Rapid Wall Breaching Kit (RWBK) - Ensign-Bickford Aerospace ...

EX-2008090138Fuzes, Detonating, UN01061.1BRapid Wall Breaching Kit (RWBK)SPECIFICATIONS:RWBK, TACTICAL(PART NUMBER- E100025-3)Explosive Breaching ChargeCharge BagSilhouetteRebar Cutter AssemblyDetonator Assembly, M14/M18Shock TubeDual “Minitube” Detonator AssemblyBunch BlockSun, Wind, Dust GogglesUltrafit Earplug without CordProp-Stick AssemblyInstruction SheetSYSTEM DESCRIPTIONDeveloped from ACE charge and outfitted with an SOB ® and PRIMACORD ® lead for easy primingContains entire system for easy carrying and deploymentCharge support for easy, reliable charge placement against the targetSecondary rebar removal toolTimed detonationCommand detonationPRIMACORD ® connector for M14/M18 detonatorsEye protectionHearing protectionProvides positive positioning of the silhouette against the target on all terrainsIllustrated instruction sheet providing easy to follow directionsOperation:The user should remove and separate the contents ofthe carry bag, then unfold the charge supporting thesilhouette. The foam-encased breaching charge attachesto the silhouette using provided hook and loop straps.Once the silhouette and charge are assembled, aninitiation method can be chosen. When ready to move totarget, the user can fold the silhouette/charge assemblyin half for a more convenient transport. The foldedsilhouette, detonator assembly and prop stick can becarried to the target. The silhouette can be placed againstthe target with the charge on opposite side of silhouettefrom the target. The prop stick can be inserted intosilhouette and should be adjusted for proper height.One detonator can be attached to each PRIMACORD ®Detonating Cord lead on charge. The user can fire bypulling the ring on each firing device simultaneously(IAW accepted operational SOPs). If necessary, theincluded rebar cutter assembly can be used tocut any remaining rebar.DeployedPost FunctionENSIGN-BICKFORD AEROSPACE & DEFENSE COMPANY640 HOPMEADOW STREET, P.O. BOX 429, SIMSBURY, CT 06070, USA www.EBA-D.comENSIGN-BICKFORD AEROSPACE & DEFENSE COMPANYSOB® is a registered trademark of EBA&D. ACE is a trademark of EBA&D. PRIMACORD® is a registered trademark of Dyno Nobel Inc.640 HOPMEADOW STREET, P.O. BOX 429, SIMSBURY, CT 06070, USA www.EBA-D.comAttention: The information and recommendations described in this brochure cannot possibly cover every application of the products or variation of conditions under which the products are used.The recommendations Attention: The herein information are based and on recommendations the manufacturer’s described experience, in this research brochure and cannot testing. possibly They are cover believed every to application be accurate, of the but products no warranties or variation are made, of conditions express or under implied. which In addition, the products the specificationsare used. Thecontained herein recommendations are all nominal herein which are represent based on our the current manufacturer’s production. experience, The products research described and testing. may be They subject are believed to change. to Please be accurate, feel free but to no contact warranties Ensign-Bickford are made, express Aerospace or implied. & Defense In addition, Company the for specifications verification.No Warranties contained or Liabilities: herein The are products all nominal described which represent herein our are current sold “AS production. IS” and without The products any warranty described or guaranty, may be subject express, to or change. implied, Please arising feel by free law to or contact otherwise Ensign-Bickford including without Aerospace limitation & Defense any warranty Company of merchantabilityfor verification.or fitness No Warranties for a particular or Liabilities: purpose. The Buyer products and user described agree further herein to release are sold and “AS discharge IS” and seller without from any any warranty and all or liabilities guaranty, whatsoever express, or arising implied, out arising of the by purchase law or otherwise or use of any including product without described limitation herein any whether warranty or not of merchantabilitysuch liability isor fitness for occasioned a particular by purpose. seller’s Buyer negligence and user or based agrees upon further strict to products release and liability discharge or upon seller principles from any of and indemnity all liabilities or contribution. whatsoever Content©2012 arising out of the Ensign-Bickford purchase use Aerospace of any product & Defense described Company, herein whether Simsbury, or not CT such 06070, liability U.S.A. isoccasioned by seller’s negligence or based upon strict products liability or upon principles of indemnity or contribution. Content©2011 Ensign-Bickford Aerospace & Defense Company, Simsbury, CT 06070, U.S.ACleared for Open Publication by the Office of Security Review, Department of Defense 05/25/2012 12-S-2160