506N3 Series Rev 4 P1 - Criticare Systems Inc.

Vital SignsMonitoringVitalCare Series Patient MonitorsMULTIPLE CONFIGURATIONS I BATTERY MANAGEMENT I COST EFFECTIVEProprietary ComfortCuff NIBP, pulse oximetry and predictive temperature in onecompact, easily transported monitor. Ideal for spot-checks or continuous vital signsmonitoring.FeaturesProprietary ComfortCuff NIBP measures oninflation for faster, more comfortable readings.Choice of Criticare’s DOX digital SpO2 orNellcor OxiMax SpO2 technology.Audible and visual alarms are adjustable;providing instant notification in the manneryou need them.Optional FILAC FasTemp or Alaris TurboTemp predictive temperature for quick, accuratemeasurements.Optional internal printer for on-demand,automatic interval, trends or multi-patientreports.Spot-check or continuously monitor three criticalparameters - on neonates to adults - with a single monitor.Designed to travel everywhere you do, the VitalCare Series of patientmonitors with integrated carry handle attach quickly and easily to IVpole mounts or rollstands. Available in multiple configurations - withchoice of Criticare or Nellcor oximetry - these VitalCare monitorsprovide maximum versatility and cost-effectiveness.Smart battery management allows up to 100 NIBP measurements on asingle charging. With a compact design that is easily set-up forspot-checks or continuous monitoring, the VitalCare Series patientmonitors adapt readily to hospital, clinical and transportrequirements.

VitalCareTMSeries Patient MonitorsTechnical SpecificationsNIBP (Non-Invasive Blood Pressure)Technique:Oscillometric during inflationMeasurement Cycle:< 40 sec. typicalAutomatic MeasurementCycles (Selectable):1 to 60 minute; 2 to 4 hour; STATSTAT Mode:5 minutes of continuous readingsInflation Pressure Range: Adult: 30 to 300 mmHgPediatric: 30 to 150 mmHgNeonate: 20 to 150 mmHgResolution:1 mmHgTransducer Accuracy:±2 mmHg or ±2% of reading, whichever is greaterover full rangeClinical Accuracy:SP-10:2002Pulse OximetryRange: 1% to 99%Resolution: 1%Accuracy (DOX TM only): 70% to 99% range: ±2%50% to 69% range: ±3%;< 50%: unspecifiedAccuracy (OxiMax TM only): 70% to 99% range: ±2%< 70%: unspecifiedMethod:Dual wavelength LEDAudio:Tone with each detected pulse; pitch varieswith saturationHeart (Pulse) RateRange:20 to 300 bpmAccuracy (DOX TM only): Greater of ±1 bpm or ±1% of readingUnspecified for 240 bpmAccuracy (OxiMax TM only): Greater of ±1 bpm or ±1% of readingUnspecified for 240 bpmUpdate time:1 secondResolution:1 bpmPulse Volume10 levels or OffTemperature (FILAC)Type:FasTemp TMMethod:Predictive or continuousChannels: 1Range:86° to 109.4°F (30° to 43°C)Accuracy Continuous Mode: ±0.2°F (±0.1°C)Accuracy Predictive Mode: ±0.2°F (±0.1°C) for ranges 37° to 39°C(Compliant with EN 12470-3 and ASTM E1112:98)Resolution:±0.1°F or ±0.1°CPredictive Response Time: Oral: 10 seconds typical;Axial: 10 seconds typical;Rectal: 10 seconds typicalTemperature (Alaris)Type:TurboTemp TMMethod:Predictive or continuousChannels: 1Predictive Mode Range: 96° to 106°F (35.6° to 41.1°C)Continuous Mode Range: 80° to 106°F (26.7° to 41.1°C)Accuracy:±0.2°F (±0.1°C) (measured in calibrated waterbath while in continuous mode)Resolution:±0.1°F or ±0.1°CResponse Time:10 seconds typical (oral)AlarmsIndication:Volume:Silence:TrendsMemory:Parameters:Report Types:Audible; Visual10 levels or OFFYes; 2 minutes or permanentLast 24 hoursNIBP, SpO2, pulse rate, temperatureSingle patient or Multi-patient; Selectable formatsDisplayType:Parameters:Status:Text:Languages:System OutputsCOM Port:Printer (optional)Type:Tabular Mode:Physical PropertiesWeight:Size:Power RequirementsVoltage:Battery:Battery Life:Recharge Time:CE mark not applicable to TurboTemp TMmodels.Quality systems registered to ISO 13485 and CE marking per Annex II, Clause 3of Council Directive No. 93/42/EEC concerning medical devices.Configurations AvailableLEDSpO2, pulse rate, NIBP, temperature, pulse barAlarm Silence; Sensor; Low Battery; External Power;Patient SizeAlphanumeric LCDEnglish, French, German, Italian, Portuguese, Spanish,Dutch, DanishSerial, RS 232 compatibleThermal array1 to 60 minute intervals; 2 to 24 hour intervals;Auto on BP; Auto on Alarm; OffBase unit with battery: 6.95 lbs; 3.1 kgBase unit: 8.7 in (H) x 7.1 in (W) x 6.5 in (D)22 cm (H) x 18 cm (W) x 16.5 cm (D)100, 120, 220, 240 VAC; 50/60 Hz1 sealed lead acid8.0 hours, typical6.5 hours, typicalEnvironmentalOperating Temperature: 32° to 113°F (0° to 45°C)Storage Temperature: 23° to 122°F (-5° to 50°C)Operating Humidity: 15% to 90%, noncondensingClassificationElectrical Protection: Class I EquipmentDegree of Protection: Type CF, Defibrillator-proofProtection Against Ingress: IPX1, Drip-proof Equipment506N3 NIBP506NP3 NIBP, printer506NT3 NIBP, FILAC FasTemp TM temperature506NTP3 NIBP, FILAC FasTemp TM temperature, printer506DN3 NIBP, DOX TM SpO2506DNP3 NIBP, DOX TM SpO2, printer506DNT3 NIBP, DOX TM SpO2, FILAC FasTemp TM temperature506DNTP3 NIBP, DOX TM SpO2, FILAC FasTemp TM temperature, printer506LN3 NIBP, OxiMax TM SpO2506LNP3 NIBP, OxiMax TM SpO2, printer506LNT3 NIBP, OxiMax TM SpO2, FILAC FasTemp TM temperature506LNTP3 NIBP, OxiMax TM SpO2, FILAC FasTemp TM temperature, printer506NV3 NIBP, TurboTemp TM temperature506NVP3 NIBP, TurboTemp TM temperature, printer506DNV3 NIBP, DOX TM SpO2, TurboTemp TM temperature506LNV3 NIBP, OxiMax TM SpO2, TurboTemp TM temperature506DNVP3 NIBP, DOX TM SpO2, TurboTemp TM temperature, printer506LNVP3 NIBP, OxiMax TM SpO2, TurboTemp TM temperature, printerSpecifications subject to change without notice.1 9 8 4 - 2 0 0 92 5 YE A R S O F E XC E L L E N C ECorporate Headquarters Customer Support20925 Crossroads Circle Tel: 262.798.8282 or 800.458.4615Waukesha, WI 53186 USA Fax: 262.798.8290Web: www.csiusa.com©2009 Criticare Systems, Inc. P/N 48127B001, Rev. 4