11.07.2015 Views

Fire Alarm Control Panels - Bosch Security Systems

Fire Alarm Control Panels - Bosch Security Systems

Fire Alarm Control Panels - Bosch Security Systems

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Fire</strong> <strong>Alarm</strong> <strong>Control</strong> <strong>Panels</strong> <strong>Control</strong> Panel Programming | en 79Several keys assist when you enter phone or IP numbers. For these keys, see the followingtable:Press[SILENCE][DISABLE][RESET]ActionAdvance to next positionGo back one positionClear positionTable 8.4: Phone number assistance keysiNotice!For a phone number, you must enter 1 as a prefix before the special character >. Except forunusual situations, all phone numbers should have the wait for dial tone character as the seconddigit. This ensures that reports are delivered as quickly as possible, even if an incomingphone call must be disconnected. For example, you would program 1>18002890096 for thephone number 1 800-289-0096.If the wait for dial tone is not specified, the control panel waits 7 sec after going off-hook,and then dials whether or not the dial tone is present.To enter a central station IP address in either phone number 1 or 2 in the control panel,replace all three phone numbers with an IP address. To distinguish an IP address from aphone number, enter 0 as the first digit, followed by the 12 digit IP address.iNotice!The IP address must be 12 digits long.For example, if the IP address is 172.30.1.101, thephone number is programmed as 0 172 030 001 101. Do not add the spaces. They are includedfor readability.For programming an IP address and bit locations, see the following table:Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 Digit 6 Digit 7 Digit 80 = Alt.Comm.OnIP1 IP2 IP3 IP4 IP5 IP6 IP7Digit 9 Digit 10 Digit 11 Digit 12 Digit 13 Digit 14 Digit 15 Digit 16IP8 IP9 IP10 IP11 IP12 Ack WaitN2Ack WaitN1Ack WaitN0Digit 17 Digit 18 Digit 19 Digit 20 Digit 21 Digit 22 Digit 23 Digit 24HBintervalN2HBintervalN1HBintervalN01 = Anti-Replay On0 unused 0 unused 0 unused 0 unusedTable 8.5: IP address digit or bit locationAcknowledge Wait Time (ACK) – Digits 14 to 16, Default: 010The alternate communication event, transmission acknowledge wait time, is stored in thephone number location as digits 14, 15 and 16. The wait time is a number from 1 to 255seconds where the most significant or first digit is D14.<strong>Bosch</strong> <strong>Security</strong> System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!