SafeCoat Clear - Eagle Specialized Coatings And Protected ...

EAGLESPECIALIZEDCOATINGSANDPROTECTEDENVIRONMENTSA Division of DW Pearce Enterprises Ltd . (1979)TEST RESULTSFLAME SPREAD INDEXSafeCoat ClearRFire Retardant CoatingRESULTS and OBSERVATIONSTesting of SafeCoat Clear Fire Retardant Coatingapplied to a Douglas Fir substrate for compliance withthe applicable requirements of the following criteria:CAN/ULC S102-07; Method of Test for SurfaceBurning Characteristics of Building Materials andAssemblies and ASTM E-84-09; Standard TestMethod for Surface Burning Characteristics ofMaterials. Testing was completed by Intertek TestingServices NA LTD., a certified, independent testinglaboratory.Samples were randomly selected by an Intertekrepresentative at the Quantum Group manufacturingfacility and received at the Intertek Evaluation Center.The subject test specimen is a traceable sampleselected from the manufacturer’s facility. Intertekselected the specimen and verified the composition,manufacturing techniques and quality assuranceprocedures.PRODUCT WARRANTYRecommendations for the use of our products are basedon tests carried out at government approved labs.Manufacturer and seller are not responsible for resultswhere the product is used under conditions beyond ourcontrol. The purchaser of this product must rely on hisown judgement in determining suitability for his purpose,and in applying directions as to handling and use.Quantum makes no warranty, expressed or implied,except that if this product proves on inspection to bedefective, Quantum will replace such quantity of theproduct proven to be defective or refund the purchaseprice of defective product. Labour costs and otherconsequential damages are hereby excluded. Norepresentative or purported agent of Quantum has theauthority to change this warranty. The informationcontained herein is subject to change without notice.If in doubt, contact your Quantum Representative forcurrent Technical Data Sheets (TDS).PRODUCT SAFETYAn MSDS is available from Quantum Group of Companies.*Approximate values only. Should not be considered specifications.This data sheet is intended for general information only.Updated: March, 2011.The samples of SafeCoat Clear applied to a DouglasFir substrate, exhibited the following flame spreadcharacteristics when tested in accordance withCAN/ULC S102-07; Method of Test for SurfaceBurning Characteristics of Building Materials andAssemblies.A series of three test runs of each material was conductedto conform to the requirements of the NationalBuilding Code of Canada.SafeCoat Clear was applied at a rate of 200 sq. ft. pergallon, 8 mils wet, 8 mils dry. It was applied to fingerjointed Douglas Fir wood panels.Sample Material FSR* SDC**SafeCoat Clear 25 200applied to DouglasFir substrate* FSR - Flame Spread Rating**SDC - Smoke Developed ClassificationThe sample of SafeCoat Clear applied to a DouglasFir substrate, exhibited the following flame spreadcharacteristics when tested in accordance withASTM E-84-09; Standard Test Method for SurfaceBurning Characteristics of Materials.One test run of SafeCoat Clear was applied at a rateof 200 sq. ft. per gallon, 8 mils wet, 8 mils dry. It wasapplied to a finger jointed Douglas Fir wood panel.Sample Material FSR* SDC**SafeCoat Clear 15 250applied to DouglasFir substrate* FSR - Flame Spread Rating**SDC - Smoke Developed ClassificationMPI#62Eagle Specialized - Coatings And Protected Enviroments18523 Fraser Hwy, Surrey, BC, CANADA V3S 8E7Tel:Fax:(604) 576 - 2212(604) 576 - 7773