Automotive lifts - Heka.pl

monolift ME 2.0 + duolift GTE 2500 / BT 2500Single- and two-post lifts for the everyday use 2 – 2,5 ton capacitymonolift ME 2.0Specially suited for use in confined spaces and forbody work where free access to one car side is important• Lifting carriage guided inside the column• Special supporting nut made of Nylatron• Specially rolled column profile• Low pick-up height• Pick-up pads can be lowered to drive over• Optimum safey system owing to new nut assembly• Infinitely addjustable arm locks• Excellent access to car underside owing to extremelycompact lifting arms• Large accommodation range owing to optimum adjustmentof lifting armsduolift GTE 2500The standard lift with base frame• Extremely low base frame height of 45 mm• Pick-up height 105 – 165 mm,as low as 95 mm with stationary pick-up pads• Automatic arm locks• Electro-mechanical drive• Automatic lubrication of lifting spindle• Chain guide and chain fracture switch integrated in baseframeduolift BT 2500Lift with crossbeam, but without base frame, perfectlysuited for use with body repait- / straightening benches• Synchronisation via roller chain in the crossbeam• Pick-up height 105 – 165 mm,as low as 95 mm with stationary pick-up pads• Automatic arm locks• Electro-mechanical drive• Automatic lubrication of lifting spindle• Chain guide and chain fracture switch integrated in crossbeam• Low-noise automatic chain tensioning device withoutchain deflection