andinexpensiveauto-focus solutions, theARCTIC 416Series provides a fast track tothe marketfor OEMs and ODMs lookingfor an easyway to integrate, highperformanceautofocus solutions.<strong>The</strong> ARCTIC 416 Series features inherentaccuracy and unmatched response time.It allows for much simpler auto-focusstrategies that can be applied to obtainsharp, crisp focii in times never reachedbefore, well under 500 ms.• This product is ideally suited forMobile Phone applications, and is theperfect fit for low footprint cameramodules. More generally, it can beused in any 2 to 5 Mega Pixels, ¼"optical system, such as:• - Mobile Phones,• - PDAs,• - Webcams,• - BarCode Readers,• where its small size, large dynamicrange and low wave front distortionwill deliver outstanding performance,even in low light conditions.Arctic 416 SLItemTitlePupil diameter(mm)Dimensions(mm)FocalrangeWave front error(µm)Transmittance@ 587 nm(%)Order-NoArctic416 SL 2.3 Ø 7.75 x 1.6 60 mm toinfinity < 0.5 > 90 G39 9501 000Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420385
Liquid Lens Driver Board 60 LL3Driver Mini-Board, based on DrivIC 60LL3.Liquid Lens Driver Board 60 LL3Item TitleOrder-No• Complete reference design• Available with either PWM or I²Ccontrol interface• See technical datasheet underDownloads at www.linos.com.DrivBoard 60 LL3 PWM G39 9510 000DrivBoard 60 LL3 I 2 C G39 9511 000Power Supply VPS-048This accessory is only available in theevaluation and developers kits.VPS-048 is used to deliver the rightoutput voltage to the lens. It can bedriven automatically (by an applicationrunningon a PC for instance), ormanually (in astand-alone mode)Lens Holder VHD-002This accessory is only available in theevaluation and developer kits.To connect the liquid lens to the powersupply, allowing you to evaluate theliquid lens added to your own optics.Liquid Lens Evaluation Kits<strong>The</strong>se kits are designed to allow a quickintegration of the Liquid Lens into anyapplication. This is achieved by simplyplacing the lens in front of an imagingsystem and manually driving the voltagelevel through the provided power supply,thus manually changing the focus(alternatively, the power supply can alsobe application-driven through a specificprotocol).• <strong>The</strong> Evaluation Kits contain liquidlenses, one lens holder and one powersupply.Liquid Lens Evaluation KitsItem Title Lens Type Lens Quantity Lens Holder Power Supply Order-NoArctic 416 LL EK Arctic 416 5 VHD-002 VPS-048 G39 9524 000Arctic 314 LL EK Arctic 314 5 VHD-002 VPS-048 G39 9531 000Arctic MIX LL EK Arctic 314/416 3/3 VHD-002 VPS-048 G39 9535 000386US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
Developer Kit Arctic Mix LL DKThis kit is intended for integrators andapplication developers willing to developa stand-alone and integrated auto-focussolution. It comes with a complete andflexible set of components to cover mostarchitectures.Arctic Mix LL DK Developer KitItem TitleOrder-NoArctic Mix LL DK PWM G39 9522 000Arctic Mix LL DK I 2 C G39 9534 000Content:• 3x Arctic 314• 3x Arctic 416• 6x flex cables• 6x DrivBoard 60 LL3 PWM• 1x VHD-002• 1x VPS-048or• 3x Arctic 314• 3x Arctic 416• 6x flex cables• 6x DrivBoard 60 LL3 I 2 C• 1x VHD-002• 1x VPS-048Full Developer Kit Arctic Mix Full DKThis kit is intended for integrators andapplication developers willing to developa stand-alone and integrated auto-focussolution. It comes with a complete set ofcomponents to cover most architecturesand offers a range of engineeringdevelopment options. <strong>The</strong> lens can thenbe driven either through a single chip,Varioptic´s DrivIC 60 (for completeintegration), or through a power supply,VPS-048.Content:• 3x Arctic 314• 3x Arctic 416• 6x flex cables• A/F source code• 3x DrivBoard 60 LL3 PWM• 3x DrivBoard 60 LL3 I 2 C• 1x VHD-002• 1x VPS-048Full Developer Kit Arctic Mix Full DKItem TitleOrder-NoArctic Mix Full DK G39 9532 000388US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
Change language