AS-Interface cabling system - Schneider Electric
AS-Interface cabling system - Schneider Electric
AS-Interface cabling system - Schneider Electric
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Presentation (continued) 1<strong>AS</strong>-<strong>Interface</strong><strong>cabling</strong> <strong>system</strong> 1Connection of sensors and actuatorsto Advantys <strong>AS</strong>I 67Fp interfaces1Conventional sensors (1) (continued)Limit switchesSensor typesXCMDpZCMDpFunctions possible whenunit is connected on the<strong>AS</strong>-<strong>Interface</strong> cableN/C contactSensorconnectionmethodM12 connector4-pinJumper cables or pre-wiredconnectors (2)M12M1243Compatibility withinterfaces<strong>AS</strong>I 67FpPpppStandard pinarrangementYes (4)<strong>AS</strong>I 67FpPpppYDual (Y) pinarrangementNoXZ CR151p062B212N/C contactM12 connector5-pinM12M124 35XZ CR151p062B21 2N/C contact or N/O contactPre-cabled34Yes (4) Yes (4)XZ CC12MpM40B21XCMpNXCMDpZCMDpN/C + N/O contacts orN/C + N/C contactsPre-cabledXZ CC12MpM40B3241No Yes (3)XCK pD N/C contact M12 connector5-pinM12M12XZ CR151p062B24 351 2Yes (4)NoXCK pP N/C contact M12 connector4-pinM12M12XZ CR151p062B24132XCK pPXCK pDXCK pNXCK TpXCK LpXCK MpXCK JpXCK SpN/C contact or N/O contactTerminalsBKBNXZ CP1541L2 (4 contacts)XZ CP1564L2 (5 contacts)Yes (4) Yes (4)Electromechanical pressure and vacuum switchesXML ppppppS11 N/C + N/O contacts TerminalsBK/WHBKNo Yes (3)BNXZ CP1541L2XZ CP1564L2XML ppppppC11 N/O contact DIN connector DIN 4350A M1245Yes (4) Yes (4)XZ CR1523062K21(1) Check the alternatives for connecting limit switches and pressure/vacuum switches to the splitter boxes. See compatibility table on page 1/37.(2) Length: 2 m. To order a jumper cable or pre-wired connector with a 1 m long cable, replace the last number of the reference (2) by 1.Example: reference XZ CR151p040A2 becomes XZ CR151p040A1 witha1mlongcable.To order a straight input connector, replace the p by the number 1.To order an elbowed input connector, replace the p by the number 2.(3) 2 sensors maximum connected to connectors I1/I2 and I3/I4 of the interface (connectors I2 and I4 must not be used).(4) 1 sensor per M12 input connector on the interface.1/34