More documents

Recommendations

Info

QUIC-RELEASE ® Gas Cylinder Bracketspage 5These 12-gauge steel, PVC-coated brackets are tough,durable and corrosion-resistant. Ideal for use inemergency and rescue vehicles, industrial plants andhospitals. Mount to any flat surface.All units comply with AMD Standard 003, foroxygen tank retention systems, and GSA KKKspecification when used as recommended as well asOSHA and insurance safety regulations.Standard Fixed BracketsModel QR-M retains “M” cylinders with 6-3/4” to 7-3/4” O.D.Model QR-GH retains “G” and “H” cylinders with 8-1/4” to9-1/4” O.D.Model QR-M-2 for use with QR-SA slide assembly (see page 6).Patent No. D267,227Reference Manual 3030PM2MODELDESCRIPTIONWT./@IN LBS.QR-GH Bracket for “G” & “H” cylinders †27.1QR-M Bracket for “M” cylinder †19.3QR-M-2 Bracket for “M” cylinder (for useon QR-SA)†18.2Multiversal BracketBracket consists of two separate ends (base and retainer), each 14-3/8” L x 10-1/2” W x 8-5/8” H, plus a center strap bracket. Thebase and retainer ends can be spaced apart to accommodate M,G, H, K and T cylinders. Three heavy-duty web straps hold cylinderssecurely. Straps adjust to cylinder diameters of 6-3/4” to 11”. Forreplacement sraps, see page 9. Can be used alone or with QR-SAslide assembly (see page 6).Reference Manual 3030PM1WT./@MODEL DESCRIPTION IN LBS.QR-MV Multiversal Bracket †17.3†Indicates packaged weight of part.
QUIC-RELEASE ® Gas Cylinder Slides page 6Slide AssemblyIdeal for use under bench or squad seats in ambulance and rescue vehicles.The fast acting latch system allows the cylinder to be pulled partially out forrecharging or all the way out for replacement. The two-part assembly ismade of 12-gauge zinc-plated steel and measures 50” long x 9-1/4” widex 1-1/8” high. For use with either model QR-M-2 or QR-MV brackets.Reference Manual 3030PM13Shown with QR-MVWT./@MODEL DESCRIPTION IN LBS.QR-SA Slide Assembly 27.1Slide Assembly with HingeThe QR-SAFD mounts easily under ambulance bench seats or any otherappropriate horizontal compartment and eliminates the need to raise aheavy cylinder up and over the edge of the cylinder bracket.To switch cylinders, flip the latch and slide the tray out. Release thehinge to drop the top half of the bracket 90 degrees and out of theway. Slide in the new gas cylinder. Once cylinder is secured, lockbracket back into stored position and slide into the compartment.For use with QR-MV cylinder bracket (sold separately).Shown with QR-MVReference Manual 3030PM17WT./@MODEL DESCRIPTIONIN LBS.QR-SAFD Slide Assembly with Hinge 26.75Slide-Out, Flip-Down BracketThe tray mounts under the bench seat. Flip the latch and slide thetray out of the compartment. After the slide clears the cabinetdoor, continue to pull the tray out until it latches, then lower the endof the slide to the ground for easier changing of oxygencylinders.May be used with any of the gas cylinder brackets on page 5(bracket must be ordered separately).Shown with QR-MReference Manual 3030PM6WT./@MODEL DESCRIPTION IN LBS.QR-S<strong>OF</strong>D Slide-Out, Flip-Down Bracket 45.0
Page 2 and 3: page 1TABLE OF CONTENTSDESCRIPTIONQ
Page 4 and 5: QUIC-RELEASE ® “D” Cylinder Br
Page 9 and 10: QUIC-RELEASE ® Oxygen Tank Systems
Page 11 and 12: QUIC-STEP Drop-Down Retractable Ve
Page 13 and 14: QUIC-LADDER Swing Out & Down Vehic
Page 15 and 16: QUIC-STRAP Mounting System - Parts
Page 17 and 18: QUIC-STRAP Utility Mounting System
Page 19 and 20: LOAD & LOCK WALKAWAY ® Bracketspa
Page 21 and 22: WALKAWAY ® Spring Clip Brackets pa
Page 23: Parking Light - Metal Housingpage 2

TABLE OF CONTENTS

Create successful ePaper yourself

Delete template?

Save as template?