Dynamic Shift Registers - Bitsavers - Trailing-Edge

absolute maximum ratingsVplus Supply Voltage +25VVminus Supply Voltage -25VVplus-Vminus Differential Voltage40VLogic I nput Voltage25VPower Dissipation (Note 3) 1.36WOperating Temperature RangeAH2114_55°C to +125°CAH2114CO°C to +85°CStorage Temperature Range_65°C to +125°CLead Temperature (Soldering, 10 sec) 300°Celectrical characteristics (Notes 1 and 2)AH2114AH2114CPARAMETER CONDITIONS UNITSMIN TYP MAX MIN TYP MAXStatic Drain-Source 10 = 1.0 mA, VGS = OV, TA = 25°C 75 100 75 125 n"On" Resistance 10 = 1.0 mA, VGS = OV 150 160 nDrain-Gate Vos = 20V, VGS = -7V, T A = 25°C 0.2 1.0 0.2 5.0 nALeakage Current 60 60 nAFET Gate-Source IG = 1.01lA 35 35 VBreakdown Voltage Vos = OVDrain-Gate VOG = 20V, Is = 0 4.0 5.0 4.0 5.0 pFCapacitance f = 1.0 MHz, T A = 25°CSource-Gate VOG = 20V, 10 = 0 4.0 5.0 4.0 5.0 pFCapacitance f= 1.0MHz, TA =25°CInput 1 Turn-ON Time V 1N1 = 10V, T A = 25°C 35 60 35 60 ns(See Figure 1)Input 2 Turn-ON Time V 1N2 = 10V, TA = 25°C 1.2 1.5 1.2 1.2 Ils(See Figure 1)Input 1 Turn-OFF Time V 1N1 = 10V, TA = 25°C 0.6 0.75 0.6 0.75 Ils(See Figure 1)Input 2 Turn-OFF Time V 1N2 = 10V, TA = 25°C 50 80 50 80 ns(See Figure 1)DC Voltage Range T A = 25°C ±9.0 ±10.0 ±9.0 ±10.0 V(See Figure 2)AC Voltage Range TA = 25°C ±9.0 ±10.0 ±9.0 ±10.0 V(See Figure 2)Note 1: Unless otherwise specified these specifications apply for pin 12 connected to +15V, pin 2connected to -15V, -55°C to 125°C for the AH2114, and OoC to 85°C for the AH2114C_Note 2: All typical values are for T A = 25°C.Note 3: Derate linearly at 100oC/W above 25°C.156