You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STRAIGHTFLUTE TAPSTE443 <strong>SERIES</strong>HSSCARBIDEM<strong>ISO</strong> <strong>metric</strong> <strong>coarse</strong> <strong>threads</strong> <strong>DIN</strong> <strong>13</strong>Metrisches <strong>ISO</strong>-Gewinde <strong>DIN</strong> <strong>13</strong>▶ Suitable for brass and short chip work materials.▶ Geeignet zum Gewindeschneiden von Messing und anderenkurzspanenden Werkstoffen<strong>DIN</strong> 371COMBOTAPSSPIRALPOINT TAPSHole type<strong>DIN</strong> 376SPIRALFLUTE TAPSHSS-ED1<strong>DIN</strong>371/3766HX 60。 CD2NI60。PMachine tapsMaschinengewindebohrerSTRAIGHTFLUTE TAPSCOLDFORMINGTAPSNUT TAPSKL1L2d1SIZEØD1M2M2.2M2.3M2.5M2.6M3M3.5M4M4.5M5M6M7M8M9M10M11M12M14M16M18M20M22M24M27M30×××××××××××××××××××××××××PitchP0.40.450.40.450.450.50.60.70.750.8111.251.251.51.51.75222.52.52.5333.5EDP No.TE443<strong>13</strong>6TE443156TE443196TE443176TE443496TE443206TE443226TE443246TE443266TE443286TE443316TE443346TE443366TE443396TE443426TE443466TE443506TE443546TE443606TE443656TE443706TE443746TE443786TE443866TE443946▶<strong>DIN</strong> 371(M2~M10) and <strong>DIN</strong> 376(M11~M30)▶<strong>DIN</strong> profile not <strong>ISO</strong>ThreadLengthL1888991112<strong>13</strong>1415171720202222242627303232343640OverallLengthL24545455050565663707080809090100100110110110125140140160160180ShankDiameterØD22.82.82.82.82.83.544.566678910891112141618182022SquareSizeK2.12.12.12.12.12.733.44.94.94.95.56.2786.2799111214.514.51618Unit : mmTapping drilldiameterØd11.61.751.92.052.12.52.93.33.74.2566.87.88.59.510.2121415.517.519.5212426.5STI TAPSHAND TAPSPIPE TAPSCARBIDETAPSTHREADMILLSTECHNICALDATAUnit : N/mm 2Steel< 400Steel< 700Steel< 850St. Alloy< 850St. Alloy≤ 1200St. Alloy> 1200INOX Free< 850INOX Aust.< 850INOX< 1000GG Cast< 500GG Cast< 1000GGG Cast< 700◎ : ExcellentGGG Cast< 1000Ti< 700◯ : GoodTi Alloy< 900Ti Alloy≤ <strong>13</strong>00Ni< 500Ni Alloy< 900Ni Alloy≤ 1400Cu< 350Cu AlloyShort◎Cu AlloyLongCu-Al-Fe< 1500Al / Mg< 350AlWroughtAlSi≤10%AlSi>10%PlasticThermosoftPlasticThermosetPlasticFRPphone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr • 439