LAMINEX® FUSION®

POSTFORMING FUSION ® LAMINATES
You cannot postform Laminex Fusion surfaces.
CREATING WALL MURALS
Wall murals can be achieved by splitting an image into multiple tiles of laminate sheets.
Special consideration should be given to the graphic design process as the image formatting
needs to be constructed to allow image edges to evenly match up against each other.
ENSURING THE RIGHT SURFACE FINISH
����������������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������
FUSION XTRA GRADE
Fusion Xtra Grade is the standard grade of laminate. It is suitable for a wide range of
applications, including table tops, counters and bench tops. It always requires bonding to a
suitable substrate for all applications.
BONDING FUSION SURFACES TO A SUBSTRATE
Fusion Xtra Grade needs to be bonded to a moisture resistant substrate such as
particleboard, MDF or plywood. Fusion Wet Area Panelling requires bonding to a timber
�������������������������������������������������������������������������������������������������
line with standard industry procedures. For more details, visit laminex.com.au
AVAILABILITY
Our vision is to be able to supply laminate to virtually any destination in the world.
THE FUSION SURFACES BRAND
The Laminex Group is the sole owner of the Laminex Fusion surfaces brand. The Laminex
Group is the leading manufacturer and distributor of decorative surface solutions in
Australia and New Zealand. Laminex Fusion surfaces were developed with the aim of
combining Laminex Group’s unrivalled knowledge and experience in high pressure laminate
�����������������������������������������������������������������������������������������
design possibilities.
For more information visit laminex.com.au or call The Laminex Group on 1800 003 988
(within Australia) or 0800 303 606 (within New Zealand).