TracVision DIRECTV Mobile Receiver/Controller User's Guide
TracVision DIRECTV Mobile Receiver/Controller User's Guide
TracVision DIRECTV Mobile Receiver/Controller User's Guide
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>DIRECTV</strong> <strong>Mobile</strong> <strong>Receiver</strong>/<strong>Controller</strong> User’s <strong>Guide</strong>10-4 System Status LightsSystem Status LightsThree status lights on the front of the mobile receiverindicate the current status of the system and can helpyou identify problems.During normal operation, all three status lightsshould be lit green. The following tables explain whatthe different light conditions indicate.If multiple receivers are connected, theANTENNA light on secondary receivers willremain off at all times. Only the primaryreceiver can monitor antenna status.VOLTAGE Light IndicationsLight is... Indicates DescriptionOff Off <strong>Receiver</strong> is OFF (power switch is off) or no power inputGreen OK Good power (between 10-16 VDC at receiver)Green, flashing Cable Open Open detected in antenna cable (check antenna coax connection)Orange Low Power Low power (between 8-10 VDC at receiver)Red, flashing Bad Power Insufficient power (less than 8 VDC or more than 16 VDC input)10.1054-0376