You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STRAIGHTFLUTE TAPSTC463 <strong>SERIES</strong>HSSCARBIDEM<strong>ISO</strong> <strong>metric</strong> <strong>coarse</strong> <strong>threads</strong> <strong>DIN</strong> <strong>13</strong>Metrisches <strong>ISO</strong>-Gewinde <strong>DIN</strong> <strong>13</strong>▶ Suitable for tapping shallow holes and the blind holes havingenough chip space at the bottom of holes.▶ Geeignet zum Schneiden von kurzem Durchgangsgewinde undin Sacklöchern mit ausreichendem Raum für Späne amBohrungsgrund.<strong>DIN</strong> 371COMBOTAPSSPIRALPOINT TAPSHole type<strong>DIN</strong> 376SPIRALFLUTE TAPSHSS-ED1<strong>DIN</strong>371/3766HD260。 CBright60。PMachine tapsMaschinengewindebohrerSTRAIGHTFLUTE TAPSCOLDFORMINGTAPSSIZEØD1M2M2.2M2.3M2.5M2.6M3M3.5M4M4.5M5M6M7M8M9M10M11M12M14M16M18M20M22M24M27M30L1×××××××××××××××××××××××××PitchP0.40.450.40.450.450.50.60.70.750.8111.251.251.51.51.75222.52.52.5333.5EDP No.TC463<strong>13</strong>6TC463156TC463196TC463176TC463496TC463206TC463226TC463246TC463266TC463286TC463316TC463346TC463366TC463396TC463426TC463466TC463506TC463546TC463606TC463656TC463706TC463746TC463786TC463866TC463946▶<strong>DIN</strong> 371(M2~M10) and <strong>DIN</strong> 376(M11~M30)▶<strong>DIN</strong> profile not <strong>ISO</strong>Unit : N/mm 2Steel< 400○Ti Alloy≤ <strong>13</strong>00Steel< 700Ni< 500Ni Alloy< 900Ni Alloy≤ 1400L2Cu< 350Cu AlloyShortThreadLengthL1888991112<strong>13</strong>1415171720202222242627303232343640KOverallLengthL24545455050565663707080809090100100110110110125140140160160180ShankDiameterØD22.82.82.82.82.83.544.566678910891112141618182022Cu Alloy Cu-Al-Fe Al / Mg Al AlLong < 1500 < 350 Wrought Si≤10%○ ○ ○SquareSizeK2.12.12.12.12.12.733.44.94.94.95.56.2786.2799111214.514.51618Steel St. Alloy St. Alloy St. Alloy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast< 850 < 850 ≤ 1200 > 1200 < 850 < 850 < 1000 < 500 < 1000 < 700○ ○ ○ ○ ○AlSi>10%PlasticThermosoftd1Unit : mmTapping drilldiameterØd11.61.751.92.052.12.52.93.33.74.2566.87.88.59.510.2121415.517.519.5212426.5◎ : ExcellentGGG Cast< 1000Ti< 700PlasticThermoset◯ : GoodTi Alloy< 900PlasticFRPphone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr • 433NUT TAPSSTI TAPSHAND TAPSPIPE TAPSCARBIDETAPSTHREADMILLSTECHNICALDATA