User Manual CONVISION Center
User Manual CONVISION Center User Manual CONVISION Center
General The General tab provides Language options and startup options. Convision Center processes can be configured to start upon starting the PC (the default). This will not start the Convision Center application on PC startup, but will start the background processes which perform actions such as recording. In addition, Convision Center can be configured to be display in full screen mode (Startup in Full Screen) after starting Convision Center. Note: Win7 User Access Control must be disabled for Convision Center to automatically startup after PC startup The Enable Wizard will display the camera setup wizard upon starting Convision Center. 20
User Permission Users can be added, deleted & modified. Users by default have LiveView privileges, and can be assigned privileges to the Setting and Application functionality. Users will/will not have access to the following areas based on the user’s permission configuration. Users require a password, and passwords must be 4-8 characters in length. Login automatically can be enabled to login as a specific user when starting Convision Center. Upon clicking the checkbox, a window is displayed requesting the automatic login’s username & password. This user must correspond to an existing user/password. Convision Center Processes By default Convision Center will start when the PC starts. Convision Center processes are as shown. In the Services, the various services are listed as well as the Startup Type (Automatic or Manual). The startup method can also be changed via the Settings -> System icon. ______________________________________________________________________________________________________________ Convision Systems GmbH • Gablonzstr. 9 • 38114 Braunschweig • www.convision.com • info@convision.com 21
- Page 1 and 2: User Manual CONVISION Center Softwa
- Page 3 and 4: Introduction Convision Center is Ce
- Page 5 and 6: Change the camera name, password if
- Page 7 and 8: Main Console The Main Console provi
- Page 9 and 10: Fix Ratio switches from fix ratio t
- Page 11 and 12: PTZ and Events The PTZ panel provid
- Page 13 and 14: Camera Groups After creating the gr
- Page 15 and 16: Mass IP Assignment Click Next to co
- Page 17 and 18: Recorded files (AVI) can be found i
- Page 19: Access Control Convision Center’s
General<br />
The General tab provides Language options and startup options.<br />
Convision <strong>Center</strong> processes can be configured to start upon starting the PC (the default). This will not start the Convision<br />
<strong>Center</strong> application on PC startup, but will start the background processes which perform actions such as recording.<br />
In addition, Convision <strong>Center</strong> can be configured to be display in full screen mode (Startup in Full Screen) after starting<br />
Convision <strong>Center</strong>.<br />
Note: Win7 <strong>User</strong> Access Control must be disabled for Convision <strong>Center</strong> to automatically startup after PC startup<br />
The Enable Wizard will display the camera setup wizard upon starting Convision <strong>Center</strong>.<br />
20