AEB225B - Herber Aircraft

Installation1. Simply remove the plug from the bottom of the oil 2. Take hold of the knurled nut and with a combinasumpand install the drain valve in the port. Wrench tion push-twist motion open the valve.tighten carefully. Safety wire valve to sump.4. To close, twist the knurled nut. The spring-loadedvalve will automatically close.3. Allow the oil to drain.NOTE: Verify that installation of the valve does notrestrict travel of retractable landing gear. Conductretract test if necessary. Hose may be trimmed orremoved.__Eaton CorporationAs . ffi ~~~~Aeroquip Group f/ \- xeroqu^ * p aEngineeredSystems Division,roqdiprVow w S300 South East AvenueJackson, Michigan 49203-1972517/787-8121, Fax: 517/787-5758www.aeroquip.comSpefci n ubject to change without notice.Aeroquip products an: protected by patents intenationafly.