ONE COMPONENT SYSTEM PUMP HVP 200 - Scanrex

ONE COMPONENT SYSTEMPUMP HVP 200HVP 200 equipped with material pressure regulator for pulsationfreeapplication and a pneumatic controlled material valve.HVP 200 pump and dose high viscosity one component materialsHVP 200 is an air driven doubleactingpiston pump for pumping,dosing and application of highviscosity material direct from 20litre delivery container.The machine is used forpumping different kinds of glue,sealing compounds and grease.SCANREX INDUSTRISERVICE ABBox 70, Visit address: Prästängsv. 12SE-452 22 Strömstad SWEDENTel +46 526 15040 Fax +46 526 15121E-mail: office@scanrex.se Web: www.scanrex.seRetailer

Two HVP 200 pumps with PLC control and pump change unitfor easy shift of material container without production stop.Technical data HVP 200Pressure ratio35:1 55:1Material pressure max 210 bar 330 barAir consumption l/minute. 150 l/min 200 l/minat 6 bar and 20 double strokes.Standard HVP 200- Air pressure regulator.- Air manometer.- Pump frame with control box.- Pressure plate for 20-25 litres material container.- Air bleeding valve for the pump body.Air pressure maxCapacity6 bar30 cm³/double strokeAir hose connection int R 3/8”Material hose connection int R 1/2”Shaft sealingPTFEO-ringsVITONSleevet (pressure plate)NEOPRENPump shaftHard chromed steelVentil seat/coneHardened tool steelMeasurements/WeightFloor space, width x length 640 x 450 mmHeight min/max1120/1610 mmHeight material container max 400 mmMaterial container std20 litresWeight std pumpapp. 60 KgNoise level