Dynamic Shift Registers - Bitsavers - Trailing-Edge

absolute maximum ratingsDrain Voltage (Voo )Gate Voltage (V GG)Clock I nput (V 1 )Data InputsPower Dissipation (Note 1)Operating Temperature MM404, MM504MM405, MM505Storage Temperature+0.5V to -25V+0.5V to -25V+0.5V to -25V+0.5V to -25V300 mW-55°C to +125°C-25°C to +70°C-65°C to +150°Celectrical drive requirements (Note 1)PARAMETERClock pulse WidthH"Vss -0.5 Vss -1.5Logic "V4>L" Vss -14.5 Vss -16.0 Vss -lB.OData Input Voltage LevelsLogic "V'HLogic "V'L"Data Setup Time, td,Data Hold Time, tdhVss -7.00.20.03Vss -2.5UNITS/lS/lS/lS/lSVVVV/lS/lSelectrical characteristics (Note 2)PARAMETERCONDITIONMINTYPMAXClock Repetition Rate Fan·Out "1"dc1.0Data Output Voltage LevelsLogic "VOH Vss -1.5Logic "VOL"Vss -B.OData Input Capacitance f = 1 MHz 1.53.0(Each Input)Y'N = OVClock line Capacitance f = 1 MHz, -20V Bias MM404, MM504 9.5MM405, MM505lBOV Bias MM404, MM504 15.0MM405, MM505 25Output Impedance Outputs at Logic "0" 0.5Output I mpedance Pins 2 & 6 Outputs at Logic" 1" 15 20Impedance Pin 8 All Other Pins at GND 7.5 10Breakdown Voltage1.0/lA Test CurrentT A = 25°COn Pin 1 GND on Pins 2,3,4,5,6,7-llVon Pin 8-25On Pin 7 GND on Pins 1,2,3,4,5,6-llV on Pin 8-25Leakage Current T A = 25°CPin 1V'N=-lBV,Va=-llVAll Other Pins at GNDPin 7Y'N = lBV, Va = -llVAll Other Pins at GNDPin BY'N = -BVAll Other Pins at GNDPower Supply Current Drain Outputs at Logic "0"(voo)1 MHz OperationT A = 25°CMM404, MM504 5.5MM405, MM505 10.0153020401.02512.50.50.50.510.015.0UNITSMHzVVpFpFpFpFpFkr!kr!kr!VV/lA/lA/lAmAmANote 1: For operating at elevated temperatures, the device must be derated based on a 150°C maximumjunction temperature and a thermal resistance of 150 o C!W junction to ambient. The full ratingapplies for case temperatures to +125°C.Note 2: These specifications apply over the specified temperature ranges for -11 V < V DO < -9.5V,and -18V