Emerson Network Power Rack PDUs

Emerson Network Power Rack PDUsKnürr DI-STRIP ® Master-SlaveStandard CEE 7-V (UTE) / FranceDOS20035With master-slave module- If the master equipment is switched, the slavesockets are also switched (together, with a shortdelay to the master). This means convenientswitching on and off of several hard to accessdevices. Switching thresholds can be set fromoutside via potentiometer.- Note:- The master equipment power consumptionmust be continuously above the switching-onthreshold. When switching off the masterconsumer, the power consumption must fallbelow the switch-off threshold.- 19” installation option (with length 483 mm)- Socket rotation: 45°- Cable: H05VV-F 3G 1.5 mm 2- Molded right angle plugMaterial/finishHousing: closed sheet steel extrusion, zincpassivated,powder-coated texturePlastic parts: Vampamid 6 0024 VO (UL94), recyclableInternal conductor: full-length busbar, brassApprovals/certificates- CE Symbol in accordance with Low VoltageDirective 2006/95/EC- EMC Directive 2004/108/EC- GS- CB-schemeColor combinationFinal digit of order number .1:RAL 7035 light grayPlastic parts: RAL 7035 light grayLoad ratingMax. 250 Vac/16 ATechnical dataSwitching threshold setting rangeOn: 20 mA - 200 mA (approx. 55 mA deliverystatus)Off: 16 mA - 160 mA (approx. 44 mA deliverystatus)Switching delay: 550 ms +/- 20 %Electronic module: 2-pole switchingDimensionsSocket spacing: 50 mmHeight: 45.5 mmHousing width: 44.4 mm (= 1 U)Cable 2.5 mSupply schedule1 socket strip2 mounting bracketsL S n F1 F2 19” Safe Model Order no. UP683 9 • •483 5 • • •03.414.009.1 1 unit03.414.005.1 1 unitDimensions in mm: L = Length, S = Switch, n = Number of sockets,F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation,Safe = Child-safe, U =Standard height unit, UP = Unit of packaging,= Express itemConversion: 1 mm = 0.03937 inch 1 kg = 2.2046 poundReplace .x with the number of your color combination:.1 = RAL 7035, .6 = RAL 7035/RAL 20032.52