TracVision DIRECTV Mobile Receiver/Controller User's Guide

TracVision DIRECTV Mobile Receiver/Controller User's Guide TracVision DIRECTV Mobile Receiver/Controller User's Guide

manuals.solidsignal.com
from manuals.solidsignal.com More from this publisher
11.07.2015 Views

System Wiring DiagramsTwo Mobile Receiver/Controllers and OneStandard-Def Home ReceiverComponents Required• Two Splitter Kits, KVH P/N 72-0177• (TracVision M3/M2 only) A Splitter Kit is includedin the Extra Receiver Kit (P/N 01-0288-01).• Destacker, Single-output, KVH P/N 19-0347• The special DC block (40V) splitter included inthe Splitter Kit permits communications betweenthe antenna and the primary receiver/controller.A standard off-the-shelf splitter will not work.Installing the Second Mobile Receiver/Controller• Refer to “Two TracVision Mobile Receivers” onpage A.7 for details.Why Do I Need a Destacker?• The output of the TracVision antenna is a specialstacked signal, which the mobile receiver/controller is configured to decode. Since all homereceivers are configured to decode unstackedsignals, a destacker is needed to convert theantenna’s stacked signal into an unstacked signal.Compatible DIRECTV Receiver Models• The TracVision antenna is compatible with allnew DIRECTV-branded, standard-definition(non-HD) receiver models manufactured today.Older, non-DIRECTV-branded receiver modelsare not supported.54-0376A.15

CAUTIONDIRECTV Mobile Receiver/Controller User’s GuideWiring Diagram for One Mobile Receiver/Controller and One Standard-Def DVRTo AntennaKVH Mobile Receiver/Controller (12VDC)DC Block(40V) SplitterANTENNASECONDARYPRIMARYTested to complywith FCC StandardsVIDEO AUDIO L AUDIO RS -VIDEODIGITALAUDIORFOUTREMOTEINPUTThis device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions: (1) This device must not cause harmfulinterference, and (2) This device must accept any interference received,including interference that may cause undesired operation.TO110W/HDTO KVHCONVERTER ANTENNAFUSE (8A)POWER (10-16V DC)MAINTENANCE PORTSUSBRS232This receivercontrols satelliteselectionStackedSignalStacked SignalDestacker(Dual-output)INPUTTo RECEIVER2 1 To TVStandard-Def Digital Video Recorder, DVR (AC)UnstackedSignalsSATELLITE INTV ANT/CABLE IN(NOT SATELLITE)RLDIGITALAUDIO OUTSATELLITE IN 11SATELLITE IN 22OUT TO TVAUDIO VIDEO S-VIDEOPHONE JACKA.1654-0376

System Wiring DiagramsTwo <strong>Mobile</strong> <strong>Receiver</strong>/<strong>Controller</strong>s and OneStandard-Def Home <strong>Receiver</strong>Components Required• Two Splitter Kits, KVH P/N 72-0177• (<strong>TracVision</strong> M3/M2 only) A Splitter Kit is includedin the Extra <strong>Receiver</strong> Kit (P/N 01-0288-01).• Destacker, Single-output, KVH P/N 19-0347• The special DC block (40V) splitter included inthe Splitter Kit permits communications betweenthe antenna and the primary receiver/controller.A standard off-the-shelf splitter will not work.Installing the Second <strong>Mobile</strong> <strong>Receiver</strong>/<strong>Controller</strong>• Refer to “Two <strong>TracVision</strong> <strong>Mobile</strong> <strong>Receiver</strong>s” onpage A.7 for details.Why Do I Need a Destacker?• The output of the <strong>TracVision</strong> antenna is a specialstacked signal, which the mobile receiver/controller is configured to decode. Since all homereceivers are configured to decode unstackedsignals, a destacker is needed to convert theantenna’s stacked signal into an unstacked signal.Compatible <strong>DIRECTV</strong> <strong>Receiver</strong> Models• The <strong>TracVision</strong> antenna is compatible with allnew <strong>DIRECTV</strong>-branded, standard-definition(non-HD) receiver models manufactured today.Older, non-<strong>DIRECTV</strong>-branded receiver modelsare not supported.54-0376A.15

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!