Valtra N Series

Four work areas: A, B, C and D.Two operating modes: automatic and manualWork Area A0-9 km/hAUtomatic modeExtremely high pulling power for small and precisespeeds. Direct models are also available with groundspeed PTO, offering optimal pulling power with trailers.Work Area B0-18 km/hUniversal range for heavy pulling tasks, such asheavy tillage, harvesting and transporting in the forest.Engine speedDriving speed, cruise onAutomatic mode is optimalfor most operationsin the field and on theroad. Automatic modeuses the highest possibletransmission ratio tooptimise fuel use.Work Area C0-27 km/hIdeal range for transporting on fields or in demandingconditions. Suitable also for a wide range of field tasksthat require power.Work Area D: road transport0-50 km/hFor general transport use when high pulling power isnot required. Suitable for transporting and high speeds.Manual ModeEngine speed, rpm cruise onDriving speedRatioManual mode can be selectedin A and B workareas. The transmissionratio is controlled solelyby driver using the CVTlever. Suitable especiallyfor harvesting tasks thatrequire specific speedsfor different conditionsand crops.Transmissions27