AS-Interface cabling system - Schneider Electric

Characteristics,references (continued) 2AS-Interface cabling system 2Dedicated componentsEnclosed D.O.L. startersModel LF7 PCharacteristicsConforming to standards –Degree of protection Conforming to IEC 60529 IP 55Ambient air temperature Operation -10to+40°C211637Operating positionsSame as for the contactorsMaterial Polycarbonate (1)Starters in insulated enclosuresNon-reversing starters with rotary control knob, with red handle on yellow backgroundStandard power ratings of 3-phase motors50/60 Hz in category AC-3Circuit-breakerAdjustment rangeof thermal tripsStarterReferenceWeight220/230 V 400/415 VkW kW A kg– – Without LF7 P00D (2) 1.020– 0.06 0.16…0.25 LF7 P02D 1.3000.06 0.09 0.25…0.40 LF7 P03D 1.30011633LF7 PppD––0.090.120.180.250.120.180.25–0.370.550.40…0.63 LF7 P04D 1.3000.63…1 LF7 P05D 1.3001…1.6 LF7 P06D 1.3500.37 0.75 1.6…2.5 LF7 P07D 1.3500.550.751.11.52.5…4 LF7 P08D 1.3501.1 2.2 4…6.3 LF7 P10D 1.350LF7 PppDA741.5–2.23345.5–6…10 LF7 P14D 1.3509…14 LF7 P16D 1.350Variants (pre-assembled)DescriptionWith HARTING connectors (4)Suffix to be added to thestarter reference (3)A74With local/AS-Interface control (5)A79(1) Avoid allowing the material to come into contact with strong bases (detergents, chlorine solvents, ketones, alcohol, aromatichydrocarbons).(2) Supplied without GV2 P motor circuit-breaker.(3) Example: LF1 P02DA79A74.(4) Connectors to be fitted to cables (to be ordered separately, see page 2/33).(5) LF7 enclosures are fitted, as standard, with connections for 2 sensors (2-wire only).Dimensions :pages 2/34 and 2/35Schemes :pages 2/38 to 2/412/28