VT592 User Manual - Schick Handel

VT592 User ManualVT-ENG-592-V1 1005S241. Parts and FunctionsCamera LensNight View LEDSpeaker176 mmNameplateA Call ButtonB Call ButtonMicrophoneRainy Cover90 mm23 mmMIC adjustmentSPK adjustmentConnection Port1R2W3Y4B1R2W3Y4BLK+LK-2. Terminal DescriptionsMonitor BMonitor A••1R (Red): Power positive. +12V present when Door Station calling or being monitored.••2W (White): Power negative (Ground).••3Y (Yellow): Image signal (Video signal).••4B (Black): Talk and control signal (Audio signal).••LK+,LK-:Normally opened connection port.-1-

3. Mounting3.1 Mounting Without Rainy Cover1 2 3 41160-165cm23.2 Mounting With Rainy Cover1 2 3 412160-165cm-2-

3.3 Adjusting Camera Angleuse a screwdriver to loosen the screw andthen adjust the angle of the camera ,thenfix the screw.4. System Wiring and Connections4.1 Basic ConnectionVT592 Door CameraBack ViewTo Monitor AJS_OS1RedWhiteYellowBlackRedWhiteYellowBlack1R2W3Y4B1R2W3Y4BLK+LK-Control Monitor AControl Monitor BToMonitor BJS_OS1-3-

4.2 Electric Lock Connection••Mode1:Door Lock Controlled With Dry ContactLK-LK+12+ -POWERSUPPLYMust install external power supplyfor lock,and nearly all kinds ofelectronic lock can be used.Incidentally,in this mode,you cancontinue talking and monitoringduring unlock operation.Note:1.The external power supply mustbe used according to the lock.2.The inside relay contact isrestricted to AC or DC 24V/3A.••Mode2:Door Lock Controlled With Internal PowerLK-LK+Connect with 1RConnect with 2W12-+The lock can be directly connectedwith the door station and the powerthrough monitor.During unlockoperation,the monitor will closescreen automatically.Note:1.Electronic lock of power-on-tounlockshoule be used.2.The door lock is limited to12V,and holding current must beless than 250mA5. SpecificationsPower Supply:DC 10~12V (Internal Power supply)Consumption:200mA in working state (latch not included)Video Output:75Ohm, 1Vp-p, CCIR standard (unless specified)Camera:76 degree, CCD camera with IR-LEDWorking temperature: -10ºC ~ 40ºC-4-