Pumps - Bürkle GmbH

Repro sample divider | high-precision sample dividerLaser diffractionA typical field of application for the new Repro has opened up in particle sizeanalysis by laser diffraction spectroscopy. Sample amounts of < 0.1 g are used foranalyses in the laboratory. The Repro vastly improves the reproducibility andmeaningfulness of the results.Easy handlingThe operation and handling of the device is simple. The sample tubes are easilyand quickly inserted in the self-locking holders and sample division can start immediately.Operation takes place via a membrane-protected keyboard.High quality materialsAll parts coming into contact with the sample are made of stainless steel and aluminiumequipped with an abrasion-resistant non-stick coating for ideal sampletransport. The housing is made of electro-polished stainless steel.Vibration steplessly adjustableThe strength of vibration of the feed channel and distributorhead can be set steplessly between 0 % and100 %. This means that the material flow, dependingon the flow behaviour of the sample, can be controlledduring the whole division process.The pre-divider prevents agglomerationGreasy or moist bulk materials tend to form agglomerates.These disturb the continuous flow of the samplein the feed channel to the divider head. They mayresult in the sample division not working accurately.The heavily vibrating pre-divider largely destroys theagglomerates and provides a fully uniform structure.The pre-divider is an indispensable accessory if agglomeratesmust be divided. It is attached with littleeffort instead of the filling funnel.SummarySamples divided with the high-performance sample divider Repro are characterisedby a significantly lower variation between all part-samples. As a result of thevibration of all device components transporting samples, the sample is distributedand divided considerably more evenly and therefore more exact than was previouslypossible. The cleaning function guarantees complete sample removal, thesample is divided down to the last particle. In this way, the Repro defines a newtechnological standard and should always be used wherever the best possible analyticalresults are required. Only when all the links in the sampling chain, sampledivision and analysis are of the same strength will the results and the conclusionsdrawn from them lead to success.Repro sample dividerPrice €Item no.8412,55 5500-1000 N2AccessoriesDescription Price € Item no.Protective cabin for Repro 1523,80 5500-0100 N2Predivider for Repro 0451,10 5500-0200 N2Sampling tubes with lid, 5 ml 0002,37 5500-0915 N2Sampling tubes with lid, 10 ml 0002,37 5500-0916 N268www.buerkle.de | info@buerkle.de | Hotline +49 (0) 76 35 8 27 95-0