You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPIRALFLUTE TAPSBSWWhitworth <strong>threads</strong>Whitworth Gewinde▶ Suitable for tapping blind holes due to special flute geometry andexcellent chip evacuation.Hole typeTC<strong>13</strong>4 <strong>SERIES</strong>▶ Geeignet zum Gewinden von Sacklöchern dank besondererNutengeometrie und ausgezeichneter Spanabfuhr.<strong>DIN</strong> 2182<strong>DIN</strong> 2183HSSCARBIDECOMBOTAPSSPIRALPOINT TAPSSPIRALFLUTE TAPSHSS-ED1<strong>DIN</strong>2182/218355。 CD2BrightR4055。PMachine tapsMaschinengewindebohrerSTRAIGHTFLUTE TAPSCOLDFORMINGTAPSNUT TAPSKL1L2d1SIZEØD1W1/8"W5/32"W3/16"W7/32"W1/4"W5/16"W3/8"W7/16"W1/2"W9/16"W5/8"W3/4"W7/8"W1"W1*1/8"---------------TPI403224242018161412121110987EDP No.TC<strong>13</strong>4200TC<strong>13</strong>4280TC<strong>13</strong>4320TC<strong>13</strong>4360TC<strong>13</strong>4400TC<strong>13</strong>4440TC<strong>13</strong>4480TC<strong>13</strong>4520TC<strong>13</strong>4560TC<strong>13</strong>4600TC<strong>13</strong>4640TC<strong>13</strong>4700TC<strong>13</strong>4740TC<strong>13</strong>4780TC<strong>13</strong>4820ThreadLengthL1771010<strong>13</strong>14161720202225273035▶<strong>DIN</strong> 2182(W1/8"~W3/8") and <strong>DIN</strong> 2183(W7/16"~W1*1/8")OverallLengthL2566370808090100100110110110125140160180ShankDiameterØD23.54.56678989111214182022SquareSizeK2.73.44.94.95.56.276.27991114.51618Unit : mmTapping drilldiameterØd12.53.<strong>13</strong>.64.45.16.57.99.310.512<strong>13</strong>.516.519.252224.75STI TAPSHAND TAPSPIPE TAPSCARBIDETAPSTHREADMILLSTECHNICALDATAUnit : N/mm 2Steel< 400○Ti Alloy≤ <strong>13</strong>00Steel< 700Steel St. Alloy St. Alloy St. Alloy INOX Free INOX Aust. INOX GG Cast GG Cast GGG Cast< 850 < 850 ≤ 1200 > 1200 < 850 < 850 < 1000 < 500 < 1000 < 700○ ○ ○ ○ ○Ni< 500Ni Alloy< 900Ni Alloy≤ 1400Cu< 350Cu AlloyShortCu Alloy Cu-Al-Fe Al / Mg Al AlLong < 1500 < 350 Wrought Si≤10%○ ○ ○AlSi>10%GGG Cast< 1000PlasticThermosoft◎ : ExcellentTi< 700PlasticThermoset◯ : GoodTi Alloy< 900PlasticFRPphone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr • 429