Control valves type KDM - Air Trade Centre
Control valves type KDM - Air Trade Centre
Control valves type KDM - Air Trade Centre
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
B.04Round control<strong>valves</strong><strong>KDM</strong>Volume control dampersWith rubbersealingGalvanized steelMale<strong>Control</strong> <strong>valves</strong> <strong>type</strong> <strong>KDM</strong>Circular control <strong>valves</strong> with manual quadrantMaterial Galvanized steelAccessories <strong>Control</strong>e valve <strong>type</strong> <strong>KDM</strong> can be motorized with a actuator <strong>type</strong> LM, NM, LFor NF/SF If used with servomotor <strong>type</strong> LM, a mounting plate <strong>type</strong> MP-LM is obligatory.An axe extension <strong>type</strong> AEX-12/M6 100 mm is necessary for <strong>KDM</strong> 80 until <strong>KDM</strong>250 If used with servomotor <strong>type</strong> NM, a mounting plate <strong>type</strong> MP-NM is obligatory.An axe extension <strong>type</strong> AEX-12/M6 100 mm is necessary for <strong>KDM</strong> 80 until <strong>KDM</strong>250 If used with servomotor <strong>type</strong> LF, a mounting plate <strong>type</strong> MP-LF is obligatory. Anaxe extension <strong>type</strong> AEX-12/M6 100 mm is necessary for <strong>KDM</strong> 80 until <strong>KDM</strong> 250 If used with servomotor <strong>type</strong> NF or SF, a mounting plate <strong>type</strong> MP-NF/SF isobligatory. An axe extension <strong>type</strong> AEX-12/M6 100 mm is necessary for <strong>KDM</strong>80 until <strong>KDM</strong> 250 An actuator with more than 5Nm (NM, NF or SF) is recommended for <strong>KDM</strong> size560 and 630Other available products <strong>Air</strong> tight control <strong>valves</strong>, <strong>type</strong> AKH <strong>Control</strong> valve with resistance up to 200°C (on demand)Text for tender A circular control valve with manual quadrant is used for a good regulation of theair flow. If necessary the valve can be motorized by replacing the manual quadrantinto a servomotor <strong>type</strong> Belimo LM. In that case a mounting plate (<strong>type</strong> ATCMP-LM) and axe extension (<strong>type</strong> ATC AEX-12/M6 100 mm) are recommanded. <strong>type</strong> ATC <strong>KDM</strong>B.04 <strong>KDM</strong> 1/5 - 2014/5/8 - BE-ENwww.airtradecentre.com
B.04Round control<strong>valves</strong>Pressure losses and sound levelsB.04 <strong>KDM</strong> 3/5 - 2014/5/8 - BE-ENwww.airtradecentre.com
B.04Round control<strong>valves</strong>B.04 <strong>KDM</strong> 4/5 - 2014/5/8 - BE-ENwww.airtradecentre.com
B.04Round control<strong>valves</strong>B.04 <strong>KDM</strong> 5/5 - 2014/5/8 - BE-ENwww.airtradecentre.com