Digital clocks - MOBATIME Swiss Time Systems

Swiss Time SystemsDigital clocksCalendar Clock DKThe DK series calendar clocks displaysimultaneously informationabout time and date. The dateinformation can be displayed inmore than 20 languages.One single display unit can beprogrammed to alternate betweenthree different languages.A lot of synchronization modes andfeatures are available:• autonomous operation with internalquartz, powered by mains• NTP multicast or unicast synchronizationin Ethernet network,powered over PoE or mains• slave clock operation controlledby self-setting MOBALine codemains powered• mains powered slave clockoperation in wireless WTD system,based on a transmitter whichsends the time signal• slave clock operation controlledby built-in Rs 232, Rs 485 orIRIG-B interface, mains powered• single- or double-sided clocks

Swiss Time SystemsThe Clock• display of time values (either12 or 24 hours time cycle),four-digit (HH:MM) or six-digit(HH:MM ss ) format• display of weekday 3 characters,display of month 8 characters• temperature indication (if a temperaturesensor is connected) in°C or °F• possibility of displaying one ortwo temperatures (two temperaturesensors) and description• possibility of alternating displaybetween date and temperature,with adjustable period of displaying• possibility of setting up the timezone, the display can cycle betweenup to five different placesand display actual time andcity nameDisplay Features• digits of 57 mm height, whichcorresponds to readability distanceof 25 m• the letters 30 mm high (36 mmwith special characters)• digits in red or green• digits in blue or yellow (amber)on request• manual or automatic adjustmentof the luminosity of LEDMechanic• Single or double-sided design,wall mounting (only for singlesidedclocks), ceiling suspensionor wall bracket mounting• clock frame made of anodizedaluminum profiles in black or silver,any RAL color on request• easy installation and time savingmaintenance due to theback panel which is designedas a mounting plate on whichthe clock can be snapped onand secured with a screw• structural depth 39/78 mm ofsingle-/double-sided design respectively• anti-glare front side cover, madeof plexiglass, which preventsthe occurrence of reflectionsand improves the readability• protection degree IP 54 optionallyStopwatch• counting upwards from zero,up to 24 hours• counting downwards from aspecified value, with stop atzero, with automatic restart orcounting into negative values• display of intermediate timevalues, “freezing” of display,cumulated intermediate time• counting in steps of 1 minute,1 second or 1/100 seconds• operation via external keyboardor remote control• possibility to connect other displayunitsOperation• setting the clock parameters andtime - date setting by means ofpush buttons, placed on theupper side of the clock frame,or through IR remote control• autonomous quartz time basewith the possibility of synchronizationby means of the DCF 77radio signal• by cascading, several digitalclocks can be synchronizedfrom one DCF or GPSreceiverFor NTP and PoE version only• DHCP / manual configurationof the clock parameter or settingover telnet• DHCP options for automaticconfiguration of all clock parameterswhen connected tonetwork• configuration and monitoringusing MOBA-NMS software orSNMP• firmware update remotelythrough the network using theTFTP protocol• powered by mains with wideinput voltage range 100 - 240VAC, optionally from 24 VDCvoltage or through PoE (IEEE802.3af) with NTP version• NTP and PoE version IPv6readySynchronization types• DCF 77• GPS (DCF, UTC)• MOBALine• NTP (multicast or unicast) overEthernet• WTD (Wireless Time Distribution,868 MHz, NF S87-500)• IRIG-B (SI option)• (un)polarized 24 VDC (minute,half minute and second pulses)• RS 232 (SI option)• RS 485 (SI option)

Swiss Time SystemsOrder reference - DK clocksDK • 1 • 2 • 3 • 4 • 5 • 6 • 7Height of digits 157 mm 57Number of digits 24-digit for time display 46-digit for time display 6Display color 3redgreenVersion 4single-sideddouble-sidedMounting 5wall mountingceiling suspension(conventionally 5, 10, 30 and 50 cm, other lengths on request)wall bracketBSynchronization 6standard version - autonomous / MOBALine / (un)polarized24 VDC impulsesstandard version with built-in Rs 232, Rs 485, IRIG-B interface sIEthernet version, synchronized by NTP, powering 230 VAC NTPEthernet version, synchronized by NTP, powering PoEPoEWTD, wireless synchronizationWTDFrame color 7black (RAL9005)blacksilver (RAL9006)silverframe color on requestRALxxxxOptionpowered by 24 VDCVDCinternal relayRELAccessoriesDCF 77 radio signal receiver DCF 4500GPs receiver GPs 4500temperature sensor, IP 66, cable 3 mTP 3 mtemperature sensor, IP 66, cable 30 mTP 30 mtemperature sensor with Rs 485 interfacepower supply 12 VDCTP Rs485.Mcable between sensor and interface 3 m, for sI version onlytemperature sensor with Ethernet interfacepower supply 5 VDC, cable between sensor and interface 3 m, TP LANfor NTP and PoE version onlyIR remote controlIRexternal keyboard for stopwatch control, cable 5 msKRGNDNssTDDTS master clockSlave DK clock withMOBALine input,mains poweredGPS 4500DCF 4500Slave DK clock withNTP multicast or unicastsynchronization,mains poweredNTPLANTCP/IPMOBA-NMS(Network Management System)Slave clockin wirelessWTD system,mains poweredSlave DK clock withNTP multicast or unicast,synchronization, poweredover Ethernet