technical details - WimTec

Non-contact urinal controlMULTIThe non-contact single urinal control SanTec MULTI is basedon infrared technology at state-of-the-art and can bemounted easily and fast due to its flexible and stableinstallation frame.In collaboration with the pre-mounted installation elementSanTec FIX this single urinal control is the ideal completesystem solution for public areas.Easy and quick installationDue to compact construction.Adjustable main flushing andpre-flushing as requiredOptimal hygieneDue to non-contact release and24 h hygiene flushing.SanTec FIX MULTIUrinal assembly elementwith pre-mounted wall recessmounted box for brick lining,light construction or frontwallinstallation.matt chromiumwhiteInstallation (Dimensions in cm):Function:10-19 min 100115 (Laufen Caprino)137 (Laufen Taro Nova)51,5inletDN 15outletDN 50Height middle ofsensor 100(in elementapprox. 100-120)approx. 50active range65 (adults)Minimum stay time:4 sIntelligent pre-flushing:1 s, if urinal is not usedlonger than 5 min(only at 230 V variant)top edge floor completedtop edge floor pavement0-25Adjustable main flushing:from 1 to 10 sHygiene flushing:at 24 h non-use54

UrinalTechnical specifications:Dimensions in mm:SanTec MULTI 230 V:Operating voltage:Power consumption:Magnetic valve:230 V / 50 Hzapprox. 3 VA24 V / 50 HzMasonryTilePlasterSanTec MULTI 9 V:Battery:Battery life:Magnetic valve:Alkaline 9 V100.000 flushings (max. 2 years)cartridge 6 V217Further technical specifications:Active range:approx. 50 cm pre-adjusted30 - 70 cm adjustablePre-flushing:only at mains operation for1 s, if urinal is not used forlonger than 5 minMain flushing:1 - 10 sFlow pressure:0,05 - 0,6 MPa (0,5 - 6 bar)Static pressure: max. 0,8 MPa (8 bar)Flow rate:0,3 - 0,7 l/s at 0,3 MPa (3 bar)reducible acc. to EN 12541Water inlet:R 1/2“ inside threadWater outlet:R 1/2“ outside thread230 V50 Hz173inlet R ½“inside thread1655577Flush-mounted boxmasonry levelDimensions:Front plate:Wall mounted box:173 x 217 mm135 x 165 x 77 mm135outlet R ½“outside threadAccessory:Connection from magnetic valveto ø 32 mm plastic pipe with lipseal. Art.no.: 291 346Description Material Art.No. PGSanTec MULTI 230 V matt chromium 100 235 PG 1Non-contact, infrared single urinal control for white 100 228 PG 1230 V mains operation conists of: front panel withintegrated electronics and safety isolating transformer,mounting frame, magnetic valve and wall-recess mounted box.SanTec MULTI 9 V matt chromium 100 525 PG 1As SanTec MULTI 230 V, but for 9 V battery white 100 532 PG 1operation (incl. 9 V battery).SanTec Wall-recess mounted box 101 003 PG 1Wall-recess mounted box consists of: shut-offvalve and integrated dirt filter, flush pipe andinspection cover.Accessory: Connection from magnetic valve 291 346 PG 1to ø 32 mm plastic pipe with lip seal.SanTec MULTI 230 V (part 2) matt chromium 100 211 PG 1As SanTec MULTI 230 V, but without wall-recess white 100 204 PG 1mounted box.SanTec MULTI 9 V (part 2) matt chromium 100 426 PG1As SanTec MULTI 230 V, but without wall-recess white 100 419 PG1mounted box.SanTec FIX MULTI Urinal assembly elements see page 8655