LAMINEX® FUSION®

TECHNICAL INFORMATION
CHOOSING YOUR LAMINATE GRADE
Laminex ® Fusion ® surfaces offer a range of laminate grades. This means they can be used
for virtually any internal application.
Two sheets sizes are available:
2400mm x 1200mm
3600mm x 1200mm
Please refer to the table for exact sheet size details.
Please note: Pattern direction runs in line with the longest side of the sheet.
FUSION WET AREA PANELLING
Fusion Wet Area Panelling can be used as wall linings in wet or dry areas. It has a melamine
resin surface on both sides for protection against moisture and warpage. It is highly resistant
to scratching and staining, making it ideal for bathrooms, change rooms, toilets, showers,
buses, caravans and boats. For full technical details visit laminex.com.au
Sheet Size (nominal) 2400mm x 1200mm, 3600mm x 1200mm
Thickness (nominal) 2.7mm
Weight (approx) 4.4kg/m2
Surface Finish Glaze or Gloss
Technical Data Fusion Wet Area Panelling conforms with AS/NZS 2924.1, CGS Type
and ISO 4586.1
FUSION STANDARD LAMINATE (XTRA GRADE)
Fusion Xtra Grade is a general purpose laminate for interior applications, including
benchtops, table tops, furniture, wall murals, interior signage and exhibition displays. Its hard
������������������������������������������������������������������������������������������
Grade requires bonding to a suitable substrate prior to installation. For full technical details,
visit laminex.com.au
Sheet Size (nominal) 3600mm x 1200mm
Thickness (nominal)1.0mm
Weight (approx) 1.4kg/m2
Surface Finish Natural or Gloss
Technical Data Fusion Xtra Grade laminate conforms with AS/NZS 2924.1, HGS Type
and ISO 4586.1:199
PATTERN DIRECTION
1200mm
2400mm
1200mm
3600mm