Automotive lifts - Heka.pl

multiliftThe scissor-type lift for service check-in, repairsand wheel alignmentmultilift – general information• Rated load capacity 4000 kg• Automatic levelling of runways priorto every lifting operation• Electronic control system• Synchronisation control via light barrierand follower cylinder• Clearance between runways adjustableto customer requirements• Electric and hydraulic lines guided inside the frame• Electro-hydraulic drive• Adjustable precision gear racks for optimum levelling• Installation above floor level, or flush mounting• For vehicles with a maximum wheelbase of 3600 mm• Power supply 3/PE AC 50 Hz 380-415 V• Compressed air supply 6-10 bar• GS homologation (German safety standard)• CE conformmultilift 4000 F• Runway-type lift• Width of runways 660 mm• Length of runways 4200 mm• Actual working length 3500 mm• Lifting height 1850 mm• With integrated wheel lift:• Lifting height 450 mm• Accommodation length 1350-2100 mm• Including 4 rubber pads 80 mm highmultilift 4000 AF• Runway-type lift for wheel alignment• Width of runways 660 mm• Length of runways 4200 mm• Actual working length 3500 mm• Lifting height 1850 mm• Runways with adjustable recesses for turning plates andwith integrated slip plates• Automatic adjustment of work position• With integrated wheel lift:• Lifting height 450 mm• Accommodation length 1350-2100 mm• Including 4 rubber pads 80 mm highmultilift 4000 A–MB (Mercedes approval)Runway-type lift for wheel alignmentOfficially listed by DaimlerChrysler• Runway-type lift for wheel alignment• Width of runways 660 mm• Length of runways 4200 mm• Actual working length 3500 mm• Lifting height 1850 mm• Runways with adjustable recesses for turning plates andwith integrated slip plates• Rails for jacking beam• Automatic adjustment of work position• Including holder for wheel aligner and shelves for thewheel units of the MKS system• Including wiring kit for computerised wheel alignermultilift 4000 AFLSame as multilift 4000 AF, but:• Length of runways 4800 mm• Actual working length 4100 mm• Not suitable for attachment of play detector• Rails ref. no. 1951 025 required if jacking beam is fitted