AS-Interface cabling system - Schneider Electric
AS-Interface cabling system - Schneider Electric
AS-Interface cabling system - Schneider Electric
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Characteristics (continued) 1<strong>AS</strong>-<strong>Interface</strong><strong>cabling</strong> <strong>system</strong> 1Advantys, interfaces for generic productsIP 67 I/O, <strong>AS</strong>-<strong>Interface</strong> V2.11Characteristics of V2.1 compatible interfaces<strong>Interface</strong> type <strong>AS</strong>I 67FpP40D <strong>AS</strong>I 67FpP22D <strong>AS</strong>I 67FpP04D <strong>AS</strong>I 67FpP44D/44DY<strong>AS</strong>-<strong>Interface</strong> max. consumption without sensor supply (1) 45 mA 32 mA 19 mA 49 mA<strong>AS</strong>-<strong>Interface</strong> profile (I/O code, ID code, ID1, ID2) 00FE 30FE 80FE 70FE (<strong>AS</strong>I 67FpP44D)7FFE (<strong>AS</strong>I 67FpP44DY)<strong>AS</strong>-<strong>Interface</strong> certifications N° 55001 N° 55101 N° 55201 N° 55301(<strong>AS</strong>I 67FpP44D)pending (P44DY)Maximum number of addresses 31Number of data bits/number of I/O D0 I1 I1 O1 I1 or O1D1 I2 I2 O2 I2 or O2D2 I3 O3 O3 I3 or O3D3 I4 O4 O4 I4 or O4Input or output status data bit value D0 to D3 0 = input On / output Off. 1 = input / output OnOutput fallbackOff in the absence of communicationParameter bitsNot usedProduct status in the event of a peripheral faultThe interface is not inhibited. The peripheral fault bit is On and can be accessed by the master.Peripheral fault informationThe peripheral fault bit is On in the case of: - output overload or short-circuit, - absence ofauxiliary supply, - sensor supply overload (I > 200 mA).The interface is not inhibited.Characteristics of extended A/B addressing interfaces<strong>Interface</strong> type <strong>AS</strong>I 67FpP40E/40EY <strong>AS</strong>I 67FpP22E <strong>AS</strong>I 67FpP03E <strong>AS</strong>I 67FpP43E/43EY<strong>AS</strong>-<strong>Interface</strong> max. consumption without sensor supply (1) 45 mA 32 mA 18 mA 48 mA<strong>AS</strong>-<strong>Interface</strong> profile (I/O code, ID code, ID1, ID2)<strong>AS</strong>-<strong>Interface</strong> certification0A70 (<strong>AS</strong>I 67FpP40E)0A72 (<strong>AS</strong>I 67FpP40EY)n° 55001 (<strong>AS</strong>I 67FpP40E)pending (P40EY)BA70 8A70 7A70 (<strong>AS</strong>I 67FpP43E)7A7E (<strong>AS</strong>I 67FpP43EY)n° 55101 n° 55201 n° 55301 (<strong>AS</strong>I 67FpP43E)pending (P43EY)Maximum number of addresses 62Number of data bits/number of I/O D0 I1 O1 O1 I1 or O1D1 I2 O2 O2 I2 or O2D2 I3 I3 O3 I3 or O3D3 I4 I4 - ∆ (2) I4 ∆ (2)Input or output status data bit value D0 à D3 0 = input or output Off. 1 = input or output OnOutput fallbackOff in the absence of communicationParameter bitsNot usedProduct status in the event of a peripheral faultThe interface is not inhibited. The peripheral fault bit is On and can be accessed by the master.Peripheral fault informationThe peripheral fault bit is On in the case of: output overload or short-circuit, absence of auxiliarysupply, sensor supply overload (I > 200 mA).The interface is not inhibited.Input characteristics (sensor side)Sensor typePNP (2 and 3-wire)Supply voltage To IEC/EN 60947-5-1 V 18…30Maximum sensor supply current(3)Via the <strong>AS</strong>-<strong>Interface</strong>linemA 200 (for an operating temperature < 40 °C). 150 (for an operating temperaturebetween 40 °C and 70 °C). 100 for <strong>AS</strong>I 67FpP22pState 1 guaranteedU>11VandI>6m<strong>AS</strong>tate 0 guaranteedU