Spray Equipment - Backpack Sprayers - Powell Equipment Parts

PUMPS & SPRAY EQUIPMENTHypro Roller Pumps w/Super Rollers4 ROLLERROLLER PUMPSWITH SUPER ROLLERSSERIES 4101 ROLLER PUMPS ARE DESIGNED FOR DIRECT DRIVE OR FOR BELT-AND-PULLEY DRIVE WITH EITHERELECTRIC MOTORS OR GAS ENGINES. OPERATES AT SPEEDS UP TO 2600 RPM. POLYPROPYLENE ROLLERSOUTPUT: 7GPM AT 2600 RPM 25 PSICAST IRON HYPRO PUMPS ARE USED FORMAXIMUM PRESSURE: 150 PSIPUMPING LARGE QUANTITIES OF WATER, WEEDSHAFT: 5/8"CONTROL CHEMICALS, PEST CONTROL CHEMI-PORTS: 3/4" NPTCALS, FUMIGANTS, ETC.PART NO. MATERIAL WEIGHT712-478 CAST 5 LBS.6 ROLLER4101CSERIES 6500 PUMPS ARE EXTREMELY VERSATILE DESPITE THEIR LOW COST. THEY HAVE SEALED BEARINGS ANDARE ADAPTABLE TO BOTH 540 AND 1000 RPM PTO SHAFTS. OPERATE AT SPEEDS UP TO 1200 RPM.OUTPUT: 7.4GPM AT 540 RPM, 50 PSI, 15 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 5/8"PORTS: 3/4" NPTHORSEPOWER: .15 TO 4.5CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROLCHEMICALS, FUMIGANTS, ETC.PART NO. MATERIAL WEIGHT712-376 CAST 9 LBS.6 ROLLER REVERSE ROTATION PUMPSERIES 6500 PUMPS ARE EXTREMELY VERSATILE DESPITE THEIR LOW COST. THEY HAVE SEALED BEARINGS ANDARE ADAPTABLE TO BOTH 540 AND 1000 RPM PTO SHAFTS. OPERATE AT SPEEDS UP TO 1200 RPM. OUTPUT: 7.4GPM AT 540 RPM, 50 PSI, 15 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 5/8"PORTS: 3/4" NPTHORSEPOWER: .15 TO 4.5REVERSE ROTATION ROLLER PUMPPART NO. MATERIAL WEIGHT712-379 CAST 9 LBS.7 ROLLER6500CT3CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROL CHEMI-CALS, FUMIGANTS, ETC.6500CRSERIES 7700 ROLLER PUMPS, WITH SCOOPLESS ROTOR DESIGN AND EXTRA WIDE ROLLER SLOTS HAVE PLENTYOF CAPACITY FOR JET AGITATION. FOR 540-RPM PTO SHAFTS.OUTPUT: 12.9 GPM AT 540 RPM, 50 PSIMAXIMUM PRESSURE: 200 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .11 TO 3.3PART NO. MATERIAL WEIGHT712-451 CAST 14 LBS.7 ROLLER REVERSE ROTATION PUMPCAST IRON HYPRO PUMPS ARE USED FOR PUMPINGLARGE QUANTITIES OF WATER, WEED CONTROLCHEMICALS, PEST CONTROL CHEMICALS, FUMIGANTS,ETC.7700CT3SERIES 7700 ROLLER PUMPS, WITH SCOOPLESS ROTOR DESIGN AND EXTRA WIDE ROLLER SLOTS HAVE PLENTYOF CAPACITY FOR JET AGITATION. FOR 540-RPM PTO SHAFTS.OUTPUT: 12.9 GPM AT 540 RPM, 50 PSIMAXIMUM PRESSURE: 200 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .11 TO 3.3CAST IRON HYPRO PUMPS ARE USED FOR PUMPINGLARGE QUANTITIES OF WATER, WEED CONTROLCHEMICALS, PEST CONTROL CHEMICALS, FUMIGANTS,ETC.PUMPS & SPRAY EQUIPMENTPART NO. MATERIAL WEIGHT712-453 CAST 14 LBS.SEE PARTS LIST ON NEXT PAGE7700CR455