ToneLab Owner's Manual - Vox

F. REVERB EFFECTSHere you can make settings for the reverb effect that is played after the cabinet.You can choose one of three types of reverb.(EX):This indicates a parameter that you can control from the expression pedalof the optional foot controller.REVERB LO DAMP: knob 1 MIX: knob 2 HI DAMP: knob 3SPRING/ROOM/PLATE “LO DAMP” 0.0...10.0 “MIX” 0.0...10.0 “HI DAMP” 0.0...10.01. OFFSelect this if you don’t want to use the reverb effect.2. SPRINGA model of the most popular spring reverb system used in guitar amps.3. ROOMEmulates the natural reverberation that takes place in a medium sized room/smallhall.4. PLATEAn unerringly accurate model of the plate reverb used in countless, professionalrecording studios.[1] “LO DAMP” 0.0...10.0 Adjusts the dampening of the low-frequency range.[2] “MIX” 0.0...10.0 Adjusts the mix amount of the reverb sound.[3] “HI DAMP” 0.0...10.0 Adjusts the dampening of the high-frequency range.INPUT LEVEL (EX) This is the input level of the reverb controlled by theoptional foot controller.40