Fire Alarm Control Panels - Bosch Security Systems

More documents

Recommendations

Info

60 en | Control Panel Programming Fire Alarm Control PanelsAUTOMATIC TEST1-TEST TIME2-TEST FREQNCYPress [1] to select Test Time. The following window appears:AUTO TEST TIMEHHMM: _______Enter the time followed by the [#/Enter] key.Test FrequencyShortcut: 0-PROG, 1-PROG TIME, 2-AUTO TESTThis feature allows you to program how often the automatic test reports are sent. The firsttest is sent when the programmed test time matches the system time. Subsequent reports aresent according to the selected interval.The following window appears:AUTOMATIC TEST1-TEST TIME2-TEST FREQNCYPress [2] to select Test Frequency.The following window appears:AUTO FRQNCY ( )1-4 HOURS2-12 HOURS3-24 HOURS4-7 DAYS*5-28 DAYS** For acceptable programming selections for UL864 9 th edition Listed applications, seeProgramming features for UL864, 49.Press the number key that corresponds to your selection. The existing setting is displayed inparentheses on the first line. After you have programmed the test frequency, the previouswindow appears.8.1.3Daylight saving timeShortcut: 0-PROG, 1-PROG TIME, 3-DAYLIGHT SAVThis feature enables automatic adjustment of system time for Daylight Saving Time. The datesfor the adjustment are pre-programmed in the system.The following window appears:DAYLIGHT SAV1-DISABLE2-ENABLEPress [1] to select DISABLE or [2] to select ENABLE. After you have programmed this feature,the previous window appears.8.2SECURITYSECURITY1-PINS2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.
Fire Alarm Control Panels Control Panel Programming | en 612-AUTHORITY8.2.1Personal Identification Numbers (PINs)Programmer PINShortcut: 0-PROG, 2-SECURITY, 1-PINSThe Programmer PIN is the code used by the installer to configure and operate the panel.Factory default code is 9876 and may be changed at any time.The following window appears:PROGRAM PINS1-PROGRAMR PIN2-USER PINSPress [1] for Programmer PIN. The following window appears:USER 0ENTER PIN:_______Enter the PIN and press [#/Enter]. After you have programmed the Programmer PIN, theprevious window appears.Program User PINsShortcut: 0-PROG, 2-SECURITY, 1-PINSUp to 15 additional user codes (or up to 99 additional users when the D7039 is installed) canbe programmed to protect the system from unauthorized operation and allow a record to bekept of actions by individual system users.The following window appears:PROGRAM PINS1 - PROGRAMR PIN2 - USER PINSPress [2] for user PINs. The following window appears:OTHER PINSUSER (01-15)Enter the user for whom you want to program a PIN and press [#/Enter]. Example: For User 5,press [5]. The following window appears:USER 5ENTER PIN:_______Enter the PIN and press [#/Enter]. After you have programmed the user PIN, the previouswindow appears.8.2.2AuthorityShortcut: 0-PROG, 2-SECURITY, 2-AUTHORITYThis feature determines which system actions a user can perform.For PIN authority levels, see the following table:Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458
Page 6:
MethodenberichtBerliner pairfam Stu
Page 14 and 15: 14 en | Overview Fire Alarm Control
Page 17 and 18: Fire Alarm Control Panels Overview
Page 19 and 20: Fire Alarm Control Panels Overview
Page 22 and 23: 22 en | Installation Fire Alarm Con
Page 30 and 31: 30 en | Connection Fire Alarm Contr
Page 36 and 37: 36 en | System Operation Fire Alarm
Page 50 and 51: 50 en | Programming Fire Alarm Cont
Page 62 and 63: 62 en | Control Panel Programming F
Page 98 and 99: 98 en | Specifications Fire Alarm C
Page 101 and 102: Fire Alarm Control Panels Appendice
Page 107: Fire Alarm Control Panels Appendice
Page 110 and 111:
110 en | Appendices Fire Alarm Cont
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 122:
Bosch Security Systems, Inc.130 Per
show all

Fire Alarm Control Panels - Bosch Security Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?