Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HSSCARBIDESPIRALPOINT TAPSTC622 <strong>SERIES</strong>COMBOTAPSSPIRALPOINT TAPSSPIRALFLUTE TAPSM-AzHole type<strong>ISO</strong> <strong>metric</strong> <strong>coarse</strong> <strong>threads</strong> <strong>DIN</strong> <strong>13</strong>Metrisches <strong>ISO</strong>-Gewinde <strong>DIN</strong> <strong>13</strong>▶ Interrupted tap to reduce contact area and tapping torque, and togive more chip space.▶ Gewindebohrer mit ausgesetzten Zahnen um die Kontaktzonemit dem Werkstuck und das Drehmoment zu minimieren unddem Span mehr Raum zu geben.<strong>DIN</strong> 371<strong>DIN</strong> 376STRAIGHTFLUTE TAPSCOLDFORMINGTAPSHSS-ED1<strong>DIN</strong>371/3766HD260。 BBright60。PMachine tapsMaschinengewindebohrerNUT TAPSSTI TAPSHAND TAPSPIPE TAPSCARBIDETAPSTHREADMILLSTECHNICALDATASIZEØD1M2M2.2M2.3M2.5M2.6M3M3.5M4M4.5M5M6M7M8M9M10M11M12M14M16M18M20M22M24M27M30L1×××××××××××××××××××××××××PitchP0.40.450.40.450.450.50.60.70.750.8111.251.251.51.51.75222.52.52.5333.5L2EDP No.TC622<strong>13</strong>6TC622156TC622196TC622176TC622496TC622206TC622226TC622246TC622266TC622286TC622316TC622346TC622366TC622396TC622426TC622466TC622506TC622546TC622606TC622656TC622706TC622746TC622786TC622866TC622946▶<strong>DIN</strong> 371(M2~M10) and <strong>DIN</strong> 376(M11~M30)▶<strong>DIN</strong> profile not <strong>ISO</strong>Ti Alloy≤ <strong>13</strong>00Ni< 500Ni Alloy< 900Ni Alloy≤ 1400Cu< 350ThreadLengthL<strong>13</strong>64 • phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr888991112<strong>13</strong>1415171720202222242627303232343640KOverallLengthL24545455050565663707080809090100100110110110125140140160160180ShankDiameterØD22.82.82.82.82.83.544.566678910891112141618182022Cu Alloy Cu Alloy Cu-Al-Fe Al / Mg AlShort Long < 1500 < 350 Wrought◎ ◎ ◎ ◎AlSi≤10%SquareSizeK2.12.12.12.12.12.733.44.94.94.95.56.2786.2799111214.514.51618AlSi>10%PlasticThermosoftd1Unit : mmTapping drilldiameterØd11.61.751.92.052.12.52.93.33.74.2566.87.88.59.510.2121415.517.519.5212426.5Unit : N/mm 2◎ : Excellent ◯ : GoodSteel Steel Steel St. Alloy St. Alloy St. Alloy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast GGG Cast Ti Ti Alloy< 400 < 700 < 850 < 850 ≤ 1200 > 1200 < 850 < 850 < 1000 < 500 < 1000 < 700 < 1000 < 700 < 900○ ○ ○ ○PlasticThermosetPlasticFRP