SpeakerTimer - D'san

SpeakerTimer= Keeps time at lectures, forumsand legal proceedings= Maintains schedule and pace ofprograms= Builds confidence that no one’stime is unfairly curtailed= Spares moderators the needto interrupt= Helps speakers end smoothlywww.dsan.com/Brochures/LimitimerBrochure.EN.pdf

FunctionsSet programsFour programs can retain Total Time, Sum-Up Time, TimeRemaining, beep and blink settings. Program 4 (Session)can run in background.on1 2 3 4 5 6 7 8 9 10on1 2 3 4 5 6 7 8 9 10PRO-2000AV-2000Set program options· Beep : Audible cues are sounded on light changes· Blink : Red light begins to blink 30 seconds after itcomes on· Beep-Blink : Audible cue sound intermittantly whilered light blinksSet global options· Count-up / Count-down· Stop clock on 0:00 or continue counting past Total Time· Count minutes : seconds or hours : minutes· Allow time changes while clock is running or lock settingskeys on Start· Select type of audible cues : ring, buzz or chime· Sound audio cue on signal light only or on signal light andtime consoleConfigure controlConnect two Limitimer timer consoles to one or more signallights; Both timers allow start/stop controlConnect remote signal lightsInterconnect one or more signal lights on a single Cat-5 orXLR cable or via an RF link.Remote Signal LightsPodium signal lightsPSL20V3.6” (W) x 3.2” (L) x 2.2” (H).Select sounds, display time remainingclock, phase lights or both; disable toplights for timing privacy; daisy-chainmultiple signal lights on a Cat-5 or XLRcable; each can be set to receive outputfrom one, all or any combination ofprograms.Audience signal lightsASL4ND3 ASL2ND3High quality 7-segment LEDdigits (4” or 2” high). Displaystime remaining, or whenLimitimer console is turned off,the current time ofday (with batterybackup). Stagestand and wallmountingclips..Video Time DisplayVideo ClockDisplay time remaining and signal lights on largeformat video screens. VC-2000 is a Cat5—USBdongle that passes data from Limitimer to PChostedcompanion software. The softwareconfigures the display with user-controlled size,color, background, position and transparency. Theoutput may be displayed alone or on top of otherapplications such as PowerPoint©. Video Clockobjects may be enabled or disabled, madetransparent, translucent and sized for variouseffects. Custom bitmaps can be created andconfigurations saved for quick launch.Custom Signal LightsPSL-20VFFlush mount signal light (4” x2.5”) for installation intopodiums or dais of conferencerooms and legislativechambers. May beincorporated intocontrol panels withother components.D’San Corporation142 Mineola Ave, Roslyn Heights, NY 11577Tel: 516 625-5608Fax: 516 625-0878www.dsan.cominfo@dsan.com

Wireless connections to the remote signal lightsD'San offers two wireless technologies for connecting Limitimer signal lights to a timer: One is based on aBluetooth© protocol the other on low-power 433 MHz transmitter-receiver devices. Both provide about thesame range (200-300 feet). And both are configured so that the receiver unit can be optimally placed anddraw local AC power. Multiple signal lights can connect via Cat5 cable to the receiver.One to manyPRO-2000RFSelect this option only if no other Limitimers or DSan cuelights are being used in proximity. The receiver is locallypowered and may drive up to 4 signal lights. Multiplereceivers may be used to control signal lights in differentlocations within a radius of about 200-feet from one timer.Transmitter operates on 433MHz.One to onePRO-2000BTSelect this option when using DSan cue lights or otherwireless Limitimer systems in proximity. The transmitter andreceiver will lock onto one another and provide secure andinterference-free communication via Bluetooth protocol. Thereceiver is locally powered and may drive up to 4 signallights. Any number of transmitter-receiver pairs can be usedin proximity.A second (slave) timer may be connected to the Bluetoothreceiver. Both timers may start/stop clock and set times.Touch Panel ControlTP-2000XA Cat-5 to DB-9 adapter that passes serial data asASCII control codes between Limitimer and populartouch panel central conrollers. Touch panel canaccess all timer functions including setting times,starting and stopping clock, beep and blink.Network communicationsIP-2000XA serial-to-Ethernet adapter that can be configured aseither a server or cllient. Allows Limitimer to driveremote signal lights or a remote slave timer over theInternet or within a local area network (LAN). Theadapter’s IP address can be configured via USBconnection to a PC application to enableuse between different networks.D’San Corporation142 Mineola Ave, Roslyn Heights, NY 11577Tel: 516 625-5608Fax: 516 625-0878www.dsan.cominfo@dsan.com

AccessoriesPRO-200RF CS-518Shipping/carrying case for Limitimer PRO 2000CS-827Shipping/carrying case for Limitimer PRO 2000 andaudience signal light (ASL4-ND3)KES 882Adapter Male XLR-to-RJ45 (Cat 5)RFR-2000Extra wireless receiver for Limitimer PRO-2000RFWP-1, 2, 3External power supply (110 or 220 volt)wigth plug for USA, UK or EuropeLocal Sales RepresentativeHow to purchase LimitimerLimitimer PR0-2000 is sold as a system consisting of a timer console, remote signal light (PSL20V), 50-foot Cat-5cable, and external power supply (110 or 220V). Model AV-2000 is a low-profile version that has the same timingfeatures, but does not contain an on-board XLR jack and is not compatible with older Limitimer signal lights.,D’San Corporation142 Mineola Ave, Roslyn Heights, NY 11577Tel: 516 625-5608Fax: 516 625-0878www.dsan.cominfo@dsan.com