GearBoss Shelving System - Wenger Corporation

DESCRIPTIONGEARBOSS SHELVING SYSTEMUpright TubeShelf Bracket, 30 1/2”, RHShelf Support Bracket48” Shelf TubeWallExtrusion AssemblyTube Support BracketFloorINSTALLATIONBEFORE STARTING THE ASSEMBLYBefore installing the GearBoss, do the following.1. All personnel, including temporary personnel, must read and understand this entire manual.2. Inventory the cartons and make sure the tube support brackets and all required components arepresent.3. Determine which floor and wall fasteners are needed (see page 4) and purchase them.4. Before beginning the installation, move the cartons near the location where the GearBoss Shelvingsystem will be installed. Refer to any architectural drawings supplied by Wenger or a contractor.5 Make sure the area is free of any obstacles or obstructions.Warning:Warning:Warning:Personal injury or damage to property may result if the instructions in this manualare not followed.Some components are awkward to handle. Serious injury or property damage mayresult if only one person attempts the installation.Always wear safety glasses and safety shoes when installing the GearBoss shelvingsystem.6