Fire Alarm Control Panels - Bosch Security Systems

More documents

Recommendations

Info

82 en | Control Panel Programming Fire Alarm Control PanelsiNotice!If using the B420 models, the DX4020, or the ITS-DX4020-G for reporting events, the ModemIIIa 2 and Contact ID formats are possible:Account NumbersShortcut: 0-PROG, 6-PROG ACC’NTS, 1-PHONE/IP NUMSThe account numbers identify the control panel when it sends reports to the central station.The display scrolls through the Phone or IP Number options. Press [4] for ACCOUNT NUMS.The following window appears:ACCOUNT #1: 0000NEW NUMBER: 0000The existing number is shown on the top line. Enter the new number on the second line andpress [#/Enter]. The previous window appears. Enter hexadecimal digits A through F bypressing [Test] followed by [1] for A, [2] for B, [3] for C, [4] for D, [5] for E and [6] for F.ToneShortcut: 0-PROG, 6-PROG ACC’NTS, 1-PHONE/IP NUMSThe FREQ (_) programming items (refer to window below) modify the reporting format when3/1 or 4/2 tone burst reporting is selected for the format. Select three parameters with onesetting: data tone frequency, acknowledge tone frequency, and data rate. The frequency thatthe control panel uses to send data pulses can be set for 1900 Hz (19D) or 1800 Hz (18D).The frequency of the acknowledge tone from the receiver to which control panel responds canbe set to 1400 Hz (14A) or 2300 Hz (23A). The rate at which the data pulses are sent can beset to 10, 20, or 40 pulses per second (10PS, 20PS or 40PS).The display scrolls through the Phone/IP Number options (refer to 52). Press [5] for TONE.The following window appears:FREQ (__)1- 19D, 14A, 10PS2- 18D, 23A, 10PS3- 19D, 14A, 20PS4- 18D, 23A, 20PS5- 19D, 14A, 40PS6- 18D, 23A, 40PSPress the number key that corresponds to your selection. The previous window appears.8.6.2Phone ControlShortcut: 0-PROG, 6-PROG ACC’NTS, 2-PHONE CONTROLIn addition to features associated with each phone and IP number, each phone line hasassociated features.PHONE CONTROL1- LINE #12- LINE #2Press the number key that corresponds with your selection. Line 1 and Line 2 have the sameoptions. The following window appears:2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.
Fire Alarm Control Panels Control Panel Programming | en 83PHONE CONTROL #11- MONITOR LINE2- DIALING TYPEFor explanations of the phone control options, see the following sections for Monitor Line andDialing Type.Monitor LineShortcut: 0-PROG, 6-PROG ACC’NTS, 2-PHONE CONTROLThe phone line monitor feature, that supervises the connection of the phone line to thecontrol panel, can be disabled for each phone line. If an IP address is entered for the Phone/IP number, set the monitor to No. If this is not programmed to No, a trouble is generated.Choose Line 1 or Line 2 (see the window above). The display scrolls through the PhoneControl options. Press [1] for MONITOR LINE. The following window appears:MONITOR LINE #1_______: YES (1) NO (0)For acceptable programming selections for UL864 9 th edition Listed applications, seeProgramming features for UL864, 49.Press [1] for YES or [0/Prog] for NO. The previous window appears.Dialing TypeShortcut: 0-PROG, 6-PROG ACC’NTS, 2-PHONE CONTROLThis feature determines the format the control panel uses for dialing on each phone line. TheTONE/PULSE setting first tries tone dialing. If that fails, it switches to pulse dialing. If an IPaddress is entered in for the Phone/IP number, the control panel ignores this setting.Choose Line 1 or Line 2 (see the window below). The display scrolls through the PhoneControl options. Press [2] for DIALING TYPE. The following window appears:PHONE CONTRO (__)1- PULSE ONLY2- TONE/PULSE3- TONE ONLYPress the number key that corresponds to your selection. The previous window appears.8.6.3Report SteeringShortcut: 0-PROG, 6-PROG ACC’NTS, 3-RPT STEERINGDifferent classes of reports can be directed to different phone numbers. Non-supervisoryalarms include fire alarms and waterflow alarms. Supervisory alarms come from pointsconfigured as a supervisory type. Non-supervisory restorals include fire and waterflowrestorals. Supervisory restorals come only from points configured as a supervisory type.Trouble reports include all point and system troubles and restorals. Tests include Auto Tests,Manual Tests and Off-normal at Test Reports. The control panel allows the special reportsSilence, Reset, and Drill to be individually directed.Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458
Page 6:
MethodenberichtBerliner pairfam Stu
Page 14 and 15:
14 en | Overview Fire Alarm Control
Page 17 and 18:
Fire Alarm Control Panels Overview
Page 19 and 20:
Fire Alarm Control Panels Overview
Page 22 and 23:
22 en | Installation Fire Alarm Con
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
30 en | Connection Fire Alarm Contr
Page 32 and 33: 32 en | Connection Fire Alarm Contr
Page 34 and 35: 34 en | Connection Fire Alarm Contr
Page 36 and 37: 36 en | System Operation Fire Alarm
Page 50 and 51: 50 en | Programming Fire Alarm Cont
Page 60 and 61: 60 en | Control Panel Programming F
Page 98 and 99: 98 en | Specifications Fire Alarm C
Page 101 and 102: Fire Alarm Control Panels Appendice
Page 107: Fire Alarm Control Panels Appendice
Page 110 and 111: 110 en | Appendices Fire Alarm Cont
Page 122: Bosch Security Systems, Inc.130 Per
show all

Fire Alarm Control Panels - Bosch Security Systems

Create successful ePaper yourself

Delete template?

Save as template?