z/VM: TCP/IP Messages and Codes - z/VM - IBM

BOOTPD and DHCPD MessagesTCP0511EIP address specified on the CLIENTstatement is the same as a previouslyspecified CLIENT IP addressExplanation: A CLIENT statement specified an IPaddress that is already reserved by a previous CLIENTstatement.System Action:terminates.Processing of the statementUser or Operator Response: Correct the statement inthe machine file and reenter the command orsubcommand that read the file.Source File:TCP0520EExplanation:specified.DHCPD EXECIP address is missingAn IP address was expected but notSystem Action: Execution of the subcommand orstatement terminated.User or Operator Response: If the error was causedby a statement in a machine or configuration file,correct the statement in the file and reenter thecommand or subcommand that read the file. If theerror was caused by a subcommand, reissue thesubcommand with the operand correctly specified.Source File:TCP0521EExplanation:DHCPD EXECHardware type is missingThe hardware type was not specified.System Action: Execution of the subcommand orstatement terminated.User or Operator Response: If the error was causedby a statement in a machine file, correct the statementin the file and reenter the command or subcommandthat read the file. If the error was caused by asubcommand, reissue the subcommand with theoperand correctly specified.Source File:TCP0522EExplanation:DHCPD EXECClient ID is missingThe client ID was not specified.System Action: Processing of the statement orsubcommand terminates.User or Operator Response: If the error was causedby a statement in a machine file, correct the statementin the file and reenter the command or subcommandthat read the file. If the error was caused by asubcommand, reissue the subcommand with theoperand correctly specified.Source File:DHCPD EXECTCP0523EExplanation:Class name is missingThe class name was not specified.System Action: Processing of the statement orsubcommand terminates.User or Operator Response: If the error was causedby a statement in a machine file, correct the statementin the file and reenter the command or subcommandthat read the file. If the error was caused by asubcommand, reissue the subcommand with theoperand correctly specified.Source File:TCP0524EExplanation:DHCPD EXECVendor name is missingThe vendor name was not specified.System Action: Processing of the statement orsubcommand terminates.User or Operator Response: If the error was causedby a statement in a machine file, correct the statementin the file and reenter the command or subcommandthat read the file. If the error was caused by asubcommand, reissue the subcommand with theoperand correctly specified.Source File:TCP0530EExplanation:DHCPD EXECIP address is not validAn IP address was incorrectly specified.System Action: Processing of the statement orsubcommand terminates.User or Operator Response: If the error was causedby a statement in a machine file, correct the statementin the file and reenter the command or subcommandthat read the file. If the error was caused by asubcommand, reissue the subcommand with theoperand correctly specified.Source File:TCP0531EDHCPD EXECHardware type is not validExplanation: The hardware type was incorrectlyspecified. The value must be an integer between 0 and255, inclusive.System Action: Processing of the statement orsubcommand terminates.User or Operator Response: If the error was causedby a statement in a machine file, correct the statementin the file and reenter the command or subcommandthat read the file. If the error was caused by asubcommand, reissue the subcommand with theoperand correctly specified.Source File:DHCPD EXECChapter 1. BOOTPD and DHCPD Messages 5