W cast iron motors - Brook Crompton

W cast iron motorsFrame sizes 80 to 35520113E issue 2.4

Specification and Introduction2Cast Iron SpecificationSpecificationFrame sizesEnclosureMounting optionTerminal box positionVoltageFrequencyCoolingBearing locationLubricationInsulationTemperature risePaint colourFan coverThermal protectionAnti condensation heatersDrain holesInverter Duty (with derate)Ambient temperatureAC & DC brake optionStandard product80 - 355IP55Foot (B3), Flange (B5), Face (B14) or Pad (B30)Top, (80 frame right hand side)3 kW and below: 230 / 4004 kW and above: 400 / 69050 HzIC411Drive end80 - 180 double-shielded bearings200 - 355 regreasing facilityclass Fclass Bwater blue (RAL 5021)Steel200 - 355 (by thermistors)-160 - 355Variable Torque: 10:1Constant Torque: 2:1-20°C to + 40°C-OptionIP56, IP65, IP66Foot & Flange (B35), Foot & Face (B34)Right hand side, left hand side--60 HzIC410, IC416 & IC418Non drive endRegreasing facility-class Hclass Fon requestPlastic (80 - 180)80 - 18080 - 35580 - 132-Alternative speed range-50°C to +100°C80 - 355The above specification and options give a brief summary of features available for the W cast iron range.For a full listing of optional features, please contact Brook Crompton sales.Brook CromptonBrook Crompton is a leading supplier ofelectric motors for the global industrial market,with motor solutions which benefit a wide range ofcustomers.Our products are used in almost every industrialactivity including water treatment, buildingservices, chemical/petrochemicals, generalprocessing and manufacturing where they drivefans, pumps, compressors and conveyors, amongstother things.Brook Crompton incorporates many well knownnames including Brook Motors, Crompton Parkinson,Electrodrives, Newman, Bull Electric andHawker Siddeley Electric Motors.We have extensive stocks of motors, backed-up bya network of distributors, ensuring excellent localsupport wherever needed.Quality assuranceStringent quality procedures are observed fromfirst design to finished product in accordance withthe ISO9001 quality systems.All of our factories have been assessed to meetthese requirements, a further assurance that onlythe highest standards of quality areaccepted.W cast iron rangeThe Brook Crompton W motor range coversproducts with outputs from as little as 0.18kW to400kW in frame sizes 80 to 355L. They are suitablefor use within a diverse range of applications fromfood and drink to china clay production. Fromroller table drives to refrigeration. Manyapplications often have adverse operatingconditions including repeated starting andoccasional overloading; the ‘W’ range is well suitedto these situations. A virtual ‘go anywhere’ motor,this cast iron range has a full 3-year guarantee.Benefits include:• high efficiency for low running costs• high reliability for long life• low noise levels• cool running for long insulation life• Eurovoltage: 400V ±10%• high torque with smooth acceleration andlow current• ease of maintenance• IP55 protection• 4-position cable entry• multi-mount for adaptability• also available for Zone 2, Zone 21 & 21 seecatalogue 2204E for further detailsEfficiencyBrook Crompton are an approved manufacturer ofac electric motors within the UK GovernmentsEnhanced Capital Allowance scheme. A wide rangeof single speed motors are included on thetechnology list.Please check the ECA scheme website:www.eca.gov.uk at time of purchase for currentlisting.

Standards and environmentStandards3StandardsMotors of cast iron construction can be manufactured to the international standards listed below:RangeInternational UKEuropeEnvironment EnclosureAll motors have degrees of IP protection as defined inIEC EN 60034-5. The normal arrangement is IP55.See Specification (page 2) for alternatives.StandardOutputsPerformanceDimensionsIECIEC 60034-1IEC 60034-1IEC 60072-1BS, EN & IECBS EN 50347:2001BS EN 50347:2001BS EN 60034-30BS EN 50347BS 4999 part 141EN & IECEN 50347EN 60034-1EN 50347Motor coolingMotors are cooled in accordance with IEC 60034-6. The normalarrangement is IC411 (Totally Enclosed Fan Ventilated) via a fanmounted at the non-drive end.See Specification (page 2) for alternatives.MountingIEC 60034-7BS EN 60034-7EN 60034-7Degrees ofprotectionIEC 60034-5BS EN 60034-5EN 60034-5Motors complying with IEC 60034-1 also comply with many of the national standards of otherEuropean countries, eg CEI 203 (Italy), NBN7 (Belgium), NEN 3173 (Netherlands), SEN 2601 01(Sweden)European directivesThe following European directives apply:DirectivesCompliance with European directives applying to AC induction motorsDirectivesLow voltage(LV)Machinery(MD)Electromagnetic compatibility(EMC)Energy using products(EuP)Reference numbersMotor CE markedStandardsDocumentation for customers’ technical fileSafety instructions with every motorComment73/23/EEC93/68/EEC2006/95/ECYesEN 60034Declaration of conformityYesRelevant electricalequipment operatingbetween50 to 1000 volts AC89/392/EEC93/44/EEC98/37/EC98/79/EC2006/42/ECNoNot applicableCertificate of incorporationYesStatement (2)89/336/EEC92/31/EEC93/68/EEC2004/108/ECNoEN 60034-1Statement (1)YesComponent92/42/EEC96/57/EC2000/55/EC2005/32/ECYesEN 60034-30Declaration of conformity-Minimum efficiency levelsfor motor outputs0.75 - 375kW2-6 pole(1) Motors operating from a correctly applied, sinusoidal (AC) supply meet the requirements of the EMC directive and are within the limits specified in standard EN 60034-1(2) When installed in accordance with our customer safety and installation and maintenance instructions, they can be put into service only when the machinery into which theyare being incorporated, has been declared to be in conformity with the machinery directive in accordance with Article 4(2) and Annex IIB of that Directive (98/37/EEC)Minimum Energy Performance StandardThe new standardThe EU MEPS scheme sets new mandatoryminimum efficiency levels for most single speed3ph induction motors up to 375kW rated up to1000V, unlike the narrow definition of the CEMEPvoluntary scheme which only covered a smallnumber of standard motors.The Voluntary Agreement, since 1998, of CEMEPfor motor manufactures has expired(classes EFF3 /EFF2/EFF1).The new standard for motors is now mandatoryregulation in Europe.The scope of EU MEPS covers 2, 4 & 6 pole singlespeed 3ph induction motors from 0.75 to 375kW,rated up to 1000V based on continuous dutyoperation.Aiming to reduce energy consumption throughoutEurope and the rest of the world, it comes into effectin 3 stages . The effect of this is to maximisepotential savings in electric motor driven systems.Base of the regulation is a new international IEC60034-30 standard. It defines the followingefficiency classes :IE1 - Standard Efficiency (comparable to EFF2)IE2 - High Efficiency (comparable to EFF1 and USAEPACT 60 Hz)IE3 - Premium Efficiency (comparable to USA“NEMA Premium” 60 Hz)New Efficiency levels in Europe (Time Line)Mandatory from:Since 16 June 2011:Minimum efficiency requirement at IE2 for allmotors covered 0.75 - 375kWFrom 1 January 2015:Minimum efficiency requirement at IE3 level for7.5 - 375kW motors or IE2 level for motorsequipped with an appropriate variable speed drive.From 1 January 2017:Minimum efficiency requirement at IE3 level for0.75 - 375kW motors or IE2 level for motorsequipped with an appropriate variable speed drive.

Performance data43000 min -1 (2 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)0.75(1.0)1.1(1.5)1.5(2.0)2.2(3.0)3.0(4.0)4.0(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)55(75)nmin –12890288528802895288028952930293029452940295529502950294529602955TypeWP-DF80MM (1)WP-DF80MS (1)WP-DF90LMX (1)WP-DF90LSX (1)WP-DF100LMF (1)WP-DF112MR (1)WP-DF132SGX (1)WP-DF132SMX (1)WP-DF160MJ (1)WP-DF160MR (1)WP-DF160LT (1)WP-DF180MF (1)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF225MP (2)WP-DF225MP (3)WP-UDF250MNE (2)WP-DF250SN (3)IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3230 VA2.73.955.257.99.3-----------I N400 VA1.552.303.004.65.37.310.613.719.626.032.538.153.065.077.092690 VA-----4.26.17.911.315.018.822.130.537.544.553η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm80.7 0.86{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }81.077.083.584.883.584.284.582.085.985.984.287.188.788.788.589.288.590.590.588.891.091.290.392.292.591.593.093.393.193.393.492.593.693.693.193.393.393.093.793.793.394.394.393.394.694.694.50.800.680.840.780.660.860.810.700.810.730.590.930.900.840.900.850.740.830.760.630.870.810.700.880.850.770.900.870.790.880.840.750.890.850.770.880.850.780.880.850.780.900.880.830.920.910.862.53.65.07.31013.217.924.535.748.759.871.397.2120145178M AM N3.33.53.43.83.03.93.93.63.62.22.72.42.82.72.32.3I AIN7.77.78.28.58.210109.67.68.69.09.59.07.87.87.8M K M SM N M N3.1 2.53.13.64.13.34.84.84.33.63.74.04.03.02.92.82.82.82.83.62.83.83.63.31.81.92.22.12.42.31.91.9M AM NY–––––1.21.21.11.10.70.840.750.880.750.650.72I AI NY–––––3.13.13.02.42.72.83.02.82.52.52.5M SM NY–––––1.21.11.00.60.60.70.660.750.600.500.50Jkgm 20.00130.00120.00140.00160.00580.00640.0150.0180.0450.0560.0630.0890.150.180.380.56L PAdB(A)64646464606066666868686873737575(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data63000 min -1 (2 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)355(475)375(503)nmin –129602960298029752980298029752980298529802980298529852985TypeWP-UDF280SNE (2)WP-DF250MN (3)WP-UDF280MNE (2)WP-DF280SN (3)WP-UDF315SNE (2)WP-DF280MN (3)WP-UDF315MNE (2)WP-DF315SN (3)WP-UDF315MN (2)WP-DF315MN (3)WP-UDF315MP (2)WP-DF315MP (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF315LP (2)WP-DF315LP (3)WP-UDF355SG (2)WP-DF355SG (3)WP-UDF355SJ (2)WP-DF355SJ (3)WP-UDF355SN (1)WP-DF355SN (3)WP-UDF355MJ (2)WP-DF355MJ (3)WP-UDF355MN (2)WP-DF355MN (3)WP-UDF355LN (2)WP-DF355LN (3)IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3400 VA127150183222249265304328381419474533600621I N690 VA7387106129144154176190221243275309348360η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm95.0 0.90{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }95.195.095.595.595.395.295.295.295.495.594.895.595.394.195.695.594.595.795.795.095.895.895.395.895.495.495.895.293.895.895.394.295.895.895.095.895.895.095.895.895.30.870.830.910.880.820.910.890.840.900.890.850.910.890.840.910.890.830.920.890.850.920.900.860.890.860.820.900.860.810.890.880.840.890.880.850.890.880.850.910.900.85242291353424481513594641720802898100811361120M AM N2.22.22.22.22.02.02.02.12.02.02.02.02.02.6I AIN7.87.87.87.87.87.87.87.97.57.57.57.57.57.3M K M SM N M N3.0 2.03.02.92.92.82.82.82.92.72.72.72.72.73.22.01.81.81.71.71.71.61.61.61.61.61.62.0M AM NY0.650.650.650.650.600.600.600.660.630.630.630.650.650.8I AI NY2.52.52.52.52.52.52.52.52.42.42.42.32.32.28M SM NY0.500.500.450.450.450.450.450.90.90.90.90.450.450.63Jkgm 20.70.81.41.72.42.62.82.235.05.35.96.37.08.0L PAdB(A)7777787880808080808080808080(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data3000 min -1 (2 pole)7Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)355(475)375(503)nmin –129602960298029752980298029752980298529802985298529852980TypeWU-DF280SNE (2)W-DF250MN (3)WU-DF280MNE (2)W-DF280SN (3)WU-DF315SNE (2)W-DF280MN (3)WU-DF315MNE (2)W-DF315SN (3)WU-DF315MN (2)W-DF315MN (3)WU-DF315MP (2)W-DF315MP (3)WU-DF315LN (2)W-DF315LN (3)WU-DF315LN (2)W-DF315LN (3)WU-DF355SG (2)W-DF355SG (3)WU-DF355SJ (2)W-DF355SJ (3)WU-DF355SN (1)W-DF355SN (3)WU-DF355MJ (2)W-DF355MJ (3)WU-DF355MN (2)W-DF355MN (3)WU-DF355LN (2)W-DF355LN (3)IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2400 VA128152185224251268306330384427478532599663I N690 VA7488107130146155177191223247277308347367η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm93.8 0.90{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }95.194.394.195.294.794.394.893.794.696.395.994.795.494.594.896.095.195.095.594.695.096.095.095.095.594.495.095.694.695.095.864.895.096.295.495.096.095.595.095.495.10.910.900.910.890.830.910.900.850.900.910.880.910.880.830.910.880.830.920.900.860.920.910.870.890.860.810.890.870.810.910.870.820.900.930.840.900.880.830.900.900.86242290353423481513593641720801896100711361200M AM N2.22.22.22.22.02.02.02.12.02.02.02.72.82.6I AIN7.87.87.87.87.87.87.87.97.57.57.58.38.47.3M K M SM N M N3.0 2.03.02.92.92.82.82.82.52.72.72.72.72.72.72.01.81.81.71.71.71.61.61.61.61.61.61.6M AM NY0.650.650.650.650.600.600.600.650.650.650.650.840.880.8I AI NY2.52.52.52.52.52.52.52.52.32.32.32.62.62.3M SM NY0.500.500.450.450.450.450.450.420.450.450.450.450.450.45Jkgm 20.70.81.41.72.42.62.82.85.05.35.96.37.08.0L PAdB(A)7777787880808080808080808080(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data81500 min -1 (4 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)0.75(1.0)1.1(1.5)1.5(2.0)2.2(3.0)3.0(4.0)4.0(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)55(75)nmin –1-143014401450146014501460145014751475147514701470147514801480TypetbcWP-DF90LTX (1)WP-DF90LWX (1)WP-DF100LRF (1)WP-DF100LTF (1)WP-DF112MWX (1)WP-DF132STX (1)WP-DF132MVX (1)WP-DF160MR 1)WP-DF160LU (1)WP-DF180ME (1)WP-DF180LM (1)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF225SR (2)WP-DF225SR (3)WP-UDF225MN (2)WP-DF225MN (3)WP-UDF250MPE (2)WP-DF250SP (3)IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3230 VA-4.26.38.111.6-----------I N400 VA-2.53.64.66.78.410.914.620.928.134.741.154.064.580.095.5690VA-----4.86.38.512.116.320.123.831.037.54656η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm- -{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }--84.184.484.085.385.383.286.787.086.087.787.785.888.688.688.089.690.088.790.491.390.492.592.892.092.893.092.392.692.892.093.093.093.093.693.693.093.993.993.094.294.393.594.694.894.2--0.770.700.570.700.580.460.790.700.570.740.630.500.780.700.560.810.730.600.820.730.600.820.750.620.830.760.620.830.740.600.830.750.620.860.830.750.880.820.740.860.840.750.880.840.76-7.310.014.519.626.436.049.471.397.2120143195240291355M AM N-3.04.23.33.73.53.33.23.03.22.83.12.32.72.72.7I AIN-7.07.47.38.18.08.77.69.09.18.48.87.58.47.78.3M K M SM N M N- -3.54.73.33.83.53.93.43.73.53.03.03.22.93.22.92.74.13.03.22.92.72.62.42.42.02.01.92.11.92.2M AM NY---––1.11.01.00.941.00.880.950.70.840.750.84I AI NY---––2.52.72.42.82.842.62.752.42.62.52.6M SM NY---––0.90.840.80.750.750.630.630.550.660.550.7Jkgm 2-0.00370.00420.01070.01180.01510.030.0330.0840.0980.160.170.310.420.500.66L PAdB(A)-484854545459596363626265666767(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data1500 min -1 (4 pole)9Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)0.55(0.75)0.75(1.0)1.1(1.5)1.5(2.0)2.2(3.0)3.0(4.0)4.0(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)55(75)nmin –114101440142514401435145514401460146014651460147014701470147514801475TypeWU-DF80ME (1)WU-DF80MS (1)WU-DF90LRX (1)WU-DF90LWX (1)WU-DF100LS (1)WU-DF100LTF (1)WU-DF112MT (1)WU-DF132STX (1)WU-DF132MVX (1)WU-DF160MJ (1)WU-DF160LR (1)WU-DF180ME (1)WU-DF180LJ (1)WU-DF200LNX (2)W-DF200LNX (3)WU-DF225SN (2)W-DF225SN (3)WU-DF225MN (2)W-DF225MN (3)WU-DF250MNE (2)W-DF250SN (3)IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2230 VA-3.34.46.58.911.9-----------I N400 VA1.691.92.53.75.16.88.711.114.721.028.035.041.055668198690VA------5.06.48.512.116.220.223.732384757η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm77.0 0.84{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }77.073.079.678.877.481.481.582.082.883.081.084.383.681.485.583.582.686.686.685.987.788.087.288.789.488.689.891.090.490.691.891.691.291.890.791.692.191.692.393.192.692.793.292.593.193.193.193.592.892.20.770.650.720.620.490.770.780.580.700.580.460.740.660.530.740.630.500.770.690.550.820.740.630.830.760.670.830.780.670.850.810.710.840.770.660.860.830.710.860.830.740.870.830.740.860.860.790.870.810.762.55.07.49.914.619.726.536.049.171.798.1120143195240291356M AM N2.23.82.34.23.13.93.03.33.22.52.52.82.52.32.32.72.7I AIN5.56.85.27.46.68.57.48.77.67.77.78.47.57.57.37.77.7M K M SM N M N2.5 2.03.82.94.73.14.03.13.93.42.92.93.22.93.23.23.23.21.82.33.62.62.82.62.32.52.02.02.22.01.91.91.91.9M AM NY––––––-–-0.650.650.800.780.70.70.750.75I AI NY––––––-–-2.32.32.62.32.42.32.52.5M SM NY––––––-–-0.500.500.650.600.550.550.550.55Jkgm 20.00140.00190.00340.00420.01030.01180.0120.030.0330.0680.0840.160.190.310.450.650.75L PAdB(A)4747484854545659596363626265666767(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data101500 min -1 (4 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp).75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)355(475)375(430)nmin –114801480148514851490149014901490149014851490149014901490TypeWP-UDF280SNE (2)WP-DF250MN (3)WP-UF280MNE (2)WP-DF280SN (3)WP-UDF315SNE (2)WP-DF280MN (3)WP-UF315MNE (2)WP-DF315SN (3)WP-UDF315MN (2)WP-DF315MN (3)WP-UDF315MP (2)WP-DF315MP (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF355SG (2)WP-DF355SG (3)WP-UDF355SJ (2)WP-DF355SJ (3)WP-UDF355SN (2)WP-DF355SN (3)WP-UDF355MJ (2)WP-DF355MJ (3)WP-UDF355MN (2)WP-DF355MN (3)WP-UDF355LN (2)WP-DF355LN (3)IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3400 VA134158191229254268309334383427478538600635I N690 VA7892111133147155179194222248277312348367η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm95.0 0.85{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }95.195.095.295.295.095.895.895.395.695.695.596.096.195.596.096.095.996.096.095.996.096.095.996.496.496.096.096.095.496.096.095.596.096.195.796.096.396.296.296.596.40.830.760.860.820.760.870.850.770.870.850.770.890.850.770.900.880.800.900.860.790.900.860.790.880.860.800.880.860.800.880.860.800.880.870.830.890.880.830.890.880.83484581708849962102611861282144316081795202022762405M AM N2.42.52.42.42.42.42.42.32.02.02.12.12.22.4I AIN7.47.47.77.77.87.87.87.66.65.77.27.26.87.4M K M SM N M N2.7 1.92.82.62.62.72.72.72.62.32.52.52.52.52.62.02.02.02.02.02.21.91.61.61.71.71.71.8M AM NY0.720.750.700.700.700.700.700.650.620.620.650.650.680.75I AI NY2.32.42.52.52.52.52.52.42.21.82.22.22.12.3M SM NY0.540.550.50.50.50.50.50.450.50.50.50.50.50.6Jkgm 20.661.63.23.74.44.75.55.58.29.510.611.913.214.6L PAdB(A)6969717173737373767676797979(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data1500 min -1 (4 pole)11Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp).75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)355(475)400(535)nmin –114801480148514851490149014901490149014851490149014901485TypeWU-DF280SNE (2)W-DF250MN (3)WU-DF280MNE (2)W-DF280SN (3)WU-DF315SNE (2)W-DF280MN (3)WU-DF315MNE (2)W-DF315SN (3)WU-DF315MN (2)W-DF315MN (3)WU-DF315MP (2)W-DF315MP (3)WU-DF315LN (2)W-DF315LN (3)WU-DF315LN (2)W-DF315LN (3)WU-DF355SG (2)W-DF355SG (3)WU-DF355SJ (2)W-DF355SJ (3)WU-DF355SN (2)W-DF355SN (3)WU-DF355MJ (2)W-DF355MJ (3)WU-DF355MN (2)W-DF355MN (3)WU-DF355LN (2)W-DF355LN (3)IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2400 VA135162193231256270312337388431483543605680I N690 VA7994112134149157181195225250280315351393η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm94.0 0.85{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }95.294.494.295.294.694.595.394.694.795.694.994.995.794.894.996.095.295.196.095.595.196.195.695.196.195.495.196.095.995.195.795.395.196.195.695.196.095.195.696.396.10.820.740.850.820.730.870.840.770.870.840.770.890.870.810.900.880.830.900.870.800.900.890.840.880.870.800.880.870.810.880.840.770.880.880.850.890.890.840.890.880.83484581710849961102611861282144216081795201922752572M AM N2.42.52.42.42.42.42.42.32.02.02.12.12.12.0I AIN7.47.47.77.77.87.87.87.66.65.77.27.27.26.0M K M SM N M N2.7 1.92.82.62.62.72.72.72.62.32.52.52.52.52.52.02.02.02.02.02.21.91.71.71.71.71.71.7M AM NY0.720.750.700.700.700.700.700.650.620.620.650.650.650.62I AI NY2.32.42.52.52.52.52.52.42.21.82.22.22.21.87M SM NY0.540.550.50.50.50.50.50.450.50.50.50.50.50.5Jkgm 21.41.63.23.74.44.75.55.58.29.510.611.913.214.6L PAdB(A)6969717173737373767676797979(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data121000 min -1 (6 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)0.75(1.0)1.1(1.5)1.5(2.0)2.2(3)3.0(4.0)4.0(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)nmin –1--960960970960965975980980980980985985990TypetbctbcWP-DF100LTF (1)WP-DF112MWX (1)WP-DF132SMX (1)WP-DF132MTX (1)WP-DF132MVX (1)WP-DF160MM (1)WP-DF160LV (1)WP-DF180LM (1)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF200LN (2)WP-DF200LN (3)WP-UDF225MN (2)WP-DF225MN (3)WP-UDF250MNE (2)WP-DF250SN (3)WP-UDF280SNE (2)WP-DF250MN (3)IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3230 VA--7.610.112.5----------I N400 VA--4.45.87.29.813.316.623.430.436.443.657.57185690 VA-----5.87.79.613.617.621.025.333.44150η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm- -{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }-----82.582.178.984.384.481.887.086.783.086.886.583.388.087.084.090.089.189.390.390.390.091.291.590.591.791.790.892.292.291.792.992.992.393.593.693.194.094.193.4-----0.600.480.370.650.580.430.690.620.430.680.590.490.680.530.420.730.650.560.750.690.530.780.720.610.800.730.620.790.730.630.810.770.680.810.770.680.810.770.69--14.921.929.539.854.573.5107146180215291359434M AM N--3.52.82.32.32.61.72.02.02.72.02.72.72.5I AIN--6.25.66.15.56.55.15.76.07.96.86.06.06.0M K M SM N M N- --4.13.02.52.53.01.62.52.42.62.32.12.12.0-3.62.42.22.11.91.31.91.52.82.21.81.81.8M AM NY––––-0.70.80.530.630.630.840.630.800.840.75I AI NY–––––1.72.01.62.31.92.52.22.01.91.9M SM NY–––––0.660.60.40.60.50.880.70.450.400.40Jkgm 2--0.0120.0150.0320.0380.0410.100.120.240.370.91.231.472.55L PAdB(A)--58545858585959596262636365(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data1000 min -1 (6 pole)13Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)0.37(0.5)0.55(0.75)0.75(1.0)1.1(1.5)1.5(2.0)2.2(3)3.0(4.0)4.0(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)nmin –1920920935925930950965960950975980980980980985985985TypeA-DF80MG (1)A-DF80MM (1)WU-DF90LTX (1)WU-DF90LWX (1)WU-DF100LSF (1)WU-DF112MT (1)WU-DF132SL (1)WU-DF132MM (1)WU-DF132MR (1)WU-DF160MM (1)WU-DF160LV (1)WU-DF180LM (1)WU-DF200LGX (2)W-DF200LGX (3)WU-DF200LNX (2)W-DF200LNX (3)WU-DF225MN (2)W-DF225MN (3)WU-DF250MNE (2)W-DF250SN (3)WU-DF280SNE (2)W-DF250MN (3)IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2230 VA---5.37.39.612.7----------I N400 VA1.271.772.23.04.25.57.39.312.616.624.030.936.54258.37186690 VA-------5.47.49.613.817.921.024.533.84150η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm69.0 0.61{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }68.064.071.071.068.075.973.870.178.175.673.179.876.874.681.877.673.983.384.883.284.684.882.586.085.283.587.288.186.288.790.088.589.790.889.690.490.890.090.991.190.591.792.892.092.293.392.692.793.492.80.510.400.630.540.410.650.540.440.670.570.420.650.680.510.700.560.450.710.670.540.740.660.540.730.680.550.750.670.560.750.670.570.780.740.630.810.760.650.830.780.680.810.730.630.810.860.660.810.820.803.85.77.711.415.422.129.739.855.373.5107146180214291359436M AM N2.02.03.23.02.02.52.32.22.01.82.02.42.32.32.72.72.5I AIN3.73.74.84.84.26.56.15.95.26.57.56.57.07.06.06.06.0M K M SM N M N2.2 1.82.33.33.02.82.92.32.52.02.82.82.82.02.12.12.12.01.82.52.61.92.01.61.61.61.71.92.22.82.81.81.81.8M AM NY––––––-–-0.550.600.650.650.650.800.800.75I AI NY––––––-–-2.12.52.22.32.32.02.01.9M SM NY––––––-–-0.50.50.60.50.50.450.450.40Jkgm 20.00150.00210.00390.00430.0110.0120.0270.0290.0320.100.120.230.420.481.231.472.55L PAdB(A)4949656558545858585959596262636365(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data141000 min -1 (6 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp).55(75)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)nmin –1990990990988985987990990-990990990990TypeWP-UDF280MNE (2)WP-DF280SN (3)WP-UDF315SNE (2)WP-DF280MN (3)WP-UDF315MNE (2)WP-DF315SN (3)WP-UDF315MN (2)WP-DF315MN (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF355SG (2)WP-DF355SG (3)WP-UDF355SG (2)WP-DF355SG (3)WP-UDF355SJ (2)WP-DF355SJ (3)tbctbcWP-UDF355MJ (2)WP-DF355MJ (3)WP-UDF355MN (2)WP-DF355MN (3)WP-UDF355LJ (2)WP-DF355LJ (3)WP-UDF355LN (2)WP-DF355LN (3)IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3IE3400 VA104138165196235270295328-394446491552I N690 VA608095114136156171190-229258284320η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm94.1 0.81{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }94.193.294.694.693.594.994.993.095.495.595.095.495.494.595.595.594.795.695.994.995.795.895.0---95.893.793.596.296.395.995.895.995.495.895.995.50.780.710.830.800.700.830.770.670.850.830.770.850.820.750.840.820.740.820.770.690.850.840.77---0.860.820.740.840.810.740.860.790.690.860.840.7753172486910641280145215441785-2170241327023040M AM N2.53.03.02.82.81.71.71.7-1.71.81.81.8I AIN6.17.07.06.76.77.06.76.7-6.77.07.07.0M K M SM N M N2.0 1.92.62.62.02.02.12.12.1-2.12.22.22.22.12.11.92.41.41.41.4-1.41.51.51.5M AM NY0.750.900.900.800.800.500.500.45-0.450.480.480.48I AI NY1.852.12.12.12.12.22.02.1-2.12.22.22.1M SM NY0.400.600.600.550.750.350.350.35-0.350.400.400.40Jkgm 22.95.06.06.17.3101011.1-10.315.216.918.6L PAdB(A)6568687870747474-77777777(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data1000 min -1 (6 pole)15Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp).55(75)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)nmin –1985990990988985987990990990990990990990TypeWU-DF280MNE (2)W-DF280SN (3)WU-DF315SNE (2)W-DF280MN (3)WU-DF315MNE (2)W-DF315SN (3)WU-DF315MN (2)W-DF315MN (3)WU-DF315LN (2)W-DF315LN (3)WU-DF355SG (2)W-DF355SG (3)WU-DF355SG (2)W-DF355SG (3)WU-DF355SJ (2)W-DF355SJ (3)WU-DF355SN (2)W-DF355SN (3)WU-DF355MJ (2)W-DF355MJ (3)WU-DF355MN (2)W-DF355MN (3)WU-DF355LJ (2)W-DF355LJ (3)WU-DF355LN (2)W-DF355LN (3)IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2IE2400 VA104139166198237272297331358398452495570I N690 VA608196115137158172192207230262287330η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm93.1 0.82{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }94.193.893.794.493.394.094.393.494.394.793.894.694.994.194.795.494.594.895.494.594.995.895.195.095.995.295.096.095.495.095.094.395.095.294.995.095.394.70.800.740.830.790.700.830.800.720.850.810.730.850.810.730.840.830.760.820.830.760.850.830.760.850.830.760.860.830.760.840.840.770.860.840.770.840.840.775337248731063128014511551178519392170241227013039M AM N2.53.03.02.82.81.71.71.71.71.71.81.81.8I AIN6.17.07.06.76.77.06.76.76.76.77.07.07.0M K M SM N M N2.0 1.92.62.62.02.02.12.12.12.12.12.22.22.22.12.11.91.91.41.41.41.41.41.51.51.5M AM NY0.750.900.900.800.800.500.500.450.450.450.480.480.48I AI NY1.852.12.12.12.12.22.02.12.12.12.22.22.1M SM NY0.400.600.600.550.550.350.350.350.350.350.400.400.40Jkgm 22.95.06.06.17.3101011.112.213.615.216.918.6L PAdB(A)65686870707474747477777777(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data16750 min -1 (8 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)0.18(0.25)0.25(0.33)0.37(0.5)0.55(0.75)0.75(1)1.1(1.5)1.5(2)2.2(3)3(4)4(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)nmin –1695695700680690690690720720725725725730730730730735TypeW-DF80MG (1)W-DF80MM (1)W-DF90SG (1)W-DF90LM (1)W-DF100LR (1)W-DF100LS (1)W-DF112MS (1)W-DF132SM (1)W-DF132MR (1)W-DF160ME (1)W-DF160MM (1)W-DF160LV (1)W-DF180LM (1)WU-DF200LNX (2)W-DF200LNX (3)WU-DF225SN (2)W-DF225SN (3)WU-DF225MN (2)W-DF225MN (3)WU-DF250MNE (2)W-DF250SN (3)380 VA1.011.261.712.42.773.94.66.28.210.413.918.227.635435067I N400 VA0.961.21.632.32.643.74.45.97.89.913.217.326.333404764415 VA0.961.21.632.32.643.74.45.97.89.913.217.326.332394561η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm55.0 0.49{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }52.044.059.056.549.062.059.051.064.062.055.069.568.061.071.570.568.074.574.071.082.583.080.084.084.082.086.086.084.087.087.085.588.088.086.090.090.088.090.090.088.590.590.589.591.591.589.092.092.090.00.420.340.510.430.340.530.440.340.540.440.330.590.490.400.600.510.390.660.560.440.650.570.450.660.580.450.680.640.510.690.650.520.710.650.520.670.590.480.730.660.540.730.660.540.740.660.540.740.670.552.53.55.17.610.415.220.729.239.852.772.498.8143.9196242288390M AM N2.22.22.32.31.81.81.91.61.61.61.61.62.01.82.02.01.7I AIN2.72.93.03.33.23.24.05.05.05.55.76.04.55.85.56.06.0M K M SM N M N2.5 2.02.52.52.72.12.12.02.42.42.52.52.52.52.62.252.42.42.02.12.11.71.71.71.51.41.41.41.41.71.61.61.61.6M AM NY---------0.50.50.50.630.450.50.450.4I AI NY––––––---1.71.71.81.41.71.61.71.7M SM NY–––––----0.450.450.450.550.350.350.350.35Jkgm 20.00170.00210.00280.00350.0090.00950.0150.0290.0310.090.110.140.240.480.751.231.47L PAdB(A)4646505053535757575353535860606262(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Performance data750 min -1 (8 pole)17Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressurelevel @ 1m on no loadP NkW(hp)37(50)45(60)55(75)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)nmin –1735735740740740740740740740740740740TypeWU-DF280SNE (2)W-DF250MN (3)WU-DF280MNE (2)W-DF280SN (3)WU-DF315SNE (2)W-DF280MN (3)WU-DF315MNE (2)W-DF315SN (3)WU-DF315MN (2)W-DF315MN (3)WU-DF315LN (2)W-DF315LN (3)WU-DF355SJ (2)W-DF355SJ (3)WU-DF355SN (2)W-DF355SN (3)WU-DF355SN (2)W-DF355SN (3)WU-DF355MJ (2)W-DF355MJ (3)WU-DF355MN (2)W-DF355MN (3)WU-DF355LN (2)W-DF355LN (3)380 VA8198119159188227274310331383413464I N400 VA7793113151179218260295315364393441415 VA7490109146172210251284303350378425η1.0 P NCos Ø1.0 P N M N0.5 P N 0.5 P N0.75 P N 0.75 P N Nm92.5 0.75{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }92.591.593.092.891.693.593.392.094.193.992.294.494.293.494.694.493.695.194.893.695.595.394.095.595.394.095.695.494.195.695.494.395.695.494.70.680.560.750.690.570.750.700.580.760.720.600.770.730.640.770.730.640.770.730.640.770.730.640.770.730.640.770.730.640.770.730.640.770.730.6448158571096811611419170319362065238725812903M AM N1.71.72.52.52.42.41.61.61.61.61.61.6I AIN6.06.06.06.06.06.06.16.16.16.16.16.1M K M SM N M N2.4 1.62.42.02.02.02.02.02.02.02.02.02.01.41.51.51.81.81.31.31.31.31.31.3M AM NY0.400.400.600.600.650.650.400.400.400.400.400.40I AI NY1.71.71.71.71.71.71.81.81.81.81.81.8M SM NY0.350.30.350.350.450.450.30.30.30.30.30.3Jkgm 22.552.95.06.06.17.312.213.613.615.216.918.6L PAdB(A)636364646565727272747474(1) European and BS frame reference(2)European frame reference(3) BS frame referenceFor performance curves and notes - see page 28

Dimensions - European & BS specifications18Foot, flange and face mounting - frame sizes 80 to 180LACEDEBTBWKKTBHIM B3IM 1001Mounting optionsKHAH HEHDECB CRSAAAABBA CRSABLLA4 HOLES SON M PCDIM B5/IM B35IM 3001/IM 2001Mounting optionsPN45°TLLAHOLES SON M PCDIM B14/IM B34IM 3601/IM 2101Mounting optionsPN45°T

Dimensions- European & BS specificationsFoot, flange and face mounting - frame sizes 80 to 18019GeneralTypeABCHKL2 poleL4 poleL6 poleL8 poleAAABACBBHAHDHEboxTBWTBHKKWU-DF80MWU-DF90SWU-DF90LWU-DF100LWU-DF100LFWU-DF112MWU-DF132SWU-DF132MWU-DF160MWU-DF160LWU-DF180MWU-DF180L1251401401601601902162162542542792791001001251401401401401782102542412795056566363708989108108121121809090100100112132132160160180180101010121212121215151515278-364368-382447447604604663663353838343440474755556464157175175195195230255255300300344344158175174197214220256256315315355355127155195206206182220220300300326326101212141416161622222222159*179*254274283305348348428428469469118*123*1231331421451681682082082302301201201201201201351351351741741741741201201201201201351351351741741741741 X 201 X 201 X 202 X 202 X 202 X 252 X 252 X 252 X 322 X 322 X 322 X 32TypeIM B5 mountingM N PSTLAIM B14 mountingM N PSTLAWU-DF80MWU-DF90S/LWU-DF100LWU-DF112MWU-DF132SWU-DF132MWU-DF160MWU-DF160LWU-DF180MWU-DF180L165165215215265265300300300300130130180180230230250250250250200200250250300300350350350350121215151515191919193.53.54444555512121212121213131515100115130130165165215215--8095110110130130180180--120140160164200200250250--M6M8M8M8M10M10M12M12--333.53.53.53.544--9912.51314141313--ShaftTypeDEFGGDEBEDDHWU-DF80MWU-DF90S/LWU-DF100LWU-DF112MWU-DF132SWU-DF132MWU-DF160MWU-DF160LWU-DF180MWU-DF180L19242828383842424848405060608080110110110110688810101212141415.52024243333373742.542.567778888993240505070701001001001004555555555M6 x 16M8 x 19M10 x 22M10 x 22M12 x 28M12 x 28M16 x 36M16 x 36M16 x 36M16 x 36GDDF}Terminal278-364368409382485485604604663663278-364-409382447447604604663663278322322368-382447447604604663663* All 80 frame motors and the 90 frame 8 pole motor have the terminal box mounted on the right hand side when viewed on DE. Dimension ‘HD’ is the top of the motor when terminal box R.H.S and dimension ‘HE’ is the centre line ofthe motor to the centre line of the cable entry position.Flange & FaceGTAPPEDHOLE DHFor tolerance details and notes - see page 23

Dimensions - European specification20Foot and flange mounting - frame sizes 200 to 355LLACEDEBTBWKKTBHIM B3IM 1001Mounting optionsKHAH HEHDECB CRSAAAABBA CRSABLLA4 HOLES SON M PCDIM B5/IM B35IM 3001/IM 2001Mounting optionsPN45°T8 HOLES SON M PCD (1)22.5°8 holes at 22.5° for flanges to suit 225 frames and above to European specification

Dimensions - BS specificationFoot and flange mounting - frame sizes 200 to 355L23GeneralTypeABCHKL4 pole +L2 poleAAABACBBHAHDTerminal box}TBW TBHW-DF200LX318305133200M167877877438238135930501176220W-DF225SW-DF225M356356286311149149225225M16M1687591584588570704264264104483493742525550 (1)570220220288288W-DF250SW-DF250MW-DF280SW-DF280M406406457457311349368419168168190190250250280280M20M20M20M209851030110011459851030107011157979838348248254054044850850856338141943848728283535595 (2)625 (1)655 (1)810220220220330288288288526W-DF315S508406216315M24121511858959756348338845330526W-DF315M508457216315M24124512158959764053338875330526W-DF315L508508216315M24131512858959764058338875330526W-DF355S610500254355M241485141510071073262627970330526W-DF355M610560254355M241605153510071073268627970330526W-DF355L610630254355M241655158510071073275627970330526Shaft4 pole + 2 poleTypeDEFGGDEBEDDHDEFGGDEBEDDHW-DF200LX551101649101005M20 x 42551101649101005M20 x 42W-DF225S6014018531112510M20 x 42551101649101005M20 x 42W-DF225M6014018531112510M20 x 42551101649101005M20 x 42W-DF250S701402062.51212510M20 x 426014018531112510M20 x 42W-DF250M701402062.51212510M20 x 426014018531112510M20 x 42W-DF280S801702271141605M20 x 426514018581112510M20 x 42W-DF280M801702271141605M20 x 426514018581112510M20 x 42W-DF315S851702276141605M20 x 426514018581112510M20 x 42W-DF315M851702276141605M20 x 426514018581112510M20 x 42W-DF315L851702276141605M20 x 426514018581112510M20 x 42W-DF355S1002102890162005M24 x 50751402067.51212510M24 x 50W-DF355M1002102890162005M24 x 50751402067.51212510M24 x 50W-DF355L1002102890162005M24 x 50751402067.51212510M24 x 50FlangeIM B5, IM B35 mountingTypeMNPSTLAW-DF200LX35030040019519W-DF225S40035045019519W-DF225M40035045019519W-DF250S50045055019525W-DF250M50045055019525W-DF280S50045055019525W-DF280M50045055019525W-DF315S60055066024629W-DF315M60055066024629W-DF315LW-DF355S6007405506806608002424662928GDW-DF355M74068080024628W-DF355L74068080024628FD(1) add 25mm when cable entry is facing drive end(2) add 50mm when cable entry is facing drive endGTAPPEDHOLE DHFor tolerance details and notes - see page 23

Mounting options24Horizontal shaft:IM B3IM 1001foot mountedIM B5IM 3001flange at DEno feetIM B6IM 1051foot wall mounted withfeet on left-hand sidewhen viewed from DEIM B7IM 1061foot wall mounted withfeet on right-hand sidewhen viewed from DEIM B8IM 1071ceiling mountedwith feetabove motorIM B14IM 3601face at DEno feetVertical shaft:IM V1IM 3011flange at DEshaft downno feetIM V3IM 3031flange at DEshaft upno feetIM V5IM 1011vertical footwall mountedshaft downIM V6IM 1031vertical footwall mountedshaft upIM V18IM 3611face at DEshaft downno feetIM V19IM 3631face at DEshaft upno feetApproximate shipping specificationsTypeEuropeanBSWU-DF80M WU-DF80MWU-DF90S WU-DF90SWU-DF90L WU-DF90LWU-DF100L WU-DF100LWU-DF100LF WU-DF100LFWU-DF112M WU-DF112MWU-DF132S WU-DF132SWU-DF132SX WU-DF132SXWU-DF132M WU-DF132MWU-DF132MX WU-DF132MXWU-DF160M WU-DF160MWU-DF160L WU-DF160LWU-DF180M WU-DF180MWU-DF180L WU-DF180LWU-DF200LX W-DF200LXWU-DF225S W-DF225SWU-DF225M W-DF225MWU-DF250ME W-DF250SWU-DF280SE W-DF250MWU-DF280ME W-DF280SWU-DF315SE W-DF280MWU-DF315ME W-DF315SWU-DF315M W-DF315MWU-DF315L W-DF315LWU-DF355S W-DF355SWU-DF355M W-DF355MWU-DF355L W-DF355LNet weight (kg) Gross weight (kg) Cubage (m 3 )151930.535.541.845.068.078.172.582.6121133162177.525532037542057066080010001100130020002300250016.520.531.538.044.348.071.081.178.588.6133145178193.52703353904606107218711095119513952120242026200.020.030.030.040.040.050.080.080.080.080.150.150.210.210.300.370.370.630.701.21.21.81.81.82.32.32.3Weights listed above are approximate and based on foot mounted (B3) standard design.

Technical informationMechanical: grease, bearings & oilseals25Bearings and greasing arrangementsBearings are pre-packed with a grease typedependant on frame size and re-greasing facility asdetailed in table opposite:Standard and re-greasing facilitiesType Standard grease Re-greasingfacility80 - 180200 - 355EA6 PolyureaEsso Unirex N3AvailableStandardBearing references and oil seals for horizontally-mounted motors onlyTypeBearings (1)Oil seals (2)EuropeanBSPolarityDrive endNon-drive endDrive endNon-drive endWU-DF80MWU-DF90S/LWU-DF100LWU-DF112MWU-DF132S/MWU-DF160M/LWU-DF180M/LWU-DF200LXWU-DF225SWU-DF225MWU-DF250MEWU-DF280SEWU-DF280MEWU-DF315SEWU-DF315MEWU-DF315MWU-DF315LWU-DF355S/M/LWU-DF80MWU-DF90S/LWU-DF100LWU-DF112MWU-DF132S/MWU-DF160M/LWU-DF180M/LWU-DF200LXWU-DF225SWU-DF225MW-DF250SW-DF250MW-DF280SW-DF280MW-DF315SW-DF315MW-DF315LW-DF355S/M/LAllAllAllAllAllAllAllAllAllAll24 up24 up24 up24 up24 up24 up24 up24 up62042Z62052Z62062Z62062Z62082Z63092Z63102Z63126313631463146316631463186314631863166319631663196316631963166319N316N32460032Z62032Z62052Z62052Z63052Z63072Z63082Z631263136314631463166314631863146318631663196316631963166319631663196316632420 x 30 x 7 (3)25 x 35 x 7 (3)30 x 42 x 7 (3)30 x 42 x 7 (3)40 x 52 x 7 (3)45 x 60 x 8 (3)50 x 65 x 8 (3)60 x 80 x 8 (3)65 x 90 x 10 (4)70 x 90 x 10 (4)70 x 90 x 10 (4)80 x 110 x 10 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)75 x 100 x 10 (4)115 x 145 x 14 (3)15 x 24 x 5 (3)17 x 28 x 6 (3)25 x 37 x 7 (3)25 x 37 x 7 (3)25 x 37 x 7 (3)35 x 47 x 7 (3)40 x 52 x 7 (3)60 x 80 x 8 (3)65 x 90 x 10 (4)70 x 90 x 10 (4)70 x 90 x 10 (4)80 x 110 x 10 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)75 x 100 x 10 (4)115 x 145 x 14 (3)(1)Frame sizes 80 and 90 have bearings with CN clearances, frame sizes 100 to 355 have bearings with C3 clearance ‘medium’ series(2) Sizes given are in mm, and represent bore x outside diameter x widthMaterial: (3) Nitrile rubber (4) Silicon rubberGrease life expected at 80ºC bearing temperature x 10 3 hoursType1500 min -1 1000 min -1 750 min -1EuropeanBS3000 min -1 Vertical HorizontalHorizontalVertical Horizontal Vertical Horizontal VerticalWU-DF80-112WU-DF132WU-DF160WU-DF180WU-DF200LXWU-DF225SWU-DF225MWU-DF250MEWU-DF280SEWU-DF280MEWU-DF315SEWU-DF315MEWU-DF315MWU-DF315LWU-DF355S/M/L (1)WU-DF355S/M/L (2)WU-DF80-112WU-DF132WU-DF160WU-DF180W-DF200LXW-DF225SW-DF225MW-DF250SW-DF250MW-DF280SW-DF280MW-DF315SW-DF315MW-DF315LW-DF355S/M/L (1)W-DF355S/M/L (2)30.030.029.024.012.612.611.311.311.311.39.49.49.49.45.09.430.025.019.016.08.28.27.47.47.47.46.16.16.16.13.36.130.030.030.030.030.030.029.526.323.423.421.321.321.321.38.213.530.030.030.030.020.320.319.217.115.215.213.813.813.813.85.38.830.030.030.030.030.030.030.030.030.030.030.030.030.030.016.222.530.030.030.030.027.827.826.023.621.321.320.320.320.320.310.514.630.030.030.030.030.030.030.030.030.030.030.030.030.030.024.530.030.030.030.030.030.030.030.029.327.827.826.026.026.026.015.919.5(1) DE = Drive End(2) NDE = Non-Drive End

Technical information26Mechanical: Axial and radial loadsMaximum permissible external axial thrust and radial loads in Newtons (N)TypePolesLoadtowardsmotorHorizontal shaftLoadaway frommotorLoad towardsmotorShaft upLoad awayfrom motorVertical shaftLoad towardsmotorShaft downLoad awayfrom motorMaximumpermissible radial loadat end of shaft(standard mounting)WU-DF80MWU-DF90SWU-DF90LWU-DF100LWU-DF112MWU-DF132SWU-DF132MWU-DF160MWU-DF160LWU-DF180MWU-DF180L2468682468246824682468468246824682468912868754773854874107010058438701563146614121225155114521403121024812459239318782449237218742168215320221509214421231973146427112749257522667126685545736146348307656036301243114610929051231113210838902129210720411526209720201522266326482517200426392618246819593274331231382829746701594613660680870832667686131112731176994132012861203100922832330221717282339222717332932295929052389295029822946243536673830378534698978527347538288481041957807839152213871359116714971356132711332386232122841745230122441734200219601777125019511895166911442465242621661850946901794813900920111010729079261631159314961314164016061523132926352682256920802691257920852437246424101894245524872451194031043267322229066976525345535886088017175675991202106710398471177103610078132034196919321393194918921382220221601977145021512095186913442665262623662050775742648664741757957893722749129012481171102213701259123610722184213320321614211720021605365037853626331636133738354432334374455643343979All figures are based on L10aah life of 20,000 hours

27Technical informationMechanical: Axial and radial loadsWU-DF200LXWU-DF225SWU-DF225MWU-DF250MEWU-DF280SEWU-DF280MEWU-DF315SEWU-DF315MEWU-DF315MWU-DF315LWU-DF355SWU-DF355MWU-DF355LMaximum permissible external axial thrust and radial loads in Newtons (N)246846824682468246824682468246824682468246824682468Poles54356058605557816692677064416729753076407293664090129391900765051024110846104006268977410582101367443103051119010797733710077109581034773981019211060106677055100081087210263611812994140381410657791252813148132145595123431293613002Horizontal shaftVertical shaftAll figures are based on L10aah life of 20,000 hoursBSframeLoadtowardsmotorLoadaway frommotor47755398539551216122620058716197699871086761610884188797841359119579101849738573691129920947468499965108501045767439737106181000768049852107201032764619668105329923552411454124981256651851098811608116745001108031139611462500555315457518359415935560660846745667363265837803083117927547289439423897751018014870482575921829990508657565476728419779856648006871583225050750182077587313687999387945523267511752375891734703869807046LoadtowardsmotorLoad awayfrom motor536161216215594171777371704270828099846381167209979410311992773521137712157117117355115341252412077895712719138101341790821304414131135109154128621397113578916413123142291360996921738919143192111005018055195331959910396182821979419860602167816875660177477941761276148631899586487741103881090510521794612039128191237378871219613186127399551130591415013757967613384144711385097481320214311139189758134631456913949102861892920683207511064419595210732113910990198222133421400LoadtowardsmotorLoad awayfrom motor434548714797452353715365503662136213614157945305743677177333487882818761831545697352804275955327795987108317506073328079745850707666837579824456716178677247254272597847791517325971598360491140549854405506Europeanframe51255588553652525963598256486602686868566501626281638477808756929260933693365824913696989216680494431004296306680912197349312688594821006696406603920798019367------------EuropeanframeBSframe512555885536525259635982564866026876685665016262816384778087589796271018297065795884293868919680494431004296306680912197349312688594821006696406606920798019367------------7541754175417541820282028202874589218921892189211134211342113428242171051710517105982517423174231742311342174141741417414113421741417414174141134217414174141741411342174141741417414126272753327533275331262727533275332753312627275332753327533EuropeanframeBSframe7541754175417541820282028202874589218921892189211416614166141668921141661416614166950317348173481734811342174141741417414113422088720887208871134220748207482074811342207482074820748126272753327533275331262727533275332753312627275332753327533Maximum permissible radial load at end of shaftShaft up Shaft down Standard ball bearing Roller bearingTypeW-DF200LXW-DF225SW-DF225MW-DF250SW-DF250MW-DF280SW-DF280MW-DF315SW-DF315MW-DF315LW-DF355SW-DF355MW-DF355L

Performance data notes28Speed / torque, speed / current curvesDOL startingTypical speed/current curveTypical speed/torque curve (I A ) Starting current(I N ) Full load current(M A ) Starting torque or locked rotor torque(M S ) Pull up torque or run up torque(M K ) Pull out torque or breakdown torque(M N ) Full load torqueTorque/speed curves for specific motors can besupplied on request.Star delta startingNotesDuring the run up period in Star, there must be anadequate excess of motor torque over the loadtorque. The change to Delta must not occur untilthe motor is near the operating speed.Typical speed/current curveTypical speed/torque curveRefer to Brook Crompton for running up against aload in excess of 70% full load during Star Deltastarting.Motors are wound for either 230/400 volts or400 / 690 voltsPerformance figures are subject to IECtolerances. Performance figures are based on a400 volt winding.J (WK 2 or WR 2 ) =kgmJ in lb ft 2 =20.042GD 24Where performance data indicates IE2 or IE30.75kW to 375kW 2,4 & 6 pole within this catalogue,motor testing is in accordance withIEC 60034-2-1: 2007.

Dimensions notesPage notes29ShaftAll dimensions in millimetresDim D11 to 1419 to 2838 to 4855 to 8085 to 110Tolj6j6k6m6m6Limits+0.008–0.003+0.009–0.004+0.018+0.002+0.030+0.011+0.035+0.013DGGDFTAPPEDHOLE DHCable entry can be arranged in any one of fourpositions at 90° intervalsDimensions should not be used for installationpurposes unless specially endorsedB5 mounted motors have suffix ‘-D’ in theframe reference, eg WU-DF112MM-D and B3/B5mounted motors have suffix ‘-H’ in the framereference, eg WU-DF112MM-HFlangeDim NTolIEC 60072LimitsLLAB14 mounted motors have suffix ‘C’ in theframe reference, eg WU-DF112MM-C andB3/B14 mounted motors have suffix ‘-H’ in theframe reference, eg WU-DF112MM-H110130230 to 250300350450550680j6j6j6j6j6j6j6js6+0.013–0.009+0.014–0.011+0.016–0.013+0.016-0.016+0.018-0.018+0.020-0.020+0.022-0.022+0.025-0.025PNTDimensions should not be used for installationpurposes, unless specially endorsed.LFaceIEC 60072LADim NTolLimits70 and 8095 and 110130230j6j6j6j6+0.012–0.007+0.013–0.009+0.014–0.011+0.016–0.013PNT

Every care has been taken to ensure the accuracy of theinformation contained in this publication, but, due to a policy ofcontinuous development and improvement the right is reservedto supply products which may differ slightly from thoseillustrated and described in this publicationBrook Crompton UK LtdSt Thomas’ Road HuddersfieldWest Yorkshire HD1 3LJ UKTel: +44 (0) 1484 557200Fax: +44 (0) 1484 557201E-mail: csc@brookcrompton.comInternet: www.brookcrompton.comPrinted in Englanddh1110/*/*/12/13 20113E Issue 2.4 (W C.I. IE2 & IE3)© Copyright 2013. Brook Crompton UK Ltd. All rights reserved.