LAMINEX® FUSION®

More documents

Recommendations

Info

TECHNICAL INFORMATION HOLDING FILES FOR FUTURE REFERENCE �� The images remain the exclusive property of the designer and the CD is held as a reference for future repeat orders, only with permission from the designer. DESIGN COPYRIGHT �� has been granted. 3D OBJECTS �� scan a transparency. This will provide the highest quality result. CREATING SOLID COLOURS It is possible to closely match some colours. However, you need to be aware that the �� Also, dark solid colours are not available. COLOUR REPRODUCTION Although the images of our Fusion surfaces set out in this brochure and on our website are as accurate as we can make them, different computers and print outs offer different quality images. As a result, we do not guarantee that the images in this brochure or on your computer exactly match the Fusion surfaces product. We will not be liable to you for any apparent differences when the Fusion surfaces product has been manufactured in �� colour details on each of our designs upon your request. We also strongly recommend that you order a sample. DURABILITY �� hardwearing and resilient to most spills, stains and everyday use.
POSTFORMING FUSION ® LAMINATES You cannot postform Laminex Fusion surfaces. CREATING WALL MURALS Wall murals can be achieved by splitting an image into multiple tiles of laminate sheets. Special consideration should be given to the graphic design process as the image formatting needs to be constructed to allow image edges to evenly match up against each other. ENSURING THE RIGHT SURFACE FINISH �� FUSION XTRA GRADE Fusion Xtra Grade is the standard grade of laminate. It is suitable for a wide range of applications, including table tops, counters and bench tops. It always requires bonding to a suitable substrate for all applications. BONDING FUSION SURFACES TO A SUBSTRATE Fusion Xtra Grade needs to be bonded to a moisture resistant substrate such as particleboard, MDF or plywood. Fusion Wet Area Panelling requires bonding to a timber �� line with standard industry procedures. For more details, visit laminex.com.au AVAILABILITY Our vision is to be able to supply laminate to virtually any destination in the world. THE FUSION SURFACES BRAND The Laminex Group is the sole owner of the Laminex Fusion surfaces brand. The Laminex Group is the leading manufacturer and distributor of decorative surface solutions in Australia and New Zealand. Laminex Fusion surfaces were developed with the aim of combining Laminex Group’s unrivalled knowledge and experience in high pressure laminate �� design possibilities. For more information visit laminex.com.au or call The Laminex Group on 1800 003 988 (within Australia) or 0800 303 606 (within New Zealand).
Page 1 and 2: LAMINEX ® FUSION ® SURFACES
Page 3 and 4: Coffee Table: Laminex Colour Palett
Page 5 and 6: FUSION CUSTOMART
Page 7 and 8: FUSION DESIGN SOURCE
Page 10 and 11: DESIGNER SERIES JULIE PATERSON FD-0
Page 12 and 13: ABSTRACT FD-0027_03 50's Brick 1_3
Page 14 and 15: ABSTRACT FD-0139_01 Circle Sketch 2
Page 16 and 17: ABSTRACT FD-0175_01 Salon_1 FD-0001
Page 18 and 19: 3D FORMS & ILLUSTRATIONS FD-0102 Bo
Page 20 and 21: 3D FORMS & ILLUSTRATIONS FD-0050 Ri
Page 22 and 23: INSPIRED BY NATURE FD-0156_02 Botan
Page 24 and 25: INSPIRED BY NATURE FD-0022 Lush Lot
Page 26 and 27: Laminex Fusion Design Source White
Page 28 and 29: FOOD FD-0128 Pasta FD-0063 Radishes
Page 30: CHILDRENS DESIGNS FD-0113_01 Digi G
Page 33 and 34: FUSION SOLIDS
Page 35 and 36: FUSION WALL MURALS
Page 37 and 38: FW-0001 Coles Bay FW-0002 Mt Borrad
Page 39 and 40: FUSION MATERIAL SELECTOR A range of
Page 41: PROVIDING FILES FOR PRINT Creating

LAMINEX® FUSION®

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?