11.07.2015 Views

mfturp-1 - SDDC - U.S. Army

mfturp-1 - SDDC - U.S. Army

mfturp-1 - SDDC - U.S. Army

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MOTOR TRANSPORTATION SERVICE PROVIDER RULESSECTION Bequipment/SNS equipment will not be reinstated until repairs or replacement are madeand the system tested as per paragraph 3 above.9. TSP will ensure the shipper has annotated the BL as follows:―Satellite Motor Surveillance Service (SNS) requested. In the event of SNS system failure, driverwill immediately notify dispatcher who will contact DTTS at 1-800-826-0794. Driver mustsubsequently provide DTTS a telephonic location/status report every two (2) hours, with a finaltelephonic report upon delivery at destination, or secure holding area, whichever is closer.‖10. SNS VENDOR (SNSV) QUALIFICATION REQUIREMENTS AND STANDARDSa. SNSV Qualification Process: Any satellite vendor seeking to qualify as DoD-approvedSNS vendor must be able to continuously support DoD’s mission requirement to monitorthe movement of SNS shipments 24-hours a day, 7 days a week, 365 days per year. Inorder to meet this fundamental qualification standard, the vendor must possess thenecessary technical and system redundancy, including at a minimum the followingrequirements:1) Redundant hardware and satellite infrastructure and architecture in the vendor’sprimary network operations center.2) A separate fully functional, geographically-dispersed contingency site that candemonstrate complete and separate capability to ensure continuous operations.3) A qualified technical staff available 24/7/365 with the expertise to provideassistance to any inquiry from the DTTS staff regarding an in-transit SNSshipment.4) Evidence of written certification that Sections 1-3 above are in place andavailable in support of the DTTS mission.5) Hazards of Electromagnetic Radiation to Ordnance (HERO) testing. Electricalor battery powered equipment must be tested and DoD HERO certified. Thevendor is responsible to ensure HERO certification is provided. The vendor willbe provided with DoD points of contact to assist in the HERO certificationprocess.6) An interested vendor will present its request for qualification, whichsufficiently demonstrates the relevant equipment/system/functional capabilities tothe DTTS Program Management Office (PMO) for review and analysis. If it isinitially determined that a prospective vendor system and their functionalIssue Date: 29 March 2011 Effective Date: 01 April 2011Military Surface Deployment and Distribution Command1 Soldier WayScott Air Force Base, IL 62225-141-

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!