GAIL (India) Limited MECON LIMITED

and a certificate of completion given. But in case of worksestimated to cost more than Rs.10,000/-, that CONTRACTOR onsubmitting the bill thereof be entitled to receive a monthly paymentproportionate to the part thereof approved and passed by theENGINEER-IN-CHARGE, whose certificate of such approval andpassing of the sum so payable shall be final and conclusive againstthe CONTRACTOR. This payment will be made after makingnecessary corrections/deductions as stipulated elsewhere in theCONTRACT DOCUMENT for materials, Contract PerformanceSecurity, taxes etc.92.2 Payment due to the CONTRACTOR shall be made by theEMPLOYER by Account Payee cheque forwarding the same toregistered office or the notified office of the CONTRACTOR. In nocase will EMPLOYER be responsible if the cheque is mislaid ormisappropriated by unauthorised person/persons. In all cases, theCONTRACTOR shall present his bill duly pre-receipted on properrevenue stamp payment shall be made in Indian Currency.92.3 In general payment of final bill shall be made to CONTRACTORwithin 60 days of the submission of bill on joint measurements, aftercompletion of all the obligations under the CONTRACT.93 Receipt for payment: 93.1 Receipt for payment made on account of work when executed by afirm, must be signed by a person holding due power of attorney inthis respect on behalf of the CONTRACTOR, except when theCONTRACTOR's are described in their tender as a limitedcompany in which case the receipts must be signed in the name ofthe company by one of its principal officers or by some other personhaving authority to give effectual receipt for the company.94 Completion certificate: 94.1 APPLICATION FOR COMPLETION CERTIFICATE:When the CONTRACTOR fulfils his obligation under Clause 81.1he shall be eligible to apply for COMPLETION CERTIFICATE.The ENGINEER-IN-CHARGE shall normally issue to theCONTRACTOR the COMPLETION CERTIFICATE within onemonth after receiving any application therefore from theCONTRACTOR after verifying from the completion documents andsatisfying himself that the WORK has been completed inaccordance with and as set out in the construction and erectiondrawings, and the CONTRACT DOCUMENTS.The CONTRACTOR, after obtaining the COMPLETIONCERTIFICATE, is eligible to present the final bill for the WORKexecuted by him under the terms of CONTRACT.94.2 COMPLETION CERTIFICATE:Within one month of the completion of the WORK in all respects,the CONTRACTOR shall be furnished with a certificate by theENGINEER-IN-CHARGE of such completion, but no certificate shallbe given nor shall the WORK be deemed to have been executeduntil all scaffolding, surplus materials and rubbish is cleared off theSITE completely nor until the WORK shall have been measured bythe ENGINEER-IN-CHARGE whose measurement shall be bindingand conclusive. The WORKS will not be considered as completeand taken over by the EMPLOYER, until all the temporary works,