Spray Equipment - Backpack Sprayers - Powell Equipment Parts

PUMPS & SPRAY EQUIPMENTHigh Performance Hydraulic Motor Driven Pump Model 206Parts Breakdown for 711-1104HIGH PERFORMANCE HYDRAULIC MOTOR DRIVEN PUMP150 SERIESHIGH PERFORMANCEMODEL 2061 1 / 2 " SUCTION X 1 1 / 4 " DISCHARGEHIGH PERFORMANCE PUMP - 100 PSI AT 20 GPM.PROVIDES HIGHER PRESSURE AND GREATER VOLUME FOR APPLICATIONSWITH LARGE TANKS AND LONG BOOMS.THE 206 MOTOR REQUIRES 7 GPM HYDRAULIC FLUID INPUT AND FITSVIRTUALLY ALL TRACTOR HYDRAULIC SYSTEMS.VITON MECHANICAL SEAL.RECOMMENDED FOR THE FOLLOWING HYDRAULIC SYSTEMS:-JOHN DEERE TYPE PRESSURE COMPENSATING CLOSED CENTERSYSTEMS.-CASE-IH TYPE LOAD SENSING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 7 TO 16 GPM.SHUT-OFF0 GPM120 GPM100 PSI80 PSI60 PSI20GPM100 PSI95 PSI75 PSI55 PSI40GPM80 PSI76 PSI62 PSI50 PSI60GPM60 PSI52 PSI45 PSI25 PSI80GPM30 PSI26 PSI21 PSI5 PSI100GPM10 PSI5 PSI- -- -PART NO.711-1104711-4371711-1425MFG. NO. / DESCRIPTIONFMC-150-HYD - 206 PUMPREPAIR KITSRKBAC-75-HYD ALL SEALS AND O-RINGS FOR MOTORRK-FMC-52710 REPAIR KIT FOR 206 PUMPPARTS BREAKDOWN FOR 711-1104CENTRIFUGAL PUMP/HYDRAULIC MOTORCOMBINATION PARTS LIST MODEL FMC-150-HYD-206PUMPS & SPRAY EQUIPMENTREF.NO.*122#*3#*#4567891011121313141415161718MFG.NO.BAC -4- 150BAC-6-HYDBAC-6-HYD-SSBAC-7BBAC-7VBAC-7SC40160BAC-12-150BAC-14-150-HYDBACH-23-SSBAC-24-HYD-SSBAC H -25BAC-26-150BAC -32BAC -33BAC-3740950409304111041120BAC-5441258BAC-75-HYD-206BAC-76-HYDEDPNO.400154006040061401104015140152401604025540305403914040040420104454079040810408704095040930411104112041130412584137241380DESCRIPTION150 SERIESHIGH PERFORMANCEO" Ring, volute5 /8 " Driven shaft with tang slot5 /8 " Driven shaft with tang slot. stainless steel (optional)Buna-N mechanical seal (optional)Viton mechanical seal (includes 40160 "O'' ring)Silicon carbide mechanical seal (includes 40160 "O'' ring) (optional)"O" Ring for BAC-6-HYD shaft1 1 / 2 " X 1 1 / 4 " VoluteMounting frame3 /8 " N.F. Hex nut, stainless steel3 /8 " Lock washer, stainless steel1 /8 " X 1 / 8 " X 1 / 2 " Impeller keyImpeller, w/keywayExternal snap ring, BAC-6-HYD driven shaftInternal snap ring, BAC-14-HYD-150 mounting frameSealed ball bearing, BAC-6-HYD driven shaft3 /8 " N.C. X 3 / 4 " Hex head cap screw3 /8 " N C. X 3 / 4 " Hex head cap screw, stainless steel (optional)1 /8 " NPT Pipe plug1 /8 " NPT Pipe plug, stainless steel (optional)Slinger5 /16 " N.C X 3 3 / 4 " Hex head cap screw motor to pump (for FMC-150-HYD-206)Hydraulic motor for open-center or closed-center systems wlth integral needlevalve (for Model FMC-150-HYD-206)Coupling for hydraulic motor* Items Included In 711-1425 repalr kit. # Not shown on cross section drawlngREQ.11111111111122244331411PARTNO.711-3015711-3060711-3061711-3110711-3151711-3160711-3391711-3400711-3420711-3990711-3810711-4130711-4380472