GearBoss Shelving System - Wenger Corporation

More documents

Recommendations

Info

DESCRIPTIONGEARBOSS SHELVING SYSTEMUpright TubeShelf Bracket, 30 1/2”, RHShelf Support Bracket48” Shelf TubeWallExtrusion AssemblyTube Support BracketFloorINSTALLATIONBEFORE STARTING THE ASSEMBLYBefore installing the GearBoss, do the following.1. All personnel, including temporary personnel, must read and understand this entire manual.2. Inventory the cartons and make sure the tube support brackets and all required components arepresent.3. Determine which floor and wall fasteners are needed (see page 4) and purchase them.4. Before beginning the installation, move the cartons near the location where the GearBoss Shelvingsystem will be installed. Refer to any architectural drawings supplied by Wenger or a contractor.5 Make sure the area is free of any obstacles or obstructions.Warning:Warning:Warning:Personal injury or damage to property may result if the instructions in this manualare not followed.Some components are awkward to handle. Serious injury or property damage mayresult if only one person attempts the installation.Always wear safety glasses and safety shoes when installing the GearBoss shelvingsystem.6
INSTALLATION (CONTINUED)LAYOUT AND TUBE SUPPORT BRACKET ATTACHMENT6. Based on the architectural drawings, layout the location of the tube support brackets. Place thetube support brackets tight with the back wall and side wall when starting in the corner.(Detail A provides measurement guidelines.)7. Mark holes of the tube support brackets on the floor.8. Secure the tube support brackets to the floor.48” (122 cm)Back WallSideWall48” (122 cm)Top ViewDetail A7
Page 2 and 3: SAFETYThroughout this manual you wi
Page 4 and 5: REQUIRED TOOLSThe following tools m
Page 8 and 9: INSTALLATION CONTINUEDINSTALLING TH
Page 10 and 11: INSTALLATION (CONTINUED)INSTALLING

GearBoss Shelving System - Wenger Corporation

Create successful ePaper yourself

Delete template?

Save as template?