AS-Interface cabling system - Schneider Electric

Dimensions 1AS-Interfacecabling system 1Advantys, interfaces for generic productsIP 67 I/O, AS-Interface V2.11Assembled products (direct connection modules)4-channel interfaces with connection base ASI 67FFB01Can be mounted on 35 mm 5 rail.4-channel interfaces with connectionbase ASI 67FFB028-channel interfaces with connection baseASI 67FFB0360= =42457116,5Ø345= =107 515134 40,5807 66(1)4,5(1)724,57 31 7Monobloc products (remote connection modules)4-channel interfaces37,5(1) 2 elongated holes Ø 4.6 x 3. (1) 2 elongated holes Ø 4.6 x 3.8-channel interfaces3 33 330,510,5 33 10,560116,5Ø345= =107 5151= =34 40,5(1)(1)724,54,547,53 33 34010,5 33 10,5(1) 2 elongated holes Ø 4.6 x 3. (1) 2 elongated holes Ø 4.6 x 3.Explanation of LEDs4-channel interfaces8 channel interfaces1 I/O LED1 I/O LED2 341I/O ON:, I/O OFF:2 AS-Interface power On LED (ASI PWR)3 Fault LED4 AUX power On LED (AUX PWR)1234I/O ON: , I/O OF :2 AS-Interface power On LED (ASI PWR)3 Fault LED4 AUX power On LED (AUX PWR)Status ASI PWR Fault AUX PWROffPower off or reversed polarityon the AS-Interface lineOK (1)Power off or reversed polarity on the AUX line(4)ON OK No communication (2) OK (4)Flashing – Peripheral fault (3) –(1) No fault indication if power off or reversed polarity on the AS-Interface line.(2) Master in STOP condition, incorrect IO/ID configuration, Slave at address 0.(3) Sensor supply or output overload, undervoltage or reversed polarity on AUX line, only for ASI 67FpPppD/ASI 67FpPppE.(4) LED not working on ASI 67FpP40pp.Presentation, description :page 1/18Setting-up :pages 1/19 and 1/20Characteristics :pages 1/21 and 1/22References :pages 1/23 to 1/25Schemes, connections :pages 1/27 to 1/301/26