TracVision DIRECTV Mobile Receiver/Controller User's Guide

DIRECTV Mobile Receiver/Controller User’s Guide5. The Lock System pop-up panel appears. Enter afour-digit passcode using the remote control’snumeric keypad.6. Highlight the OK button and press SELECT.To abort the locking process, highlight theCancel button and press SELECT.7. Enter the code again to confirm, then highlightthe OK button and press SELECT.Once you select OK, the mobile receiver islocked. You must enter the proper passcodeto unlock it. A lock icon appears in theprogram guide and channel banner toremind you that the system is locked.Overriding the System LockWhen the system is locked, inaccessible channels willshow a “limit exceeded” message. To temporarilyoverride the system lock, follow the steps below.1. While the “limit exceeded” message is onscreen,press SELECT.2. Enter your four-digit passcode using the remotecontrol’s numeric keypad.3. Highlight the OK button and press SELECT.An icon indicating lock override appearsunder the date/time whenever theprogram guide or channel banner isdisplayed.If you forget your four-digit code, please callDIRECTV at 1-800-DIRECTV (347-3288).7.454-0376