Valtra N Series

HydraulicsVersu and DirectHydraulics30On Versu and Direct models, transmission andhydraulics have separate oils. Up to 40 litres of thehydraulic oil can be used externally when the tankis filled with 58 litres of oil (47 litres with 65 litresin the tank). The pump is an axial piston type witha maximum output of 115 l/min. A 160 l/min highoutput pump is available as an option. Up to 9 workhydraulic valves are available: four at the rear, threefully-adjustable valves at the front, and two fixedflow valves at the rear. A Power Beyond implementcoupling can also be specified as an option.With the 160 l/min high output pump, thetemperature of the transmission and hydraulic oilsare balanced using a heat exchange system thatnot only cools the hydraulic oil but also transfersheat the other way when needed to ensurethat the hydraulics are not too cold in winterconditions.The new N Series also features a fullyredesigned integrated front linkage. The liftingforce and lifting range of the front linkage havebeen further increased; 35 kN of lifting force isnow available 60cm out from the linkage armconnection point.The N Series is specified with the appropriatetowing equipment for each market. Instead of astandard Nordic hitch, a telescopic hydraulic hitchis available, making it exceptionally easy to attacha trailer.All hitches can also be equipped with a K80ball hitch that allows secure trailer attachment.This both increases driving comfort anddecreases wear› Joystick controls both front and rear 1 and 2valves› Versu and Direct models available with twopairs of quick couplings› Pivoting front linkage and automatic Valtra LHLink available as an option on Versu and Directmodels› All N Series models come with an electronicAutocontrol rear linkage with an exceptionallywide lifting area. Drive Balance Control (linkarm suspension) is also standard on all NSeries models› The rear lift capacity on Versu and Directmodels is 8.1 tonnes